Using A Vs Operator - YASKAWA Varispeed G7 Instruction Manual

Using a VS Operator

This example shows wiring for using a VS Operator. The VS Operator model number is JVOP-95•
JVOP-96 • .
CIMR-G7A27P5 (200 V Class Inverters of 7.5 kW)
3-phase power
JVOP-95• , C-96•
-24
10
Short-circuit bar
(Standard)
MCCB
VS Operator
Frequency meter
R/L1
U/T1
Inverter
V/T2
S/L2
W/T3
T/L3
Forward Run Command
(forward run when closed)
Reverse Run Command
(reverse run when closed)
Multi-function contact inputs
Sequence common (0 V)
Shield terminal
Speed setting power (15 V, 20 mA)
Master speed (0 to 10 V, 20 kΩ)
Master speed (4 to 20 mA, 250 Ω)
Multi-function contact
output (Default: Running
signal)
Fault contact output
Multi-function
analog output
Multi-function
analog output
(Default: Output
frequency)
Fig 10.13
Motor
Ground to 100 Ω max.
Open collector 1 (Default:
Zero-speed signal)
Multi-function open-
Open collector 2 (Default:
collector output 48 V,
Speed agreement signal)
50 mA max.
Multi-function output
common
or