Humminbird 800 series Operation Manual page 46

Snapshot and Recording View
1
4
3
2
1 Recording icon
2
Snapshot thumbnail
3
Unavailable icon
4
Information box
NOTE: For snapshots and recordings, the indicator bar has several states: during
recording, the amount of space remaining on the SD card is indicated on the
status bar. During playback, the amount of time/memory remaining to play is
indicated on the status bar. When a snapshot thumbnail is highlighted, the
amount of room remaining on the SD card is indicated.
Views
6
7
5
8
Amount of recording left to play
Recording mode icons
Amount of recording that has been played
Amount of space used for this recording
Screen Snapshots
Screen Snapshots are saved pictures of the view on the screen. The screen
snapshot will include the menus, dialog boxes, warnings, and messages that
were active when the screen snapshot was taken. Saved Screen Snapshots
can be viewed from the Snapshot and Recording View or Chart View.
5
The Screen Snapshot feature is available when an optional-purchase SD
memory card is installed and Screen Snapshot is On (see Accessories Menu
Tab: Screen Snapshot).
5
6
7
8
1
Waypoint saved at Cursor Location
2
Screen Snapshot Confirmation
3
File Name
A waypoint will also be created at the boat or active cursor location. The
screen snapshot shares the same file name (.PNG).
36
Make a Screen Snapshot:
1. Activate Screen Snapshot
and install an SD card.
1
2. From any view or cursor
2
3
location you want to capture,
press the MARK key. The
screen will pause while the
image is saved.