Map Datum (Advanced); North-Up Indicator; Course Projection Line; 3D View Outline - Humminbird 800 series Operation Manual

Map Datum
(Advanced)
Settings: Various, Default = WGS 84
Map Datum allows you to change the map coordinate system used by the
Fishing System to match those of a paper map.

North-Up Indicator

Settings: On, Off; Default = Off
North-Up allows you to display the North-Up icon on the screen to indicate
the direction of True North. The icon also displays the Chart Orientation, and
it will change as the orientation and the data source change. To set the
Chart Orientation, see Navigation Menu Tab. Also, see Views: View
Orientation.

Course Projection Line

Settings: Hidden, Standard, Single Vector,
COG/SOG; Default = Standard
Course Projection Line displays an arrow or line, extending from the bow of
the boat, that projects your current course and shows where the boat will go
if you continue on your present course.
You can choose the style of the Course Projection Line as follows:
• Standard = arrow
• Single Vector = line
• COG/SOG = line with tick marks at set intervals from the boat. The
tick marks are based on the speed calculation.
Navigation Menu Tab
3D View Outline allows you to display or hide an outline on the Chart side
of either Chart or Bird's Eye Combo Views that shows what you're viewing
on the Bird's Eye side of the view.
Continuous Navigation Mode allows you to continue to navigate and fish
around a particular waypoint, even if you pass over it multiple times.
SI Navigation controls how the boat icon is displayed in Side Imaging®
Views. If SI Navigation is turned on, the boat icon indicates the direction the
boat needs to turn to reach the next waypoint during navigation. The boat
icon color will also change to orange.
If SI Navigation is turned Off, the boat icon will not change during navigation
although you can still mark waypoints and start navigation from a Side
Imaging® View. See Side Imaging® View and Introduction to Navigation for
more information.
102

3D View Outline

Settings: Hidden, Visible, Default = Visible

Continuous Navigation Mode

Settings: Off, On, Default = Off
SI Navigation
(Side Imaging® models only [899ci HD SI and
999ci HD SI])
Settings: Off, On, Default = On