Page 1 R A M T R U C K 2 0 1 4 1 5 0 0 / 2 5 0 0 / 3 5 0 0 O W N E R ’ S M A N U A L...
Page 2 With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or name Chrysler Canada Inc. used in substitution therefore.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfac- LLC vehicle. Be assured that it represents precision tion.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS Operating instructions for the special equipment in- stalled by the conversion/camper manufacturer should This Owners Manual contains WARNINGS against op- also be supplied with your vehicle. If these instructions erating procedures that could result in a collision or are missing, please contact your authorized dealer for bodily injury.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 frame and underbody as well as the Automobile Infor- VEHICLE MODIFICATIONS/ALTERATIONS mation Disclosure Label affixed to a window on your vehicle, the vehicle registration and title. WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
Page 11: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .12 VEHICLE SECURITY ALARM ....21 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm ....29 WINDOWS ......47 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Enhanced Seat Belt Use Reminder System ▫ Child Restraints ..... . .83 (BeltAlert®) .
Page 14: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Node Module (IGNM) — If Equipped Your vehicle uses either a key start ignition system or The Ignition Node Module (IGNM) operates similar to an keyless ignition system. The key start ignition system ignition switch.
Page 15: Keyless Ignition Node (Kin) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Keyless Ignition Node (KIN) — If Equipped This feature allows the driver to operate the ignition switch with the push of a button, as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment.
Page 16: Key Fob
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion.
Page 17 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Emergency Key Removal (IGNM) Emergency Key Removal Keyless Enter-N-Go™ Fob (KIN) NOTE: You can insert the double-sided emergency key into the lock cylinder with either side up.
Page 18: Removing Key Fob From Ignition
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Removing Key Fob From Ignition Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Place the shift lever in PARK (if equipped with an Features)” in “Understanding Your Instrument Panel” automatic transmission). Turn the Key Fob to the OFF for further information.
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 WARNING! WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or • Before exiting a vehicle, always apply the parking in a location accessible to children, and do not brake, shift the transmission into PARK, and push leave the ignition of a vehicle equipped with ignition button to place ignition in OFF position.
Page 20: Key-In-Ignition Reminder
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder SENTRY KEY® Opening the driver’s door when the Key Fob is in the The Sentry Key® Immobilizer System prevents unau- ignition and the ignition switch position is OFF or ACC, thorized vehicle operation by disabling the engine.
Page 21: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 During normal operation, after turning on the ignition CAUTION! switch, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the The Sentry Key® Immobilizer system is not compat- bulb check, it indicates that there is a problem with the ible with some aftermarket remote starting systems.
Page 22: Customer Key Programming
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When having the Sentry Key® Immobilizer Sys- CAUTION! tem serviced, bring all vehicle keys with you to an • Always remove the Key Fobs from the vehicle and authorized dealer. lock all doors when leaving the vehicle unat- Customer Key Programming tended.
Page 23: Vehicle Security Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 VEHICLE SECURITY ALARM To Arm The System The Vehicle Security Alarm monitors the vehicle doors The Vehicle Security Alarm will set when you use the and ignition for unauthorized operation. When the Ve- power door locks, or use the Remote Keyless Entry (RKE) hicle Security Alarm is activated, interior switches for transmitter to lock the doors.
Page 24: Security System Manual Override
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Security Alarm will also disarm if a pro- ILLUMINATED ENTRY grammed Sentry Key® is inserted into the ignition The courtesy lights will turn on when you use the switch. To exit the alarming mode, press the RKE trans- Remote Keyless Entry (RKE) transmitter to unlock the mitter UNLOCK button, or insert a programmed Sentry doors or open any door.
Page 25: Remote Keyless Entry (Rke)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 NOTE: REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock all doors, • The front courtesy overhead console and door cour- tailgate, and the RamBox® (if equipped) as well as activate tesy lights will not turn off if the dimmer control is in the Panic Alarm from distances up to approximately 66 ft the “Dome ON”...
Page 26 24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the Key Fob with RKE transmitter into the ignition switch disables the system from responding to any button presses from that RKE transmitter. Driving at speeds 5 mph (8 km/h) and above disables the system from responding to all RKE transmitter buttons for all RKE transmitters.
Page 27: Remote Unlock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. NOTE: The EVIC is setup for driver door first, otherwise this will unlock all doors . Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver’s door or all doors on the first press of the...
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following procedure: ter while you are inside the vehicle will activate the Vehicle Security Alarm System. Opening a door with the 1.
Page 29: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmit- following procedure: ter while you are in the vehicle will activate the Vehicle Security Alarm System.
Page 30: Sound Horn With Remote Key Lock
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Remote Key Lock 2. Release both buttons at the same time. This feature will cause the horn to chirp when the doors 3. Test the feature while outside of the vehicle by press- are locked with the RKE transmitter.
Page 31: Using The Panic Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • You may need to be less than 35 ft (11 m) from the Using The Panic Alarm vehicle when using the RKE transmitter to turn off the To turn the Panic Alarm feature ON or OFF, press and Panic Alarm due to the radio frequency noises emitted hold the PANIC button on the RKE transmitter for at by the system.
Page 32: Programming Additional Transmitters
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The vehicle battery must be fully charged. Programming Additional Transmitters If you do not have a programmed RKE transmitter, All doors must be closed. contact your authorized dealer for details. The ignition key must be out of the vehicle. Transmitter Battery Replacement Cancelling Remote Lowering Vehicle lowering can be The recommended replacement battery is one CR2032...
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Ignition Node Module (IGNM) Emergency Key Removal Keyless Ignition Node (KIN) Emergency Key Removal 2. Separating RKE halves requires screw removal and gently prying the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal.
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remove Screw From Transmitter Case Separating Ignition Node Module (IGNM) Transmitter Case...
Page 35: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 clip, located on the back cover. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE transmitter case, snap the two halves together, reposition and secure the screw as shown in step #2 for removal.
Page 36: Remote Starting System - If Equipped
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly ap- NOTE: proved by the party responsible for compliance could • The vehicle must be equipped with an automatic void the user’s authority to operate the equipment. transmission to be equipped with Remote Start.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • Battery at an acceptable charge level Remote Start Abort Message On Electronic Vehicle Information Center (EVIC) — If Equipped • RKE PANIC button not pressed The following messages will display in the EVIC if the •...
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For security, power window and power sunroof op- To Enter Remote Start Mode eration (if equipped) are disabled when the vehicle is in the Remote Start mode. Press and release the REMOTE START button •...
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 To Exit Remote Start Mode And Drive The Vehicle Remote Start Comfort Systems — If Equipped Before the end of the 15-minute cycle, press and release When remote start is activated, the heated steering wheel the UNLOCK button on the RKE transmitter to unlock and driver heated seat features will automatically turn on the doors and disarm the Vehicle Security Alarm System...
Page 40: Door Locks
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS Front doors may be opened with the inside door handle without lifting the lock knob. Manual Door Locks Doors locked before closing will remain locked when Front and rear doors may be locked by moving the lock closed.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 WARNING! (Continued) WARNING! (Continued) • Before exiting a vehicle, always turn the vehicle • Do not leave the Key Fob in or near the vehicle, or OFF, apply the parking brake, shift the automatic in a location accessible to children, and do not transmission into PARK or the manual transmis- leave the ignition of a vehicle equipped with...
Page 42: Power Door Locks - If Equipped
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks — If Equipped If you press the power door LOCK switch while the Key Fob is in the ignition, and any front door is open, the A power door LOCK switch is on each front door trim power locks will not operate.
Page 43: Child-Protection Door Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Automatic Doors Unlock — If Equipped Child-Protection Door Lock This feature unlocks all of the doors of the vehicle when To provide a safer environment for children riding in the either front door is opened. This will occur only after the rear seat, the rear doors (if equipped) of your vehicle vehicle has been shifted into the PARK position after the have the Child-Protection Door Lock system.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE engage and disengage the Child-Protection locks. When WARNING! the system on a door is engaged, that door can only be opened by using the outside door handle even if the Avoid trapping anyone in a vehicle in a collision. inside door lock is in the unlocked position.
