Adjusting The Oven Temperature Control - Whirlpool RM975PXK Manual

1
~-~~ __T
"ip
Put the racklsl where YOU
Lift rack at front and pull out
want them before turning on
the oven.
Rack(s) should be placed
H so food can be centered in
-
the oven. Always leave at
least 1' 2 to 2 inches (4-5 cm)
between the sides of the pan
and the oven walls and pans.
For more information, see the
"Cooklng Guide."
Set the Oven Selector on
BAKE
Set the Oven Temperature
Control to the baking
temperature you want.
Let the oven preheat until the
Signal Light goes off
During baking, the elements
will turn on and off to help
keep the oven temperature
at the setting. The Signal Light
will turn on and off with the
elements.
The top element helps heat
during baking, but does not
Put food in the oven Over turn red
When baking is done. turn
rock. we//s and door WI// be no1 + both knobs to OFF
ADJUSTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder than your old oven at the
same settings7 The temperature setting In your old oven may have changed
gradually overthe years The accurate setting of your new oven can seem differ-
ent If you think the oven temperature needs adjusting, follow these steps:
Locking Screw
1. Pu.ll the Oven Tem-
2.
Loosen the lock- 3. To lower the tern- 4. To raise the tem-
perature Control
rng screw
perature. move
straight 08
NOTICE posrtion
perature, move
black part of black part of
of notches
knob closer to LO knob closer to HI.
Each notch
Each notch
equals about 10 F
equals about 10 F
(5 Cl.
(5 Cl.
Tighten the locking screw. Replace the knob.
12