Audio Menu - Zenith B25A10Z Service Manuallines

LOCK ON/OFF
This item turns the Parental Control feature On / Off.
The PC feature can only be turned on if the hours > 0,
and a password has been set. Otherwise the Lock On/
Off line will display either of the following error messages:
("Must Set Hours") or ("Must Set Password.")
REENTERING PARENTAL CONTROL
If the Parental Control feature has been activated, the
software will not allow immediately entry into the Parental
Control Menu—instead, it will prompt for the correct
password. If the correct password is entered, the
Parental Control menu will appear, with the highlighted
item "Lock On/Off", which assumes that the customer
most likely wants to turn the feature off. If an incorrect
password is entered, an error message ("Not Accepted!)
appears, and will not disappear until 5 seconds has
elapsed. This extended time provision increases the
amount of time necessary for a child to "crack" the
password.
Notes:
•
The Parental Control menu will remain up to 10
seconds after the last key is pressed.
•
The QUIT key may be pressed to remove the PC menu.
•
Entry into the Factory Menu will immediately turn
off the PC feature.
•
The PC Hours and Password will be cleared upon
exit of the PC menu (unless the PC feature has been
turned on).
EZ DEMO
The EZ Demo is designed to show-off the icon menus
and other icon displays on the sales floor, it will show
also the scroll function. The EZ Demo feature can be
turned on/off with the Left/Right Arrow keys.
Initially, when the feature is activated, as soon as the
OSD times out, the EZ Demo will start. At this point,
pressing any key will temporarily disable the EZ Demo
for 18 seconds, and if the EZ Demo is working and Menu
key is pressed then the Setup Menu will be displayed
and the EZ Demo ON/OFF will be displayed to allow the
customer to enable or disable.
Notes:
•
When the Setup Menu is displayed, the highlighted
line item is always 'Add/Del/Surf' and the current
channel is temporarily made to be 'Surf' so that
the moving surfer can be demonstrated.
•
This channel will revert to its original 'Add/Del/
Surf' setting with the next channel change.
CM151
USER MENUS 221-1385 (Continued)
•
Zenith VCR, Zenith Cable, and Zenith Private Label
TV codes will not temporarily disable the EZ
Demo—only Zenith TV codes will be accepted.
•
The Auto Demo on/off setting is not stored to the
EEPROM.
•
The Sleep Timer is suspended while the EZ Demo is
set on.

AUDIO MENU

All menu items are adjustment with the Left/Right Arrow
keys.
Audio Menu
Bass
Ttreble
Balance
Audio Mode
Front Surr
EZ SoundRite
Speakers
EZ Sound Ctl
BASS
Bass adjustment has 15 steps (0 to 14).
TREBLE
Treble adjustment has 15 steps (0 to 14).
BALANCE
Balance adjustment has 29 steps (0 to 28).
AUDIO MODE
There are three audio modes available: Mono, Stereo,
nd
2 Audio/SAP.
If 2 nd Audio/SAP is selected, but the current channel
does not support SAP, then either Stereo or Mono will
be heard.
FRONT SURROUND
Front Surround can be set 'ON' or 'Off', regardless of the
current Audio Mode setting. However, the Front Surround
effect can only be heard when the Audio Mode has been
set to 'Stereo' and a Stereo signal is present. When this
condition exists, there will be a short mute (200ms)
while toggling the Surround 'On' to 'Off', to embellish
Front Surround activation.
1-18
CA - 1385 MENUS