Page 45: Keyless Enter-N-Go
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • If the vehicle is unlocked by the Passive Entry Door KEYLESS ENTER-N-GO™ Handle, and no door goes ajar within 60 seconds, the The Passive Entry system is an enhancement to the vehicle will re-lock and if equipped will arm the theft vehicle’s Remote Keyless Entry (RKE) system and a alarm.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all doors automatically. The interior door panel lock knob will raise when the door is unlocked.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 If one of the vehicle doors is open and the door panel To Lock The Vehicle’s Doors switch is used to lock the vehicle, once all open doors With one of the vehicle’s Passive Entry RKE transmitters have been closed the vehicle checks the inside and within 5 ft (1.5 m) of the driver or passenger front door outside of the vehicle for any valid Passive Entry RKE...
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do NOT grab the door handle when pressing the door NOTE: handle lock button. This could unlock the door(s). • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 49: Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WINDOWS The control on the left front door panel has UP-DOWN switches that give you fingertip control of all power Power Windows – If Equipped windows. There is a single opening and closing switch on the front passenger door for passenger window control and on the rear doors of the Quad Cab and Crew Cab models.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Down WARNING! Both the driver and front passenger window switch have • Never leave children alone in a vehicle, or with an Auto-Down feature. Press the window switch past the access to an unlocked vehicle. Allowing children to first detent, release, and the window will go down be in a vehicle unattended is dangerous for a automatically.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 To stop the window from going all the way up during the WARNING! Auto Up operation, push down on the switch briefly. There is no anti-pinch protection when the window To close the window part way, lift the window switch to is almost closed.
Page 52: Wind Buffeting
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open. Window LOCKOUT Switch (4–Door Models Only) The window LOCKOUT switch on the driver’s door allows you to disable the window control on the rear...
Page 53: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 • Supplemental Side Air Bag Inflatable Curtains (SABIC) open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with — if equipped the rear windows open, then open the front and rear •...
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you will be carrying children too small for adult-sized WARNING! seat belts, the seat belts or the Lower Anchors and Tether • Never place a rear facing infant seat in front of an for CHildren (LATCH) feature also can be used to hold infant and child restraint systems.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 If a child from 2 to 12 years old (not in a rear facing child 5. If the air bag system in this vehicle needs to be seat) must ride in the front passenger seat, move the seat modified to accommodate a disabled person, contact as far back as possible and use the proper child restraint.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • Being too close to the steering wheel or instrument • Being too close to the Supplemental Side Air Bag panel during Advanced Front Air Bag deployment Inflatable Curtain (SABIC) and/or Seat-Mounted could cause serious injury, including death.
Page 57: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Lap/Shoulder Belts WARNING! (Continued) All seating positions except the Quad Cab®, Mega Cab® • Do not allow people to ride in any area of your and Crew Cab front center seating position have combi- vehicle that is not equipped with seats and seat nation lap/shoulder belts.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Two people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly. Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! • A belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal inju- ries. Always buckle your belt into the buckle nearest you.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A belt that is worn under your arm is dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A belt worn under the arm can cause internal injuries.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed posi- • A lap belt worn too high can increase the risk of tion.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Regular Cab Front Center Three Point Belt 1. The front center seat belt on the Regular Cab may be disconnected to open up utilization of the storage areas behind the front seats. The black latch plate can be detached from the black keyed seat belt buckle located on the inboard side of the passenger seat.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Inserting Latch Plate In Use Position...
Page 64: Lap/Shoulder Belt Untwisting Procedure
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, WARNING! grasp and twist the belt webbing 180 degrees to create • If the black latch and black buckle are not properly a fold that begins immediately above the latch plate.
Page 65: Center Lap Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Center Lap Belts The center seating position for the Quad Cab®, Mega Cab® and Crew Cab front seat has a lap belt only. To fasten the lap belt, slide the latch plate into the buckle until you hear a “click”.
Page 66: Seat Belts In Passenger Seating Positions
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts In Passenger Seating Positions For Standard Cab Only The seat belts in the passenger seating positions are Driver Center Passenger equipped with either a switchable Automatic Locking First Row Retractors (ALR) or with a Cinching Latchplate which is Second Row used to secure a child restraint system.
Page 67: Automatic Locking Retractor (Alr) Mode - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Automatic Locking Retractor (ALR) Mode – If 3. Allow the belt to retract. As the belt retracts, you will Equipped hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. In this mode, the shoulder belt is automatically pre- locked.
Page 68: Energy Management Feature
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Energy Management Feature NOTE: These devices are not a substitute for proper seat belt placement by the occupant. The seat belt still must be This vehicle has a safety belt system with an Energy worn snugly and positioned properly.
Page 69: Seat Belts And Pregnant Women
Once the sequence starts, it will continue for the entire BeltAlert® can be enabled or disabled by your autho- duration or until the respective seatbelts are fastened. rized dealer. Chrysler Group LLC does not recommend After the sequence completes, the Seat Belt Reminder deactivating BeltAlert®.
Page 70: Seat Belt Extender
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pregnant women should wear the lap part of the belt WARNING! across the thighs and as snug across the hips as possible. Keep the belt low so that it does not come across the Using a seat belt extender when not needed can in- abdomen.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation based on several factors, including the severity and type of collision. This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether the driver or front passenger seat belt is fastened.
Page 72: Air Bag System Components
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Steering Wheel and Column This vehicle is equipped with Supplemental Seat- Mounted Side Air Bags (SAB) to provide enhanced • Instrument Panel protection for an occupant during a side impact. The •...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 output appropriate to the severity and type of collision as WARNING! (Continued) determined by the Occupant Restraint Controller (ORC), • Do not put anything on or around the air bag covers which may receive information from the front impact or attempt to open them manually.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags (SAB) When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover. Each air bag Supplemental Seat-Mounted Side Air Bags may provide deploys independently;...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 • Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed. • Should a vehicle rollover occur, the pretensioners (if equipped) and/or SAB and SABIC air bags on both sides of the vehicle may deploy.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAB and SABIC air bags are a supplement to the seat belt WARNING! restraint system. Occupants, including children who are • If your vehicle is equipped with left and right up against or very close to SAB or SABIC air bags can be seriously injured or killed.
Page 77: Air Bag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Along with seat belts and pretensioners, Advanced Front including the severity and type of collision. Advanced Air Bags work with the knee impact bolsters to provide Front Air Bags are not expected to reduce the risk of improved protection for the driver and front passenger.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat belts are necessary for your protection in all colli- turns on the Air Bag Warning Light, either momentarily sions, and also are needed to help keep you in position, or continuously. A single chime will sound if the light away from an inflating air bag.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Driver And Passenger Advanced Front Air Bag The Advanced Front Air Bag gas is vented through the Inflator Units vent holes in the sides of the air bag. In this way, the air bags do not interfere with your control of the vehicle.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE you if you are not seated properly, or if items are inflates. This especially applies to children. The side positioned in the area where the side air bag inflates. This curtain air bag is only about 3-1/2 in (9 cm) thick when especially applies to children.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Enhanced Accident Response System In order to reset the Enhanced Accident Response System functions after an event, the ignition switch must be In the event of an impact causing air bag deployment, if changed from IGN ON to IGN OFF.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE They are not permanent and normally heal quickly. Do not drive your vehicle after the air bags have de- However, if you haven’t healed significantly within a ployed. If you are involved in another collision, the air few days, or if you have any blistering, see your doctor bags will not be in place to protect you.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Maintaining Your Air Bag System WARNING! (Continued) • Do not attempt to modify any part of your air bag WARNING! system. The air bag may inflate accidentally or may • Modifications to any part of the air bag system not function properly if modifications are made.
