License Plate Lamp - Chrysler 1998 Viper RT/10 Owner's Manual

S R
LAMPS 8L - 15
R E M O V A L A N D I N S T A L L A T I O N
{Continued)
Fig. 8 Tail and Stop Lamp
(4) I n s t a l l plastic seal nuts to hold the t a i l lamp to
the t a i l lamp closure panel through the access holes.
(5) I n s t a l l the plugs to cover the access holes i n
the t r u n k pan for the t a i l lamp.
(6) I n s t a l l the t r u n k lining.
LICENSE PLATE LAMP
REMOVAL
(1) Remove license plate.
(2) Remove screws holding license plate lamp clo-
sure panel to the t a i l lamp closure panel.
(3) Separate the license plate lamp closure panel
from the t a i l lamp closure panel (Fig. 9).
(4) Rotate and p u l l license plate lamp socket from
the license plate lamp.
(5) Remove screws holding the lamp to the lamp
panel (Fig. 10).
(6) Separate the lamp from the lamp panel.
I N S T A L L A T I O N
(1) Position the license plate lamp to the lamp clo-
sure panel.
(2) I n s t a l l screws to hold the lamp to the lamp clo-
sure panel.
Fig. 9 License Plate Lamp Closure Panel
L I C E N S E P L A T E L A M P
8 0 a 5 f 2 8 d
Fig. 10 License Plate Lamp
(3) Insert license plate lamp socket into license
plate lamp and rotate.
(4) Position license plate lamp closure panel to the
t a i l lamp closure panel.
(5) I n s t a l l screws to hold the license plate lamp
closure panel to the t a i l lamp closure panel.
(6) I n s t a l l license plate.