Removing A Version 2 Ac Or Dc Power Module - Cisco ASR 9000 Series Installation Manual

Removing and Replacing Power System Components
Figure 5-8

Removing a Version 2 AC or DC Power Module

Follow these steps to remove a version 2 AC or DC power module from the chassis (see
Cisco ASR 9904 Router chassis only has one power tray as shown in
Unscrew the screw that secures the power module using a 7/16 hex socket and torque wrench with the
Note
torque set to 50 in-lb.
Pull the handle down.
Step 4
Slide the power module out of its bay while supporting it with your other hand.
Step 5
Caution Use two hands to remove the power module. The power supply weighs about 6.5 pounds (2.95 kg).
Figure 5-9
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
5-14
Removing or Installing a Version 1 AC or DC Power Module
Removing or Installing a Version 2 AC or DC Power Module
Chapter 5 Replacing Cisco ASR 9000 Series Router Components
Figure
Figure 5-9). The
5-10.