Page 84: Event Data Recorder (Edr)
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The air bags may You will want to have the air bags ready to not be ready to inflate for your protection.
Page 85: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 • How various systems in your vehicle were operating; To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. • Whether or not the driver and passenger safety belts In addition to the vehicle manufacturer, other parties, were buckled/fastened;...
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer to www.seatcheck.org enough for an adult safety belt. Always check the child or call 1–866–SEATCHECK.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Summary Of Recommendations For Restraining Children In Vehicles Recommended Type of Child Size, Height, Weight or Age Child Restraint Infants and Tod- Children who are two years old or Either an Infant Carrier or a Convertible dlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints reach the highest weight or height allowed by their convertible child seat. Safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until WARNING! they reach either the height or weight limit of their rear facing child safety seat.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 have outgrown the rear-facing weight or height limit of WARNING! their rear-facing convertible child seat. Children should • Improper installation can lead to failure of an remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height infant or child restraint.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats 4. Is the lap part of the belt as low as possible, touching the child’s thighs and not their stomach? Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend 5.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Recommendations For Attaching Child Restraints — Quad Cab®/Crew Cab Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors...
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints — Standard Cab, Mega Cab® Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors...
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Lower Anchors and Tethers for Children (LATCH) seating position. These anchorages are used to install Restraint System LATCH-equipped child seats without using the vehicle’s seat belts. Some seating positions may have a top tether anchorage but no lower anchorages.
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Standard Cab Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol...
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Quad Cab®/Crew Cab Full Bench Quad Cab®/Mega Cab®/Crew Cab Split Bench Lower Anchorage Symbol 2 anchorages per seating Lower Anchorage Symbol 2 anchorages per seating position position Top Tether Anchorage Symbol Top Tether Anchorage Symbol...
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Quad Cab®/Crew Cab What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Can two child restraints be attached using a Never “share” a LATCH anchorage with two common lower LATCH anchorage? or more child restraints. If the center posi- tion does not have dedicated LATCH lower anchorages, use the seat belt to install a child seat in the center position next to a child seat using the LATCH anchorages in an out-...
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Mega Cab®/Standard Cab What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Can the rear-facing child restraint touch the The child seat may touch the back of the back of the front passenger seat? front passenger seat if the child restraint manufacturer also allows contact. See your child restraint owner’s manual for more in- formation.
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages — Quad Cab®/Mega Cab®/Crew Cab The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Locating The LATCH Anchorages In addition, Regular Cab models have tether strap anchorages behind the front center and right seats. Quad Cab®, Mega Cab® and Crew Cab models have tether strap anchorages lo- cated behind each of the rear seats.
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether strap. The tether strap will have a hook at the end to attach to the top tether anchorage and a way to tighten the strap after it is attached to the anchorage. Center Seat LATCH —...
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Center Seat LATCH — Quad Cab®/Mega To Install A LATCH-compatible Child Restraint Cab®/Crew Cab Split Bench 1. If the selected seating position has a Switchable Auto- If a child restraint installed in the center position blocks matic Locking Retractor (ALR) seat belt, stow the seat the seat belt webbing or buckle for the outboard position, belt following the instructions below.
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE move it to its rear-most position to make room for the path. It should not move more than 1 inch (25.4 mm) child seat. You may also move the front seat forward in any direction.
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 the child restraint installation, instead of buckling it types of seat belts are designed to keep the lap portion of behind the child restraint, route the seat belt through the the seat belt tight around the child restraint so that it is child restraint belt path and then buckle it.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle Quad Cab®/Mega Cab®/Crew Cab Standard Cab...
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 Quad Cab®/Crew Cab What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing Tether Anchor with the seat belt to attach a child restraint, up to the recommended...
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Mega Cab®/Standard Cab What is the weight limit (child’s weight + 65 lbs (29.5 kg) The Tether Anchor can be used with the weight of the child restraint) for using the seat belt until the combined weight of the Tether Anchor with the seat belt to attach a child and the child restraint is 65 lbs forward facing child restraint?
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. If the child restraint has a top tether strap and the a better fit. If the rear seat can be moved forward and seating position has a top tether anchorage, connect rearward in the vehicle, you may wish to move it to its the tether strap to the anchorage and tighten the tether rear-most position to make room for the child seat.
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 the tether strap to the anchorage and tighten the tether facing out, away from the child restraint. Repeat steps 4 strap. Refer to “Installing Child Restraints Using The to 6, above, to complete the installation of the child Top Tether Anchorage”...
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Place the child restraint on the seat and adjust the tether strap so that it will reach over the seat back, under the head restraint and to the tether anchor directly behind the seat. Regular Cab Tether Strap Mounting 1 —...
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 2. Route the tether strap to provide the most direct path between the anchorage and the child seat. The tether strap should go between the head restraint posts underneath the head restraint. You may need to adjust the head restraint to the upward position to pass the tether strap underneath the head restraint and be- tween its posts.
Page 114 112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Right or Left Outboard Seats: WARNING! 1. Raise the head restraint and reach between the rear Never place a rear facing infant seat in front of an air seat and rear glass to access the tether strap loop. bag.
Page 115 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 3. Pass the tether strap hook under the head restraint behind the child seat, though the tether strap loop behind the seat and over to the center tether strap loop. Tether Strap Loop With Center Head Restraint In Raised Position 2.
Page 116 114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Attach the hook to the center tether strap loop (see NOTE: If there are child seats in both of the outboard (left diagram). Tighten the tether strap according to the and right) seating positions, the tether strap hooks of child seat manufacturer’s instructions.
Page 117 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 3. Pass the tether strap hook under the head restraint behind the child seat, though the tether strap loop behind the seat and over to the right or left outboard tether strap loop. Tether Strap Loop With Head Restraint In Raised Position 2.
Page 118 116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Attach the hook to the outboard tether strap loop (see Installing Three Child Restraints: diagram). Tighten the tether strap according to the 1. Place a child restraint on each outboard rear seat. child seat manufacturer’s instructions.
Page 119 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap.
Page 120: Engine Break-In Recommendations
118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS CAUTION! A long break-in period is not required for the engine and Never use Non-Detergent Oil or Straight Mineral Oil drivetrain (transmission and axle) in your vehicle. in the engine or damage may result. Drive moderately during the first 300 miles (500 km).
Page 121: Exhaust Gas
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 Exhaust Gas WARNING! • Do not leave children or animals inside parked WARNING! vehicles in hot weather. Interior heat build-up may Exhaust gases can injure or kill. They contain carbon cause serious injury or death. monoxide (CO), which is colorless and odorless.
Page 122: Safety Checks You Should Make Inside The Vehicle
120 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The WARNING! (Continued) Vehicle • If it is necessary to sit in a parked vehicle with the Seat Belts engine running, adjust your heating or cooling controls to force outside air into the vehicle.
Page 123 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 121 dealer. If the light stays on, flickers, or comes on while WARNING! driving, have the system checked by an authorized dealer. Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- Defroster sonal injury.
Page 124: Periodic Safety Checks You Should Make Outside The Vehicle
122 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE lodged in the tread or sidewall. Inspect the tread for cuts WARNING! (Continued) and cracks. Inspect sidewalls for cuts, cracks and bulges. • Always make sure that objects cannot fall into the Check the wheel nuts for tightness.
Page 125: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Heated Mirrors — If Equipped ...141 MIRRORS ......130 ▫...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Power Lumbar — If Equipped ... .147 LIGHTS ......165 ▫...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 ▫ Interior Lights ..... . .171 ▫ Rain Sensing Wipers — If Equipped ..179 ▫...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ ParkSense® Sensors ....188 ▫ Enabling And Disabling Front And/Or Rear ParkSense® ......200 ▫...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 ▫ Before You Begin Programming HomeLink® . .211 ▫ Pinch Protect Feature ....221 ▫ Programming A Rolling Code ... .211 ▫...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Rear Cupholder — Quad Cab®... .230 ▫ Rear Window Defroster ....240 ▫...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 ▫ Bed Rail Tie-Down System ....259 ▫ Locking Tailgate ..... .264 SLIDE-IN CAMPERS .
