JVC RV-DP100BK Instructions Manual page 22

Changing the Playing Rhythm
Pattern ———————————————
(During playing the
rhythm pattern)
(Within 5 seconds)
1. During playing the rhythm pattern, press
MODE button on the Unit to select your
favorite Rhythm mode.
2. Within five seconds, turn the Jog dial to
select your favorite rhythm pattern.
The selected rhythm pattern will be played.
Adjusting the Tempo During
Playback ——————————————
1. During playing the rhythm pattern, press
the TEMPO button on the Unit.
The current tempo appears on the display for five seconds.
2. Within five seconds, turn the Jog dial to
increase or decrease the tempo.
You can adjust the tempo between 60 and 160.
• The tempo you have changed will be maintained even when
the System is turned off. However, it will be reset to the in-
itial value when you select other rhythm pattern.
Generating Scratch Sound
You can generate two kinds of scratch sound (scratch-high and
scratch-low) by turning the Jog dial.
The scratch sound can be mixed with the following all sources to-
gether.
• BIRDS, WAVES, or rhythm pattern generated from the
Rhythm Machine
• Dram pad pattern generated from the Rhythm Machine
• Music source except Tuner
• MIC and Guitar inputs
SCRATCH
[Pad Pattern Table]
PAD MODE
STD DR
(Standard Drum)
Pad
A Standard-Bass Drum
B Standard Snare
C Standard-Closed Hihat
D Power-Crash Cymbal
Abbreviations:
STD DR: Standard drum kit (bass, snare, high-hat, cymbal) PWR DR: Power drum kit TOM+HI: Tomtom and high-hat group
PERCUS: Percussion, ethnic percussion VOICE: Voice and onomatopoeic sounds
18
1. Press the SCRATCH button on the Unit.
"SCRATCH" will appear on the display.
2. Turn the Jog dial to generate the scratch
(Playing rhythm
sound.
pattern changes.)
When you turn the Jog dial clockwise or counterclockwise, the
scratch-high sound or scratch-low sound will be generated, re-
spectively. When you turn the Jog dial rapidly, the scratch
sound will be generated continuously.
To stop the scratch sound generation, press the
SCRATCH button once again to display "OFF".
Note: You cannot generate the scratch sound if Tuner is selected.
Generating the Pad Pattern
You can generate 20 pad patterns by pressing the Drum Pads A to
D on the Unit. Pad patterns are assigned to the Drum Pads A to D in
each Pad mode as shown in the "Pad Pattern Table".
The pad pattern can be mixed with the following all sources together.
• BIRDS, WAVES, or rhythm pattern generated from the
Rhythm Machine
• Scratch sound generated from the Rhythm Machine
• Music source except Tuner
• MIC and Guitar inputs
1. Press the PAD MODE button on the Unit to
select Pad mode.
Each time you press the button, mode changes as follows.
STD DR
OFF
2. Press the Drum Pads A to D on the Unit.
Each time you press the Pad, corresponding pad pattern which
is shown in the "Pad Pattern Table" will be generated.
Note: You cannot play the Pad pattern if Tuner is selected.
PWR DR TOM+HI
(Tom + Hihat) (Tom & Hihat)
Power-Bass Drum High Floor Tom
Power Snare Low Floor Tom
Power-Closed Hihat Open Hihat
Power-Crash Cym- Pedal Hihat
bal
PAD MODE
= = =
PWR DR TOM+HI PERCUS
=
(back to the beginning)
PERCUS
(Percussion) (Voice, etc.)
High Agogo Marian
Low Agogo Yeh!
Open Hi Conga Gun
Hand Clap Engine
= =
VOICE
OFF
VOICE
—
—
—
—