Page 1
CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-LX555R This unit is equipped with the display demonstration. To cancel it, see page 8. Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf Seite 8 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel. 4.CAUTION: This CD player uses invisible laser radiation and is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ... LOCATION OF THE BUTTONS ...
RPT (repeat) button y RND (random) button u OFF 0 (eject) button MO indicator lights up. Ex.: When you press number button 2 while listening to an FM station KD-LX555R ¢ / 4 buttons work as Time countdown indicator...
Remote controller RM-RK60 1 • Turns on the unit if pressed when the unit is turned off. • Turns off the unit if pressed and held until “SEE YOU” appears on the display. • Drops the volume level if pressed briefly, and “ATT”...
• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. KD-LX555R • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing the battery...
8. Note on display illustrations: Illustrations will differ from what appears if “CLOCK DISP” is set to “CLOCK OFF.” See page 32. KD-LX555R MONO To increase the volume To decrease the volume Volume level appears.
Canceling the demonstration When shipped from the factory, demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time. To cancel the demonstration, follow the procedure below.
FM band changes as follows: Selected band appears. Note: This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast. RADIO BASIC OPERATIONS KD-LX555R MONO BAND MONO MODE SOURCE Start searching a station.
Press and hold until “M (manual)” starts flashing on the display. Tune in to a station you want while “M” is flashing. Press stations of higher frequencies. Press 4 stations of lower frequencies. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band Select the band (in this example, FM1).
RDS OPERATIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.
Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 31 and 32.) Select “AF–REG (Alternative frequency/Regionalization reception)” if not shown on the display. Select the desired mode – “AF,” “AF REG”...
Page 14
Using PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favourite programme (PTY: Programme Type) from the current source (another FM station or CD). • PTY Standby Reception will not work if you are listening to an AM station. You can select your favourite programme type for PTY Standby Reception.
Searching your favorite programme You can search any one of the PTY codes. In addition, you can store your 6 favorite programme types in the number buttons. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6).
To search your favorite programme type Press and hold TP/PTY (T) for more than 2 seconds while listening to an FM station. TP/PTY The last selected PTY code appears. Select one of the PTY codes. MONO Preset number appears only if you select a PTY code using the number buttons.
Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQUENCY), while listening to an FM RDS station. • See also “Changing the general settings (PSM)”...
Page 18
PTY codes NEWS: News AFFAIRS: Topical programmes expanding on current news or affairs INFO: Programmes which impart advice on a wide variety of topics SPORT: Sport events EDUCATE: Educational programmes DRAMA: Radio plays CULTURE: Programmes on national or regional culture SCIENCE: Programmes on natural science and technology...
• If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play will start from where you have stopped. CD OPERATIONS KD-LX555R MONO BAND MONO MODE SOURCE...
Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold playing a CD, to fast-forward the track. Press and hold 4 playing a CD, to reverse the track. To go to the next tracks or the previous tracks ¢...
To play back only intros (Track Intro Scan) You can play back the first 15 seconds of each track sequentially. BAND 1 Press BAND MODE (M) while MODE playing a CD. “MODE” appears on the display. 2 Press INT (intro scan), while “MODE”...
MP3 INTRODUCTION What is MP3? MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can.
Page 23
MP3 folder/file configuration : Root ROOT : Folders : MP3 files Note: There is no limit on the number of the hierarchy levels (nested folders). However, it is recommended to limit the numbers of hierarchy levels up to 8 for stable operations. MP3 playback/search order •...
• If you change the source or turn the power off, disc playback stops (without ejecting the disc). Next time you select disc play as the source or turn the power on, disc playback starts from where playback has been stopped previously. KD-LX555R MONO BAND MONO MODE...
To stop play and eject the disc Press OFF 0 briefly. Disc play stops, the display panel moves down, then the disc automatically ejects from the loading slot. To move up the display panel, press or 4 . If no button is pressed, the display panel will move up in about 5 minutes.
Locating a file or a particular portion on an MP3 disc For “MP3 playback/search order” see page 23. To fast-forward or reverse the file Press and hold playing an MP3 disc, to fast-forward the file. Press and hold 4 playing an MP3 disc, to reverse the file.
To skip to the next or previous folder Press BAND MODE (M) to enter BAND MODE the functions mode while playing an MP3 disc. “MODE” appears on the display. ¢ or 4 Press “MODE” is still on the display. Each time you press the button consecutively, the next folder is located (and the first file in the folder starts playing).
Page 28
To play back files repeatedly (Track Repeat/Folder Repeat Play) You can play back the current file or all the files in the current folder repeatedly. Press BAND MODE (M) to enter BAND MODE the functions mode while playing an MP3 disc. “MODE”...
Adjusting the sound You can adjust the sound characteristics to your preference. Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: (balance) (fader) VOLUME S.BASS (volume) (super bass) Indication To do: FAD* Adjust the front and rear speaker...
Storing your own sound adjustments You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3). • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
Changing the general settings (PSM) You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. Basic Procedure Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display.
Page 32
Preferred Setting Mode (PSM) items Indications TA VOL Traffic announcement volume P-SEARCH Programme search DAB AF* Alternative frequency search DAB VOL* DAB volume adjustment LEVEL Level display DIMMER Dimmer mode TELEPHONE Telephone muting BEEP SW Key-touch tone CONTRAST Display contrast SCROLL Scroll mode EXT INPUT...
