JVC RV-DP100BK Instructions Manual page 11

Adjusting the Super Woofer
Volume
You can adjust the bass level between BASS 1 (minimum) and
BASS 6 (maximum). You can use this effect only for playback.
Using the Unit ———————————
Turn the SUPER WOOFER VOLUME control clockwise to in-
crease the bass level or turn it counterclockwise to decrease the bass
level.
SUPER WOOFER
VOLUME
or
Using the Remote Control —————
Press the SUPER WOOFER VOLUME + button to increase the
bass level or press the SUPER WOOFER VOLUME – button to de-
crease it.
Note: This function is not effective when the headphones are in
use.
Tone Control (MID/TREBLE)
You can control the tone by changing the mid and the treble be-
tween –6 and +6. (0: Flat)
Using the Unit ———————————
1. Press the MID/TREBLE button to select MID
or TREBLE.
Each time you press the button, the display changes as follows:
MID=TREBLE=Currect sound source=(back to the
beginning)
2. Turn the VOLUME control clockwise or
counterclockwise within five seconds to
adjust the mid/treble level.
MID /
TREBLE
(Within 5 seconds)
SUPER WOOFER
VOLUME
VOLUME
MID / TREBLE
Using the Remote Control —————
1. Press the MID/TREBLE button to select MID
or TREBLE.
Each time you press the button, the display changes as follows:
MID=TREBLE=Currect sound source=(back to the
beginning)
2. Press the VOLUME + or VOLUME – button
within five seconds to adjust the mid or tre-
ble level.
MID /
TREBLE
(Within 5 seconds)
Showing the Time (DISPLAY)
In Standby mode, the backlight of the display goes out, and the
"CLOCK" indicator and the current time (clock) appear on the dis-
play.
While the power is turned on, you can see the current time (clock)
at any time, as follows:
Press the DISPLAY button on the Remote Control. Each time you
press the button, the display changes as follows:
Current sound source (e.g. FM103.50 MHz)=Clock=(back to the
beginning)
Note: To let work the clock, you need to set the clock first. (See
"Setting the Clock" on page 22.)
VOLUME
7