Page 132: Mirrors
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. NOTE: • The Automatic Dimming Mirror feature is disabled when the vehicle is in reverse gear to improve rear view viewing.
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Assist Call 9-1-1 Call The rear view mirror contains an ASSIST push button 1. Press the 9-1-1 Call button on the Rearview Mirror; which automatically connects the vehicle occupants to NOTE: In case the 9-1-1 Call button is pushed in error, one of several predefined locations for immediate sup- there will be a 10 second delay before the 9-1-1 Call port:...
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • the vehicle brand; and 5. The 9-1-1 operator may attempt to contact appropriate emergency responders and provide them with impor- • the last known GPS coordinates of the vehicle. tant vehicle information and GPS coordinates. 4.
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9-1-1 Call System Limitations WARNING! (Continued) Vehicles sold in Canada and Mexico DO NOT have 9-1-1 • The 9-1-1 Call system is embedded into the vehi- Call system capabilities. cle’s electrical system. Do not add aftermarket electrical equipment to the vehicle’s electrical sys- 9-1-1 or other emergency line operators in Canada and tem.
Page 137 • Operator error by the 9-1-1 operator; Even if the 9-1-1 Call system is fully functional, factors • Wireless network congestion; beyond Chrysler Group LLC’s control may prevent or • Weather; and stop the 9-1-1 Call system operation. These include, but are not limited to, the following factors: •...
Page 138: Automatic Dimming Mirror With Rear View Camera Display - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Never place anything on or near the vehicle’s Automatic Dimming Mirror With Rear View wireless and GPS antennas. You could prevent wireless Camera Display — If Equipped and GPS signal reception, which can prevent your vehicle A single ball joint mirror is provided in the vehicle.
Page 139: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
Page 140: Power Folding Outside Mirrors - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Folding Outside Mirrors — If Equipped If equipped with power folding mirrors, they can be electrically folded rearward and unfolded into the drive position. The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right).
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 • The mirrors are accidentally manually folded/ unfolded. • The mirrors come out of the unfolded position. • The mirrors shake and vibrate at normal driving speeds. To reset the power folding mirrors: Fold and unfold them by pressing the button (this may require multiple button pushes).
Page 142: Power Mirrors - If Equipped
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors — If Equipped The controls for the power mirrors are located on the driver’s door trim panel. Power Mirror Controls 1 — Mirror Select Buttons 2 — Four-Way Mirror Control Switch Power Mirror Controls Location To adjust a mirror, press either the L (left) or R (right) The power mirror controls consist of mirror select but-...
Page 143: Heated Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Using the mirror control switch, press on any of the four rear window defroster (if equipped). Refer to “Rear arrows for the direction that you want the mirror to move Window Features” in “Understanding The Features Of Your Vehicle”...
Page 144: Slide-On-Rod" Features Of Sun Visor - If Equipped
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To use the “Slide-On-Rod” feature, rotate the sun visor downward and unclip it. Pull the sun visor along the “Slide-On-Rod” until the sun visor is in the desired position. Illuminated Vanity Mirror “Slide-On-Rod” Features Of Sun Visor — If Equipped The sun visor “Slide-On-Rod”...
Page 145: Trailer Towing Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Trailer Towing Mirrors — If Equipped NOTE: Fold the trailer towing mirrors rearward prior to entering an automated car wash. These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing A small blindspot mirror is located next to main mirror extra-wide loads.
Page 146: Seats
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS Driver’s Power Seat — If Equipped Seats are a part of the Occupant Restraint System of the Some models may be equipped with an eight-way power vehicle. driver’s seat. The power seat switches are located on the outboard side of the driver’s seat cushion.
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch, the seat will move in the direction of the switch.
Page 148: Passenger's Power Seat - If Equipped
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the seat will move in the direction of the switch. Release CAUTION! the switch when the desired position is reached. Do not place any article under a power seat or impede WARNING! its ability to move as it may cause damage to the seat controls.
Page 149: Power Lumbar - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats may be also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Heated Seats WARNING! There are two heated seat switches as well as soft-keys in • Persons who are unable to feel pain to the skin the radio that allow the driver and passenger to operate because of advanced age, chronic illness, diabetes, the seats independently.
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 NOTE: Vehicle Equipped With Remote Start • Once a heat setting is selected, heat will be felt within On models that are equipped with remote start, the two to five minutes. driver’s heated seat can be programmed to come on during a remote start.
Page 152: Ventilated Seats - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE There are two heated seat switches that allow the rear When the HIGH-level setting is selected, the heater will passengers to operate the seats independently. You can provide a boosted heat level during the first four minutes choose from HIGH, LOW or OFF heat settings.
Page 153: Manual Seat Adjuster - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 below the climate controls as well as soft-keys located in Vehicles Equipped With Remote Start the radio screen. The fans operate at two speeds, HIGH On models equipped with remote start, the drivers and LOW.
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 155: 40-20-40 Front Bench Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Mega Cab® Rear Seat Features WARNING! Reclining Rear Seats — If Equipped • Do not stand or lean in front of the seat while The recliner handle is located on the outside of the seat actuating the handle.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat (Table Mode) — If Equipped Both the left and right rear seatbacks can be folded down and used as a table. To fold down either rear seatback: 1. Lift the handle, located next to the head restraint. Rear Seat Recliner Handle WARNING! Do not ride with the seatback reclined so that the...
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 2. Fold the seatback forward. Folding Rear Seat — If Equipped Both the outboard rear seats will drop and move forward when the seatback is folded flat. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Cargo must be securely tied down before driving your vehicle. Improperly secured cargo can fly around in a sudden stop or collision and strike someone in the vehicle, causing serious injury or death.
Page 159: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! An improperly latched seat could cause serious in- jury or death. Make sure that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or passengers.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Page 161: Driver Memory Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer. DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles for easy recall through a memory switch.
Page 162: Programming The Memory Feature
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The memory seat buttons are located on the outboard Programming The Memory Feature side of the drivers seat cushion. NOTE: To create a new memory profile, perform the following: Vehicles Equipped With Keyless Enter-N-Go 1.
Page 163: Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Vehicles Not Equipped With Keyless Enter-N-Go NOTE: • Memory profiles can be set without the vehicle in 1. Insert the ignition key fob, and turn the ignition switch to the ON/RUN position. PARK, but the vehicle must be in PARK to recall a memory profile.
Page 164: Memory Position Recall
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Before programming your RKE transmitters you 3. Once the profile has been recalled, press and release must select the “Memory To FOB” feature through the the SET (S) button on the memory switch, then press Uconnect®...
Page 165: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Driver One Memory Position Recall TO OPEN AND CLOSE THE HOOD • To recall the memory settings for driver one using the To open the hood, two latches must be released. memory switch, press MEMORY button number 1 on 1.
Page 166 Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death. Safety Latch Location (1500 Series Shown)
Page 167: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 LIGHTS Your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less suscep- The headlight switch is located on the left side of the tible to stone breakage than glass lights. Plastic is not as instrument panel, next to the steering wheel.
Page 168: Headlights
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights To turn on the headlights, rotate the headlight switch clockwise to the headlight position. When the headlight switch is on, the parking lights, taillights, license plate light and instru- ment panel lights are also turned on. To turn off the headlights, rotate the headlight switch back to the O (Off) position.
Page 169: Headlights On With Wipers (Available With Automatic Headlights Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 NOTE: The engine must be running before the head- illuminate at less than 50% of normal intensity. If the lights will turn on in the Automatic Mode. parking brake is applied, the Daytime Running Lights (DRL) will turn OFF.
