Removing The Oven Temperature Sensor - Whirlpool SF3000SE W Service Manual

REMOVING THE OVEN TEMPERATURE SENSOR

WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electrical
shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
1. Pull the range away from the wall so that you
can access the back.
2. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
3. From behind the range, remove the lower
access cover.
OVEN TEMPERATURE
LOWER ACCESS
4. Disconnect the wire harness from the old
oven temperature sensor and remove the
sensor from the range.
REAR PANEL
OF OVEN
OVEN TEMPERATURE
SENSOR
5. Mount the new oven temperature sensor to
the range and connect the wire harness.
6. Reassemble the range.
3-22
SENSOR
COVER
MOUNTING
SCREWS
2-WIRE
SENSOR
CONNECTOR
2-WIRE
HARNESS
CONNECTOR