Digital Operator; Digital Operator Display; Digital Operator Keys - YASKAWA Varispeed G7 Instruction Manual

Digital Operator

This section describes the displays and functions of the Digital Operator.

Digital Operator Display

The key names and functions of the Digital Operator are described below.

Digital Operator Keys

The names and functions of the Digital Operator Keys are described in Table 3.1.
Key
-2
3
Frequency Ref
Fig 3.1 Digital Operator Component Names and Functions
Name
LOCAL/REMOTE Key
MENU Key
ESC Key
JOG Key
Drive Mode Indicators (LED)
FWD: Lit when there is a Forward Run Command input.
REV: Lit when there is a Reverse Run Command input.
SEQ: Lit when the Run Command from the control
circuit terminal is enabled.
REF: Lit when the frequency reference from control
circuit terminals A1 and A2 is enabled.
ALARM: Lit when error activated.
Blinks when alarm activated.
Data Display
Displays monitor data, constant numbers, and settings.
Mode Display (Displayed at upper left of data display.)
DRIVE: Lit in Drive Mode.
QUICK: Lit in Quick Programming Mode.
ADV: Lit in Advanced Programming Mode.
VERIFY: Lit in Verify Mode.
A. TUNE: Lit in Autotuning Mode.
Keys
Execute operations such as setting user constants,
monitoring, jogging, and autotuning.
Table 3.1 Key Functions
Switches between operation via the Digital Operator (LOCAL) and
control circuit terminal operation (REMOTE).
This Key can be enabled or disabled by setting user constant o2-01.
Selects menu items (modes).
Returns to the status before the DATA/ENTER Key was pressed.
Enables jog operation when the Inverter is being operated from the
Digital Operator.
Function