RECEIVER AND SERVO INSTALLATION
Receiver and servos connection
Connect the receiver and servos in accordance with the connection diagram shown below. Always read the
section [Before using]. When mounting the receiver and servos to the fuselage, connect the necessary points
in accordance with the model's instruction manual.
Receiver and servos connection diagram
Always connect the necessary number of servos.
The receiver channel assignment depends on the
model type. See the Servo connection by model
type tables.
R7008SB
CH1~6: Output connectors 1~6
Charging port
40
<Receiver and Servo Installation>
(output connector section)
CH1~8,
B
Receiver battery
Receiver switch
Servos