Page 170: Automatic High Beam Headlamp Control - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The headlight delay time is programmable on vehicles NOTE: equipped with an Electronic Vehicle Information Center • Automatic High Beam Headlamp Control can be (EVIC) or a Uconnect® system screen. Refer to “Elec- turned on or off using the Uconnect®...
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 To Activate To Deactivate Perform either of the following steps to deactivate the 1. Select “Automatic High Beams — ON” through the Automatic High Beam system. EVIC. Refer to “Electronic Vehicle Information Center (EVIC)/Customer-Programmable Features”...
Page 172: Parking Lights And Panel Lights
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Parking Lights And Panel Lights To turn on the parking lights and instrument panel lights, rotate the headlight switch clockwise. To turn off the parking lights, rotate the headlight switch back to the O (Off) position. Fog Lights —...
Page 173: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 turn off when the switch is pushed a second time, when eight minutes. If the headlights are turned on and left on the headlight switch is rotated to the off position, or the for eight minutes while the ignition is OFF, the exterior high beam is selected.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The brightness of the instrument panel as well as the ambient lighting can be regulated by rotating the dimmer control right (brighter) or left (dimmer). When the head- lights are on you can supplement the brightness of the odometer, trip odometer, radio and overhead console by rotating the control to the right until you hear a click.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
Page 176: Cargo Light
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ambient Light Cargo Light The overhead console is equipped with an ambient light The cargo lights are turned on by pressing on the cargo feature. This light casts illumination for improved visibil- button. ity of the floor console area.
Page 177: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Multifunction Lever The multifunction lever is located on the left side of the steering column. Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
Page 178: Lane Change Assist
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Flash-To-Pass You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer- ing wheel.
Page 179: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Intermittent Wiper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable. For maximum delay between cycles, rotate the control knob into the upper end of the delay range.
Page 180: Mist Feature
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE depressed while in the delay range, the wiper will WARNING! (Continued) operate for several seconds after the washer knob is the windshield during freezing weather, warm the released. It will then resume the intermittent interval windshield with the defroster before and during previously selected.
Page 181: Rain Sensing Wipers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Rain Sensing Wipers — If Equipped NOTE: • The Rain Sensing feature will not operate when the This feature senses moisture on the windshield and automatically activates the wipers for the driver. The wiper switch is in the low or high-speed position.
Page 182: Tilt Steering Column
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rain Sensing system has protection features for the Remote Start Mode Inhibit — On vehicles equipped wiper blades and arms, and will not operate under the with Remote Starting system, Rain Sensing wipers are following conditions: not operational when the vehicle is in the remote start mode.
Page 183: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 WARNING! (Continued) driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. HEATED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The heated steering wheel switch is located on the switch — If Equipped” in “Things to Know Before Starting Your bank below the climate controls. There are also soft-keys Vehicle” for further information. in the radio screen that will activate the heated steering wheel.
Page 185: Driver Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 DRIVER ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows the brake, accelerator, and clutch pedals (if equipped) to move toward or away from the driver to provide improved position with the steering wheel.
Page 186: Electronic Speed Control
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE adjusted when the system is locked out (“Adjustable CAUTION! Pedal Disabled — Cruise Control Engaged” or “Ad- justable Pedal Disabled — Vehicle In Reverse”. Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage NOTE: to the pedal controls.
Page 187: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 The Electronic Speed Control buttons are located on the NOTE: In order to ensure proper operation, the Elec- right side of the steering wheel. tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
Page 188: To Set A Desired Speed
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
Page 189: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Pressing the RES (+) button once will result in a 1 mph To Accelerate For Passing (1.0 km/h) increase in set speed. Each subsequent tap of Press the accelerator as you would normally. When the the button results in an increase of 1 mph (1.0 km/h).
Page 190: Parksense® Rear Park Assist - If Equipped
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® will retain the last system state (enabled or WARNING! disabled) from the last ignition cycle when the ignition is changed to the ON/RUN position. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
Page 191: Parksense® Warning Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 (200 cm) from the rear fascia/bumper in the horizontal fascia/bumper and the detected obstacle. Refer to “Elec- direction, depending on the location, type and orienta- tronic Vehicle Information Center (EVIC)/Settings” in tion of the obstacle. Understanding Your Instrument Panel”...
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Single 1/2 Second Tone Slow Tone...
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Fast Tone Continuous Tone The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle:...
Page 194: Enabling And Disabling Parksense
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Distance Greater than 79-45 in 45-31 in 31-18 in Less than (in/cm) 79 in (200 cm) (200-115 cm) (115-80 cm) (80-45 cm) 12 in (30 cm) Audible Alert None Single 1/2 Slow Fast Continuous...
Page 195: Service The Parksense® Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Information Center (EVIC)” in “Understanding Your Instru- Service The ParkSense® Rear Park Assist System ment Panel” for further information. When the shift lever is During vehicle start up, when the ParkSense® Rear Park moved to REVERSE and the system is disabled, the EVIC Assist System has detected a faulted condition, the will display the “PARKSENSE OFF”...
Page 196: Cleaning The Parksense® System
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Jackhammers, large trucks, and other vibrations could the rear fascia/bumper is clean and clear of snow, ice, mud, dirt or other obstruction, and then cycle the igni- affect the performance of ParkSense® . tion.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 obstacle behind the fascia/bumper, or it could provide CAUTION! a false indication that an obstacle is behind the fascia/ • ParkSense® is only a parking aid and it is unable to bumper. recognize every obstacle, including small obstacles. •...
Page 198: Parksense® Front And Rear Park Assist - If Equipped
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • Before using ParkSense®, it is strongly recom- • Drivers must be careful when backing up even mended that the ball mount and hitch ball assem- when using ParkSense®. Always check carefully bly is disconnected from the vehicle when the behind your vehicle, look behind you, and be sure vehicle is not used for towing.
Page 199: Parksense® Sensors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 up or moving forward, e.g. during a parking maneuver. ParkSense® Sensors Refer to ParkSense® System Usage Precautions for limi- The four ParkSense® sensors, located in the rear fascia/ tations of this system and recommendations. bumper, monitor the area behind the vehicle that is within the sensors’...
Page 200: Parksense® Warning Display
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® Warning Display ParkSense® Display The ParkSense® Warning screen will only be displayed if The warning display will turn ON indicating the system Sound and Display is selected from the Customer - status when the vehicle is in REVERSE or when the Programmable Features section of the Electronic Vehicle vehicle is in DRIVE and an obstacle has been detected.
Page 201 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 WARNING ALERTS Rear Distance Greater than 79 79-45 in 45-31 in 31-18 in Less than 18 in (in/cm) in (200 cm) (200-115 cm) (115-80 cm) (80-45 cm) (45 cm) Front Distance Greater than 47 47-39 in 39-25 in 25-12 in...
Page 202: Enabling And Disabling Front And/Or Rear Parksense
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjustable Chime Volume Settings Rear ParkSense® can be enabled and disabled with the Rear ParkSense® switch. Front and Rear chime volume settings can be selected from the EVIC or Uconnect® System — if equipped. When the Front or Rear ParkSense®...
Page 203: Service The Parksense® Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 NOTE: Arc alerts from the enabled ParkSense® system, FRONT SENSORS , or the PARKSENSE UNAVAIL- will interrupt the five second messages, and the EVIC ABLE SERVICE REQUIRED message for five seconds. will display the car graphic with the corresponding arcs When the shift lever is moved to Reverse and the system and OFF message.
Page 204: Cleaning The Parksense® System
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Information Center (EVIC)” in “Understanding Your ParkSense® System Usage Precautions Instrument Panel” for further information. NOTE: If PARKSENSE UNAVAILABLE WIPE REAR SENSORS • Ensure that the front and rear bumper are free of snow, or PARKSENSE UNAVAILABLE WIPE FRONT SEN- ice, mud, dirt and debris to keep the ParkSense®...
