Basic Operations - JVC RV-DP100BK Instructions Manual

Basic Operations

TIMER
CLOCK TIMER ON/OFF
SLEEP
DOWN UP SET
PROGRAM
RANDOM
AUTO
PRESET REPEAT
TUNER
AUX CD TAPE
BAND
FM MODE
REVERSE MODE REW FF
MULTI CONTROL
DISPLAY
DISPLAY
MID /
TREBLE
SUPER
WOOFER
SUPER WOOFER VOLUME
VOLUME+,–
VOLUME
RM-SRVDP100E
REMOTE CONTROL
Turning the Power On and Off
Note: The lighting condition for the "STANDBY" indicator and
the display differs depending on the power source being
used, as follows:
Power source "STANDBY" indicator/Display
• The "STANDBY" indicator lights when
power is turned off.
AC power
• Backlighting of the display is illuminated
when power is turned on.
• The "STANDBY" indicator does not light.
Batteries or car
• Backlighting of the display is not
battery (DC12V)
illuminated.
Turning the System On ——————
% % % %
Press the button.
• When the System is operated on batteries or car battery
(DC12V), press the % button on the Unit.
The "STANDBY" indicator goes out when the System is operated
on AC power.
The display comes on and the System is ready to continue in the
mode it was in when the power was last turned off.
%
or
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
If you were listening to the Tuner last, the Tuner comes on play-
ing the station it was last set to.
Turning the System Off ——————
Press the % % button.
% %
The "STANDBY" indicator lights up when the System is operated
on AC power.
The contents of the display changes to the clock, and "CLOCK" in-
dicator and the time are displayed without backlighting.
%
or
6
%
MID/
TREBLE
SUPER
VOLUME+,–
WOOFER
VOLUME+,–
STANDBY indicator
%
STANDBY
STANDBY
SUPER WOOFER
VOLUME VOLUME
MID / TREBLE
PRESET ONE TOUCH MID / BAND
TUNING REC TREBLE MULTI CONTROL
STANDBY
%
C D TAPE TUNER AUX
REW STOP FF
STANDBY/ON
OPEN
Some power is always consumed even though power is turned
off (called Standby Mode).
To switch off the System completely, unplug the AC power
cord from the AC outlet. When you unplug the AC power cord,
the clock will be reset to "0:00" when no memory backup bat-
teries are installed.
Adjusting the Volume
You can adjust the volume level between 0 and 50.
Using the Unit ————————————
Turn the VOLUME control clockwise to increase the volume or
turn it counterclockwise to decrease the volume.
Using the Remote Control —————
Press the VOLUME + button to increase the volume or press the
VOLUME – button to decrease it.
When you keep pressed the VOLUME + or – button, the volume
changes rapidly.
CAUTION: DO NOT start playing any source with-
out first setting the volume to minimum, as a sud-
den blast of sound can damage your hearing,
speakers and/or headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
PHONES
AUX IN PHONES
12V
DC IN
AC IN
VOLUME +, –
MID/
TREBLE