Humminbird 800 series Operation Manual page 49

1
2
1 "Playback" indicates the control head is playing
a saved recording.
Open the X-Press™ Menu to adjust
2
Playback settings.
You can also use Freeze Frame and mark waypoints.
Stop Playback:
1. Press the MENU key once to open the Snapshot and Recording
X-Press™ Menu.
2. Highlight Stop Playback, and press the RIGHT Cursor key.
1
1 From Snapshot and Recording View, select
Delete Recording from the X-Press™ Menu.
Change Playback Settings:
1. Press the MENU key once to
open the Snapshot and
Recording X-Press™ Menu.
2. Use the X-Press™ Menu to
adjust the Sonar Recording's
Sensitivity, Upper Range,
Lower Range, and the
Playback Speed. See
Snapshot and Recording
X-Press™ Menu for details.
Delete a Recording:
1. From the Snapshot and
Recording View, press the UP
or DOWN Cursor keys to
scroll through the saved files
and highlight a saved
Recording.
2. Press the Menu key once,
and select Delete Recording
from the X-Press™ Menu.
Press the RIGHT Cursor key.
Notes about Playback:
• "Playback" will flash periodically on the screen to indicate that the
control head is playing a saved recording and not a "live" view.
• Navigation is not affected by the Sonar Recording feature, but any
active navigation is cancelled and thumbnails and icons disappear
when Playback begins or ends.
• Playback is paused automatically at the end of the recording.
• Freeze Frame: Press the 4-WAY Cursor Control key to pause Playback
and move the Active Cursor to a location on the sonar view. The
Cursor dialog box will show the depth and information for the
location you choose. Press Exit to resume Playback.
• Press the MARK key during Playback to save a Screen Snapshot
and/or mark a waypoint in the view or active cursor location you
choose.
39 Views