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 PARKSENSE OFF or REAR PARKSENSE OFF mes- system misinterpreting a close obstacle as a sensor sage for five seconds, followed by a car graphic with problem, causing the “PARKSENSE UNAVAILABLE OFF in the corresponding side. This car graphic will SERVICE REQUIRED”...
Page 206: Parkview® Rear Back Up Camera - If Equipped
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) WARNING! (Continued) • The vehicle must be driven slowly when using • Before using ParkSense®, it is strongly recom- ParkSense® in order to be able to stop in time mended that the ball mount and hitch ball assem- when an obstacle is detected.
Page 207 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 lever is put into REVERSE. The image will be displayed When enabled, active guide lines are overlaid on the image to illustrate the width of the vehicle and its projected in the rearview mirror display — if equipped or backup path based on the steering wheel position.
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • To avoid vehicle damage, ParkView® should only Drivers must be careful when backing up even when using the ParkView® Rear Back Up Camera. Always be used as a parking aid. The ParkView® camera is check carefully behind your vehicle, and be sure to unable to view every obstacle or object in your check for pedestrians, animals, other vehicles, ob-...
Page 209: Turning Parkview® On Or Off - With Uconnect® 5.0
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Turning ParkView® On Or Off — Turning ParkView® On Or Off — With Uconnect® With Uconnect® 5.0 8.4A/8.4AN 1. Turn the Radio on. 1. Press the “Controls” soft-key located on the bottom of the Uconnect®...
Page 210: Overhead Console - If Equipped
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED The overhead console is located on the headliner above the review mirror. The overhead console contains the following features: • Courtesy/Reading Lights • Power Sunroof Switch — If Equipped •...
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
Page 212: Garage Door Opener - If Equipped
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The HomeLink® unit is powered by your vehicles 12 Volt battery.
Page 213: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Before You Begin Programming HomeLink® NOTE: • Erasing all channels should only be performed when Ensure your vehicle is parked outside of the garage before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 214 212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program. 3. Simultaneously press and hold both the Homelink® button you want to program and the hand - held transmitter button.
Page 215: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 attached to the garage door opener/device motor. Reprogramming A Single HomeLink® Button Firmly press and release the “LEARN” or “TRAIN- To reprogram a channel that has been previously trained, ING” button. On some garage door openers/devices follow these steps: there may be a light that blinks when the garage door 1.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Simultaneously press and hold both the Homelink® To program the remaining two HomeLink® buttons, button you want to program and the hand - held repeat each step for each remaining button. DO NOT transmitter button.
Page 217: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Canadian/Gate Operator Programming 3. Simultaneously press and hold both the Homelink® button while you press and release (“cycle”), your For programming transmitters in Canada/United States hand - held transmitter every two seconds. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 218: Using Homelink
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you unplugged the garage door opener/device for programmed device (i.e., garage door opener, gate opera- programming, plug it back in at this time. tor, security system, entry door lock, home/office light- ing, etc.,). The hand-held transmitter of the device may Reprogramming A Single HomeLink®...
Page 219: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 Troubleshooting Tips WARNING! If you are having trouble programming HomeLink®, Vehicle exhaust contains carbon monoxide, a danger- here are some of the most common solutions: ous gas. Do not run your vehicle in the garage while •...
Page 220: General Information
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with use a garage door opener without these safety fea- FCC and IC rules. Changes or modifications not ex- tures. Call toll-free 1–800–355–3515 or, on the Internet pressly approved by the party responsible for compli- at www.HomeLink.com for safety information or ance could void the user’s authority to operate the...
Page 221: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located on the overhead • Never leave children unattended in a vehicle, and console between the courtesy/reading lights. do not leave the key fob in or near the vehicle, or in a location accessible to children.
Page 222: Opening Sunroof - Manual Mode
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express WARNING! (Continued) Press the switch rearward and release it within one-half • Do not allow small children to operate the sunroof. second and the sunroof will open automatically from any Never allow your fingers, other body parts, or any position.
Page 223: Pinch Protect Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 Pinch Protect Feature Sunshade Operation This feature will detect an obstruction in the opening of The sunshade can be opened manually. However, the the sunroof during Express Close operation. If an ob- sunshade will open automatically as the sunroof opens. struction in the path of the sunroof is detected, the NOTE: The sunshade cannot be closed if the sunroof is sunroof will automatically retract.
Page 224: Sunroof Maintenance
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunroof Maintenance ELECTRICAL POWER OUTLETS Use only a nonabrasive cleaner and a soft cloth to clean The auxiliary 12 Volt (13 Amp) power outlets can provide the glass panel. power for in-cab accessories designed for use with the standard “cigar lighter”...
Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 • Lower left and lower right of the center stack when The auxiliary power outlets can be found in the following locations: equipped with a bench seat. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts.
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Center console when equipped with bucket seats. • Inside the upper lid of the center storage compartment — if equipped. Power Outlet — Center Console Power Outlet — Upper Lid...
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 • Rear of the center console storage compartment — The key symbol indicates that this outlet can supply Quad Cab® or Crew Cab. power when the key is in the ON/RUN or ACC posi- tions.
Page 228 226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of outlet power from the vehicle’s battery, even when not in should be inserted into any 12 Volt outlet.
Page 229: Cigar Lighter And Ash Receiver - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED A removable ash receiver and cigar lighter are available. For vehicles with a bench seat the cupholder tray can be used to hold the ash receiver. Optional Floor Shifter 1 —...
Page 230: Power Inverter - If Equipped
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watts Maximum) outlet is located on the center stack of the instrument panel, to the right of the radio. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts.
Page 231: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 Front Instrument Panel Cupholders — Floor WARNING! Mounted Shifter To avoid serious injury or death: For vehicles equipped with bucket seats there are two • Do not insert any objects into the receptacles. cupholders located in the floor console.
Page 232: Rear Cupholder - Crew Cab
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholder — Quad Cab® Rear Cupholder — Crew Cab Quad Cab® vehicles may be equipped with a rear Crew Cab vehicles are equipped with rear cupholders cupholder that consists of two cup wells for rear passen- located in the center armrest.
Page 233: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 Rear Cup Wells Glove Compartment STORAGE 1 — Upper Glove Compartment 2 — Lower Glove Compartment Glove Compartment The glove compartment is located on the passenger side of the instrument panel and features both an upper and lower storage area.
Page 234 232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper glove compartment push upward on To open the lower glove compartment, pull on the handle the handle release. The glove compartment door will to release the latch and lower the glove compartment automatically open.
Page 235: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Door Storage Rear Door Storage — Crew Cab Storage compartments are located in both the driver and Front Door Storage — If Equipped passenger door trim panels. Storage areas and bottle holders (drivers side only) are located in the door trim panels.
Page 236: Center Storage Compartment - If Equipped
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Storage Compartment — If Equipped WARNING! The center storage compartment is located between the • This armrest is not a seat. Anyone seated on the driver and passenger seats. The storage compartment armrest could be seriously injured during vehicle provides an armrest and contains both and upper and operation, or a collision.
Page 237 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 Upper Storage Compartment Lower Storage Bin With the upper lid closed, pull on the lower handle to open the lower storage bin.
Page 238: Second Row In-Floor Storage Bin - If Equipped
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury.
Page 239: Seatback Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 NOTE: The front seat may have to be moved forward to Seatback Storage fully open the lid. Located in the back of both the driver and passenger front seats are pockets that can be used for storage. Opened Storage Bin Drivers Side Seatback Storage...
Page 240: Storage (Regular Cab)
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Storage (Regular Cab) Storage and Seats (Crew Cab) The storage bin is located behind the front seats and runs The Crew Cab models provide additional storage under the length of the cab. the rear seats. Lift the seats to access the storage com- partment.
