Cabinet Dimensions - Whirlpool SF3000SE W Service Manual

Use only the cabinet opening dimensions that are
shown below. The dimensions shown are for mini-
mum clearances.
A grounded electrical outlet is required (see page
1-4).
A proper gas supply connection must be available
(see page 1-6).
18 " min.
clearance upper
cabinet to
countertop
2 " minimum
countertop
space to side
wall or other
combustible
material
Contact a qualified
floor covering installer
to check that the floor
covering can withstand
at least 90˚F above
room temperature.
Use an insulated
pad, or 1/4 " plywood
under the range if
installing the range
over carpeting.
The Anti-Tip bracket MUST be
installed. (See page 1-7 for
details.)

CABINET DIMENSIONS

max. upper
cabinet depth
30 " min.
cabinet opening width
1 " min.
30- /
8
opening width
8 "
2 "
4-1/2 "
Clearance Note: A clearance of 30 " minimum is
required when the bottom of a wood or metal
cabinet is protected by not less than
retardant millboard covered with not less than #28
MSG sheet steel, 0.015 " stainless steel, 0.024 "
aluminum, or 0.020 " copper. A minimum clearance
of 36 " between the top of the cooking platform and
the bottom of an unprotected wood or metal cabi-
net is required.
13 "
26 "
Do not pinch the power cord be-
tween the range and the wall when
you push the range into its mount-
ing location.
The shaded area shown in the il-
lustration is the recommended area
for installation of rigid gas pipe.
1-2
1 " of flame-
/
4
Refer to
"Clearance
Note" above.
Do not seal the range to
the side cabinets.
If the cabinet depth
is greater than 24 " , the
oven frame must extend
beyond the cabinet
front by 1/2 " minimum.