Storing Dab Services In Memory - JVC KD-LX555R Instructions Manual

4
Select a service you want to listen
to.
1 Press BAND MODE (M).
BAND
MODE
M
2 Press
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP (D).
Each time you press the button, the following
information appears for a while on the display.
To tune in to a particular ensemble
without searching:
1
Press SOURCE ATT to select DAB tuner as
the source.
2
Press BAND MODE (M) repeatedly to select
the DAB band (DAB1, DAB2 or DAB3).
3
Press and hold
than 1 second.
¢ or 4
4
Press
ensemble you want is reached.
• If you hold down the button, the ensemble
keeps changing until you release the button.
5
Select a service you want to listen to.
1 Press BAND MODE (M).
"MODE" appears on the display.
¢ or 4
2 Press
you want, while "MODE" is still on the
display.
44
"MODE" appears on the
display.
¢ or 4
select a service you want,
while "MODE" is still on the
display.
Service name
Ensemble name
Channel number
Frequency
¢ or 4
for more
repeatedly until the
to select a service
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner (DAB1 – 3).
to
ATT
SOURCE
BAND
MODE
M
Each time you press and hold the button,
the DAB band changes as follows:
D1
(DAB1)
2
Tune in to an ensemble you want.
3
Select a service of the ensemble you
want.
BAND
MODE
M
1 Press SOURCE ATT to select
DAB tuner as the source.
2 If necessary, press and hold
BAND MODE (M) repeatedly
to select the DAB band
number (DAB1, DAB2 or
DAB3).
D2 D3
(DAB2) (DAB3)
1 Press BAND MODE (M).
"MODE" appears on the
display.
¢ or 4
2 Press
select a service you want,
while "MODE" is still on the
display.
to