Page 241: Plastic Grocery Bag Retainers (Regular Cab Models)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 CAUTION! Always lift the storage compartment lids by using the handle. Failure to lift the lids by using the handle can result in damage to the lids. Plastic Grocery Bag Retainers (Regular Cab Models) Retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab, behind...
Page 242: Rear Window Features
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to the heating elements: The rear window defroster button is located on • Use care when washing the inside of the rear the climate control panel.
Page 243: Power Sliding Rear Window - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Power Sliding Rear Window — If Equipped Manual Sliding Rear Window — If Equipped The switch for the power sliding rear window is located A locking device in the center of the window helps to on the overhead console.
Page 244 242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Unfolding the Load Floor 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor In Open Position 3. Reverse the procedure to store the load floor. Unfolding The Load Floor 2. Grasp the knob on the load floor and lift the knob until the load floor unfolds into position.
Page 245 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 Positioning the Load Floor for Storage Access Under the Seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap located at either side of the load floor. 3.
Page 246: Pickup Box
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PICKUP BOX NOTE: If you are installing a Toolbox, Ladder Rack or Headache Rack at the front of the Pickup Box, you must The pickup box has many features designed for utility use Mopar Box Reinforcement Brackets that are available and convenience.
Page 247: Cargo Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 There are stampings in the sheet metal on the inner side WARNING! (Continued) bulkheads of the box in front of and behind both wheel • Care should always be exercised when operating a housings.
Page 248: Turning Cargo Camera On Or Off - With Uconnect® 8.4A/8.4An
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If the vehicle speed remains below 8 mph (13 km/h), the cargo camera image will be displayed continuously until deactivated touching Uconnect® display. The Cargo Camera is located in the bottom center area of the center high-mounted stoplamp (CHMSL).
Page 249: Rambox® - If Equipped
The cargo storage bins provide watertight, lockable, RamBox® Cargo Storage Bins illuminated storage for up to 150 lbs (68 kg) for 1500 series vehicles or 300 lbs (136 kg) for 2500 and 3500 series vehicles of evenly distributed cargo.
Page 250 • Do not exceed cargo weight rating of 150 lb (68 kg) 1500 series vehicles or 300 lbs (136 kg) for 2500 and 3500 series vehicles per bin. To open a storage bin with the RamBox® unlocked, press and release the button located on the lid.
Page 251: Locking And Unlocking Rambox
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 CAUTION! (Continued) it is recommended that the bin lights be turned off manually using the on/off switch. Cargo bins feature two removable drain plugs (to allow water to drain from bins). To remove plug, pull up on the edge.
Page 252: Rambox® Safety Warning
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the storage bin, insert the key into the keyhole on the RamBox® Safety Warning pushbutton and turn clockwise to lock or counterclock- Carefully follow these warnings to help prevent personal wise to unlock. Always return the key to the upright injury or damage to your vehicle: (vertical) position before removing the key from the pushbutton.
Page 253: Bed Extender - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 RamBox® Storage Bin Cover Emergency Release NOTE: In the event of an individual being locked inside Lever — If Equipped the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark lever As a security measure, a Storage Bin Cover Emergency attached to the storage bin cover latching mechanism.
Page 254 252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the bed extender into the storage position, perform the following: 1. Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the extender side gates. Center Handle And Lock 1 —...
Page 255 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Storage Position Cargo Tie Down Loop 3. Rotate the side gates closed allowing the outboard ends to be positioned in front of the cargo tie down loops.
Page 256 254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Rotate the center handle horizontally to secure the side Divider Position gates in the closed position. The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed.
Page 257 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 Center Handle And Lock Aligning Gate To Slots 3. Rotate the side gates closed so that the outboard ends 1 — Center Handle Lock are secured into the intended slots of the bed. 2 —...
Page 258 256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Extender Position The extender position allows you to load the bed of the truck beyond the tail gate. The bed extender will add an additional 15 in (38 cm) in the back of the truck when additional cargo room is needed.
Page 259 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 To install the bed extender into the extender position perform the following: 1. Lower the tailgate. 2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the ex- tender side gates.
Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To reduce the risk of potential injury or property damage: • Cargo must be secured. • Do not exceed cargo load rating of your vehicle. • Secure all loads to truck utilizing cargo tie downs. •...
Page 261: Bed Rail Tie-Down System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 Bed Rail Tie-Down System CAUTION! The maximum load per cleat should not exceed 250 lbs (113 kg) and the angle of the load on each cleat should not exceed 45 degrees above horizontal, or damage to the cleat or cleat rail may occur.
Page 262 260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE out on the cleat and slide it to the detent nearest the To remove the cleats from the utility rail, remove the end desired location. Make sure the cleat is seated in the cap screw located in the center of the end cap, using a detent and tighten the nut.
Page 263: Slide-In Campers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 SLIDE-IN CAMPERS EASY-OFF TAILGATE To simplify mounting of a camper unit with an overhang, Camper Applications the tailgate can be removed. Certain truck models are not recommended for slide-in campers. To determine if your vehicle is excluded, please NOTE: If your vehicle is equipped with a rear camera or refer to the “Consumer Information Truck-Camper Load- RKE the electrical connector must be disconnected prior...
Page 264: Disconnecting The Rear Camera Or Remote Keyless Entry - If Equipped
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Disconnecting the Rear Camera or Remote Keyless Entry — If Equipped 1. Open the tailgate to access the rear camera or RKE connector bracket located on the rear sill. Locking Tab 3. Disconnect the chassis wiring harness, ensuring the connector bracket does not fall into the sill.
Page 265: Removing The Tailgate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 5. Connect the tailgate plug (provided in the glove box) to the tailgate wiring harness to ensure that the terminals do not corrode. 6. Tape the tailgate harness and bracket against the forward-facing surface of the tailgate. This will pre- vent damaging the connector and bracket when stor- ing or reinstalling the tailgate.
Page 266: Locking Tailgate
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Remove the tailgate from the vehicle. TRI-FOLD TONNEAU COVER-IF EQUIPPED Your vehicle may be equipped with a Tri-Fold Tonneau NOTE: Do not carry the tailgate loose in the truck Cover which consists of different features: pickup box.
Page 267: Tri-Fold Tonneau Cover Removal
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Tri-Fold Tonneau Cover Removal To remove the Tonneau Cover follow the following steps: 1. Lower the tailgate to gain access to the first set of two tonneau cover clamps located on the driver and pas- sengers bottom side of the tonneau cover.
Page 268 266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Pull down on the first set of clamps on both driver and 3. Pull down on the clamp wire and push the clamp up passenger sides to the semi clamped position. into the proper released position. Semi Clamped Position Proper Released Position NOTE: Be sure the clamp and clamp wire is in the...
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 4. Pick up on the tonneau cover and fold it back into the second panel. 5. Pick up on the cover and fold it back into the third panel. 6. Once in the third panel position pull down on the second set of clamps on both driver and passenger sides to the semi clamped position.
Page 270 268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Semi Clamped Position Proper Released Position 7. Pull down on the clamp wire and push the clamp up 8. Be sure to clip both stowage straps together to insure into the proper released position. the cover stays together.
Page 271: Tri-Fold Tonneau Cover Installation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 Tri-Fold Tonneau Cover Installation To install the Tonneau Cover follow the following steps: 1. Position the folded Tonneau Cover on the truck bed and push the Cover forward against the front of the truck bed.
Page 272: Tri-Fold Tonneau Cover Cleaning
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Tonneau Cover clamps can be locked when in the Tri-Fold Tonneau Cover Cleaning clamped position by placing a lock through the locking For proper cleaning of the Tonneau Cover use MOPAR® hole. Whitewall &...
Page 273: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ EVIC Red Telltales .....298 INSTRUMENT PANEL FEATURES ..273 ▫...
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Soft-Keys ......318 ▫ Manual Climate Controls With Touchscreen — If Equipped .