Page 33
To select the dimmer mode— When you turn on the car head lights, the display automatically dims (Auto Dimmer). When shipped from the factory, Auto Dimmer mode is activated. • AUTO: Activates Auto Dimmer. • OFF: Cancels Auto Dimmer. • ON: Always dims the display.
Page 34
To make the front panel look flat (hiding the control panel)— FLAT PANEL When operating the receiver using the remote control, you can hide the control panel to make the front panel look flat. When shipped from the factory, “FLAT OFF” is selected. •...
Assigning names to the sources You can assign names to CDs and the external component. After assigning a name, it will appear on the display when you select the source. Sources Maximum number of the characters CDs* and Up to 32 characters (up CD changer* to 40 discs) External component Up to 10 characters...
Using the security lock You can prohibit the unauthorized use of this unit by the others. To use the security lock, you need to set the password first. Once you set the password, the unit will ask you to enter the password when you turn on the unit for the first time after re-installation (or after recovering the car battery exhaustion).
Page 37
When Security Lock works? Once you register the password, “ appears on the display, and the unit will ask you to enter the password in the following cases: • When you turn on the unit for the first time after re-installing the unit.
MODE SOURCE TP/PTY DISP We recommend that you use the JVC MP3 compatible CD changer with your unit. By using this CD changer, you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format.
Page 39
• When the current disc is an MP3 disc: Playback starts from the first folder of the current disc once file check is completed. Current disc number Elapsed playing time Current file number MP3 indicator • When the current disc is a CD: Playback starts from the first track of the current disc.
If the folder does not contain any MP3 files, it is skipped. To show the disc information for CD Text and MP3 discs This is possible only when connecting a JVC CD changer equipped with CD Text and/or MP3 disc information reading capability. Select text display mode while playing a CD Text or an MP3 disc.
Page 41
To play back tracks/files repeatedly (Track Repeat/Folder Repeat/Disc Repeat Play) BAND Press BAND MODE (M) to enter MODE the functions mode during play. “MODE” appears on the display. Press RPT (repeat), while “MODE” is still on the display. Each time you press the button, the repeat play mode changes as follows: For MP3 discs:...
SOURCE the source changes as described on page 7. • If “LINE INPUT” does not appear on the display, see page 33 and select the external input (“LINE INPUT”). KD-LX555R MONO BAND MONO MODE SOURCE Turn on the connected component and start playing the source.
DISP We recommend that you use DAB (Digital Audio Broadcasting) tuner KT-DB1000 or KT-DB1500 with your unit. If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer. • Refer also to the Instructions supplied with your DAB tuner.
Select a service you want to listen 1 Press BAND MODE (M). BAND MODE “MODE” appears on the display. 2 Press select a service you want, while “MODE” is still on the display. To change the display information while tuning in to an ensemble Normally service name is shown on the display.
Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds. “PI” flashes for a few seconds. Repeat the above procedure to store other DAB services into other preset numbers.
What you can do more with Tracing the same program automatically (Alternative Reception) You can keep listening to the same program. • While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in another ensemble or FM RDS station, broadcasting the same program.
Signals are too weak. The antenna is not connected firmly. Disc is inserted upside down. CD-R/CD-RW is not finalized. Disc is locked. The CD player may function incorrectly. Remedies Adjust it to the optimum level. Check the cords and connections.
Page 48
Symptoms • Disc sound is sometimes interrupted. • “NO DISC” appears on the display. • Disc cannot be played back. • Noise is generated. • A longer readout time is required (“FILE CHECK” keeps flashing on the display). • Files cannot be played back as you have intended them to play.
Page 49
Symptoms • “NO DISC” appears on the display. • “NO MAG” appears on the display. • “RESET 8” appears on the display. • “RESET 1” – “RESET 7” appears on the display. • The CD changer does not work at all. Sound modes (preset value settings) The list below shows the preset value settings for each sound mode (see page 29).
• After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.
Sensitivity: 20 µV Selectivity: 35 dB [LW Tuner] Sensitivity: 50 µV SPECIFICATIONS CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz...
Page 52
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à...
Neem bij vragen of voor meer bijzonderheden over inbouwpakketten contact op met uw JVC car audio dealer of een dealer of een bedrijf dat inbouwpakketten levert.
Hinweis: vehicle does not have this system, a voltage Dieses Gerät ist für einen Betrieb in elektrischen inverter is required, which can be purchased at JVC Anlagen mit 12 V Gleichstrom und (–) Erdung IN-CAR ENTERTAINMENT dealers. ausgelegt. Verfügt Ihr Fahrzeug nicht über diese Anlage, ist ein Spannungsinverter erforderlich, der •...
Page 55
Die Kabelbäume am Gerät anschließen. Finalement, connectez le faisceau de fils à l’appareil. We recommend you to connect the JVC MP3 compatible CD changer. You can also connect other CH-X series CD CD changer or another changers (except CH-X99 and CH-X100).
If your car is equipped with the steering wheel remote controller, you can operate this receiver using the controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
Page 57
Canceling the demonstration / Deaktivieren der Demonstration / Annulation de la démonstration / De demonstratie annuleren / Cancelación de la demostración / Per annullare la dimostrazione ENGLISH When shipped from the factory, demonstration has been activated, and starts automatically when no operations are done for about 20 seconds.
Page 58
CAUTION / ACHTUNG / ATTENTION / LET OP / ATENCION / ATTENZIONE ENGLISH To install this unit, attach the trim plate to the unit first, then fit the unit into the mounting sleeve by pressing the four corners of the trim plate.