Commissioning - Rinnai RHFE-309FT Operation And Installation Manual

14.Fit left and right cover panels to the rear of the appliance by
clipping the panels onto the location tabs (i) then fastening
into position using the two 6g x 8mm pan head screws (ii)
supplied. These screws locate into pre-drilled and formed
recesses at the bottom edge of the panels
15.Remove the Fan Filter (iii).
16.Carefully fit the top cover panel ensuring the rear fold
locates neatly between the two securing brackets and wall.
17.Secure the top cover panel with two 6g x 8mm pan head
screws supplied (iv).
18.Replace the Fan Filter (v).
Air hose and heater exhaust connections at
the Energysaver heater MUST be made and
CAUTION
checked
instructions. Improper connections may
result in dangerous situations, for example,
the dispersion of combustion products in
the space being heated.
NOT INTENDED FOR FIREPLACE INSERT.
NOTE
Rear cover panels MUST BE fitted to ensure
correct and safe operation of the appliance.
WARNING Failure to fit the rear cover panels may
result in unsafe operation of the appliance
and void the warranty.
For Commissioning Instructions, refer to the Commissioning sheet attached behind the front panel of this appliance.
Rinnai
HEATER INSTALLATION
in accordance with

COMMISSIONING

Left
Cover
Panel
these
iv ii
iv
27
Top
Cover
Panel
Right
Cover
Panel
i
i
iii
iv
Energysaver Operation & Installation Manual
iv ii
v