Basic Operations; Turning On The Power - JVC KD-LX555R Instructions Manual

Turning on the power

1
Turn on the power.
The display illuminates and the
control panel and control dial
come out.
2
Select the source.
Each time you press the button,
ATT
the source changes as follows:
SOURCE
= FM = DAB tuner*
= CD changer*
1
= AM = (back to the beginning)
1
* Without connecting the CD changer and/or
the DAB tuner, you cannot select it as the
source to play.
2
* If a disc is not in the loading slot, you cannot
select "CD" as the source to play.
3
* To select the external component, set the
"EXT INPUT" setting to "LINE INPUT."
(See page 33.)
To operate the tuner (FM or AM),
see pages 9 – 11.
To play back a CD,
see pages 19 – 21.
To play back an MP3 disc,
see pages 24 – 28.
To operate the CD changer,
see pages 38 – 41.
To operate the external component,
see page 42.
To operate the DAB tuner,
see pages 43 – 46.
1
= CD*
1 2
(or External component*

BASIC OPERATIONS

BAND
ATT
EQ
SEL TP/PTY DISP MODE
7
S T D M
SOURCE
3 2
3
Adjust the volume.
4
Adjust the sound as you want (see
pages 29 and 30).
To drop the volume in a moment
3
)
Press SOURCE ATT for more than 1 second
while listening to any source. "ATT" rotates on
the display, and the volume level will drop in a
moment.
To resume the previous volume level, press the
button for more than 1 second again.
To turn off the power
Press and hold OFF 0 until "SEE YOU" appears
on the display.
• If you turn off the power while listening to a
disc, you can start disc playback from where
you have stopped next time you turn on the
power.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 8.
Note on display illustrations:
Illustrations will differ from what appears if
"CLOCK DISP" is set to "CLOCK OFF."
See page 32.
KD-LX555R
MONO INT RPT RND OFF
8 9 12
To increase the volume
To decrease the volume
Volume level appears.
7