Cisco ASR 9000 Series Installation Manual page 186

Installing Cards in the Chassis
Figure 3-10
1
1 Slide the card into the
chassis.
Repeat
Step 4
Note
Go to the
Step 5
interface cables.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
3-16
Installing a Line Card into the Cisco ASR 9912 Router Chassis
3
2
Step 1 through Step 3 for each line card.
In the Cisco ASR 9922 Router, up to ten line cards are installed in slots 0 through 9 in the top
card cage, and up to ten line cards are installed upside down in slots 10 through 19 in the bottom
card cage.
"Connecting Line Card Network Interface Cables" section on page 3-17
Chapter 3
2 Pivot the ejector levers to
seat the card into the
backplane connector.
Installing Cards and Modules in the Chassis
3
Tighten the captive screws.
to connect the network