Table of Contents
Advertisement
Super Finish 7000
1.23
SetuP ON AN uNeVeN SuRFAce
The front end must always point downwards in order to avoid
sliding away.
If possible do not use the unit on an inclined surface since the
unit tends to wander through the resulting vibrations.
2
GeNeRAl VIeW OF APPlIcAtION
2.1
APPlIcAtION
Super Finish 7000 is an electric driven unit for the airless ato-
mization of different painting materials. Also it is able to feed
the internal feeded paint roller, which is available as accesso-
ry.
The performance of the Super Finish 7000 is designed to en-
able processing of dispersions for large objects both indoors
and outdoors (e.g. ceilings, facades, underground garages,
etc.). The use of corrosion protection and fire protection is also
possible.
The unit is able for all common varnishing jobs like
doors, door frames, balustrades, furniture, woodencladding,
fences, radiators (heating) and steel parts.
The device is prepared for operation with several guns. How-
ever, this requires appropriate accessories, which are available
separately.
2.2
cOAtING MAteRIAl
Dispersion and latex paints, two-component coating materi-
als, diluting lacquers and paints or those containing solvents.
No other materials should be used for spraying without
WAGNER's approval.
Pay attention to the Airless quality of the coa-
ting materials to be processed.
The unit is able to process coating materials with up to
15,000 mPas. If highly viscous coating materials cannot be ta-
ken in or the performance of the unit is to low, the paint must
be diluted in accordance with the manufacturer's instruc-
tions.
Multi-gun operation is not possible when
working with high viscosity coating materials.
Stir coating substance well before commencing work.
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles
are stirred in. Air bubbles disturb when spra-
ying and can, in fact, lead to interruption of
operation.
2.2.1
cOAtING MAteRIAlS WItH SHARP-edGed
AddItIONAl MAteRIAlS
These particles have a strong wear and tear effect on valves
and tips, but also on the heating hose and spray gun. This im-
pairs the durability of these wearing parts considerably.
2.2.2
FIlteRING
Sufficient filtering is required for fault-free operation. To this
purpose the unit is equipped with a suction filter (Item 1) and
an insertion filter in the spray gun (Item 2). Regular inspection
of these filters for damage or soiling is urgently recommen-
ded.
A high-pressure filter (Item 3) -available as accessory- is rising
up the filtering surface and will make the work more comfor-
table.
GB
safety regulatIons
37
Hide quick links:
Advertisement
Table of Contents
