Adjusting The Air Shutters - Whirlpool SF3000SE W Service Manual

SEALED BURNERS
1. Lift the maintop and prop it up (see page 1-12
for the procedure).
2. Remove the control knobs.
3. Open the oven door and remove the three
screws from the bottom of the manifold panel,
then pull down slightly on the panel, and pull
it away from the range.
KNOB
SCREWS
4. Use a screwdriver blade, and adjust the air
shutter, as needed. Close the air shutter to
decrease the amount of air to the flame. Open
the air shutter to increase the amount of air to
the flame.
5. Replace the manifold panel and control knobs
and lower the maintop.

Adjusting The Air Shutters

MANIFOLD PANEL
venturi air shutter
CONVENTIONAL BURNERS
1. Lift the maintop until the support rods lock.
2. Adjust the air shutter openings, as needed.
Close the air shutter to decrease the amount
of air to the flame. Open the air shutter to
increase the amount of air to the flame.
3. Lower the maintop.
1-16
air shutter