Installing Cards in the Chassis
Figure 3-4
Note: Vertical red lines in
1 Slightly loose position of
ejector levers when the RSP
card is fully seated in the
backplane, but the captive
installation screws are not
fully tightened
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
3-8
RSP Card Ejector Lever Positions During Installation
1
1
Figure 3-4
indicate a line fully parallel to the RSP card front panel.
2 Fully parallel position of
ejector levers when the RSP
card is fully seated in the
backplane and captive
installation screws are fully
tightened
Chapter 3
Installing Cards and Modules in the Chassis
2
2
3
3
Slight gap that may be
present when the RSP card is
fully seated in the backplane
and captive installation
screws are fully tightened