Front Seat Belt Buckle; Rear Seat Belt Buckle - Renault FLUENCE Technical Training Manual

Technical Specifications
Airbag Systems

Front seat belt buckle

Position the vehicle on a two-post lift, Disconnect the front seat belt buckle connector (1).
Unclip the front seat belt buckle wiring at (2). Remove: the bolt (3) from the front seat belt
buckle.
Refitting
Always replace the bolt of the front seat belt buckle. Refit the front seat belt buckle.
Torque tighten the bolt of the front seat belt buckle (25 N.m). Clip on the front seat belt buckle
wiring. Connect the front seat belt buckle connector. Check that the front seat belts buckle
connector is properly connected by pulling the wiring harness downwards with a force of
between 10 N and 30 N. Refit the front seat, Connect the battery, Switch on the ignition. Check
that the warning light on the display or on the instrument panel illuminates. Fasten the front
seat belts. Check that the warning light on the display or on the instrument panel goes out.

Rear seat belt buckle

Switch off the ignition. Remove the rear bench seat base, remove: the bolts (13) from the rear
seat belt buckles, remove the rear seat belt buckles (14) and (15) 137776; 137777
The bolt for the buckle (13) also secures the rear centre seat belt.
Refitting
All ways replace the buckle bolt (31,02,01,51). [
rear seat belt Refit the rear seat belt buckles by
inserting the lugs in the floor holes. Torque tighten the bolts of the rear seat belt buckles (21 N.m).
Refit the rear bench seat base.]
Page 37
Technical Training Renault Fluence