External Component Operations; Playing An External Component - JVC KD-LX555R Instructions Manual

EXTERNAL COMPONENT OPERATIONS

SEL TP/PTY
S T
SEL
S

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See "To select the external component to
use—EXT INPUT" on page 33.
1
Select the external component
(LINE INPUT).
Each time you press the button,
ATT
SOURCE
the source changes as described
on page 7.
• If "LINE INPUT" does not appear on the display,
see page 33 and select the external input ("LINE
INPUT").
42
BAND
ATT EQ MONO INT
DISP MODE
9
7 8
D M
SOURCE
BAND
TP/PTY DISP MODE
T D M
SOURCE
KD-LX555R
RPT RND OFF
12
ATT
EQ MONO
9
8
7
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 29 and 30.)
Press ON CLOSE to
turn on the power.
KD-LX555R
INT RPT RND OFF
12