Page 275: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 273 INSTRUMENT PANEL FEATURES 1 — Headlight Switch 7 — 115v Power Inverter Outlet 13 — Gear Selector/Transfer Case Position Switch — If Equipped 2 — Instrument Cluster 8 — Power Outlet 14 — Ignition Switch 3 —...
Page 276: Instrument Cluster - Midline
274 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — MIDLINE...
Page 277: Instrument Cluster - Premium
UNDERSTANDING YOUR INSTRUMENT PANEL 275 INSTRUMENT CLUSTER — PREMIUM...
Page 278: Instrument Cluster Descriptions
276 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS If the ABS light remains on or turns on while driving, it indicates that the anti-lock portion of the brake system is 1. Tachometer not functioning and that service is required. However, The tachometer indicates engine speed in Revolutions the conventional brake system will continue to operate Per Minute (RPM x 1000).
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 testing the light will come on when the ignition is first CAUTION! turned on and remain on for 15 seconds, then blink for 5 seconds, and remain on until the vehicle is started. If the Prolonged driving with the Malfunction Indicator bulb does not come on during starting, have the condi- Light (MIL) on could cause damage to the engine...
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Turn Signal Indicators the pointer moves to either extreme left or right and remains there during normal driving, the electrical sys- The arrow will flash with the exterior turn tem should be serviced. signal when the turn signal lever is operated. NOTE: The voltmeter may show a gauge fluctuation at various engine temperatures.
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 If the light remains on when the parking brake has been NOTE: The light may flash momentarily during sharp disengaged, and the fluid level is at the full mark on the cornering maneuvers, which change fluid level condi- master cylinder reservoir, it indicates a possible brake tions.
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the Brake Warning Light can be checked by headlights or park lights are left on, the high beam turning the ignition switch from the OFF position to the indicator light will remain illuminated and a chime will ON/RUN position.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 driving, have the system inspected at an authorized 13. Cargo Light — If Equipped dealer as soon as possible. Refer to “Occupant Restraints” The cargo light will illuminate when the cargo in “Things To Know Before Starting Your Vehicle” for light is activated by pressing the cargo light further information.
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL 16. Tire Pressure Monitoring Telltale Light — If overheat and can lead to tire failure. Under-inflation also Equipped reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Each tire, including the spare (if provided), Please note that the TPMS is not a substitute for proper should be checked monthly when cold and tire maintenance, and it is the driver’s responsibility to...
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 of reasons, including the installation of replacement or CAUTION! (Continued) alternate tires or wheels on the vehicle that prevent the balance beads if your vehicle is equipped with a TPMS from functioning properly. Always check the TPMS, as damage to the sensors may result.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL 19. Shift Lever Indicator 21. Electronic Stability Control (ESC) OFF Indicator Light — If Equipped The Shift Lever Indicator is self-contained within the instrument cluster. It displays the gear position of the This light indicates the Electronic Stability Con- automatic transmission.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 running, a malfunction has been detected in the ESC 24. Temperature Gauge system. If this light remains on after several ignition The temperature gauge shows engine coolant tempera- cycles, and the vehicle has been driven several miles ture.
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Electric Power Steering Malfunction Warning Light WARNING! This telltale is on when the Electric Power A hot engine cooling system is dangerous. You or Steering is not operating and needs service. others could be badly burned by steam or boiling coolant.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 If the light remains lit with the engine running, your 30. Air Suspension Off-Road 2 Indicator Lamp – If vehicle will usually be drivable. However, see an autho- Equipped rized dealer for service as soon as possible. If the light is This light will illuminate when the air suspension system flashing when the engine is running, immediate service is is set to the Off-Road 2 setting.
Page 290: Electronic Vehicle Information Center (Evic)
288 UNDERSTANDING YOUR INSTRUMENT PANEL 32. 4WD AUTO Indicator Light — If Equipped ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) This light alerts the driver that the vehicle is in the four-wheel drive auto mode, and the front axle is engaged, but the vehicle’s power is sent to the rear wheels.
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 • Vehicle Settings (Not Equipped with a Uconnect® 5.0 This system allows the driver to select a variety of useful information by pressing the switches mounted on the & 8.4 radio) steering wheel. The EVIC consists of the following: The system allows the driver to select information by •...
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL • UP Arrow Button • SELECT/RIGHT Arrow Button Press and release the UP arrow button to scroll Press and release the SELECT/RIGHT arrow upward through the main menu and sub- button to access/select the information screens menus (Fuel Economy, Trip A, Trip B, Audio, or sub-menu screens of a main menu item.
Page 293: Electronic Vehicle Information Center (Evic) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 291 Electronic Vehicle Information Center (EVIC) 1. Main Screen — The inner ring of the display will Displays illuminate in grey under normal conditions, yellow for non critical warnings, red for critical warnings and white for on demand information. 2.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Selectable Gauge 2 EVIC’s compass/outside temp line. Examples of this mes- sage type are “Right Front Turn Signal Lamp Out” and 10. Selectable Gauge 1 “Low Tire Pressure”. The main display area will normally display the main •...
Page 295: Engine Oil Change Indicator System
UNDERSTANDING YOUR INSTRUMENT PANEL 293 • Five Second Unstored Messages position or cycle the ignition to the ON/RUN position if equipped with Keyless Enter-N-Go™. To turn off the When the appropriate conditions occur, this type of mes- message temporarily, press and release the MENU but- sage takes control of the main display area for five seconds ton.
Page 296: Electronic Vehicle Information Center (Evic) Messages
294 UNDERSTANDING YOUR INSTRUMENT PANEL • Traction Control Off Vehicles Not Equipped With Keyless Enter-N-Go™ • Washer Fluid Low 1. Turn the ignition switch to the ON/RUN position (Do not start the engine.) • Oil Pressure Low 2. Fully depress the accelerator pedal, slowly, three times •...
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 • Service Tire Pressure System • Key in Ignition Lights On • Parking Brake Engaged • Remote Start Active Key to Run • Brake Fluid Low • Remote Start Active Push Start Button • Service Electronic Braking System •...
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL • Passenger Seatbelt Unbuckled • Service Transmission • Front Seatbelts Unbuckled • Service Shifter • Door Open • Engage Park Brake to Prevent Rolling • Doors Open • Transmission Too cold Idle with Engine On •...
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 • Reduce Speed To Maintain Selected Ride Height • Stop/Start Not Ready 4WD/Low Range Selected – If Equipped • Air Suspension System Cooling Down Please Wait • Stop/Start Not Ready Fuel Level Low – If Equipped •...
Page 300: Evic Red Telltales
298 UNDERSTANDING YOUR INSTRUMENT PANEL • Stop/Start Not Ready Not Ready Max Cooling Or • Stop/Start Unavailable Service Stop/Start System – If Heating – If Equipped Equipped • Stop/Start Not Ready Max Cooling Or Heating Se- • Stop/Start To Restart Shift Out Of Park – If Equipped lected –...
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Oil Pressure Warning Light electrical devices or increase engine speed (if at idle). If the charging system light remains on, it means that the This telltale indicates low engine oil pressure. If vehicle is experiencing a problem with the charging the light turns on while driving, stop the vehicle and shut system.
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle has completely stopped and the shift lever is If the light turns on while driving, safely pull over and placed in the PARK position. The light should turn off. stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- If the light remains lit with the engine running, your hicle.
Page 303: Evic Amber Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 301 • Transmission Temperature Warning Telltale EVIC Amber Telltales This area will show reconfigurable amber caution tell- This telltale indicates that the transmission tales. These telltales include: fluid temperature is running hot. This may occur with severe usage, such as trailer towing. •...
Page 304: Evic White Telltales
302 UNDERSTANDING YOUR INSTRUMENT PANEL • Service Stop/Start System Telltale — If Equipped WARNING! This telltale will turn on to indicate that the If you continue operating the vehicle when the Stop/Start is Unavailable, service Stop/Start Transmission Temperature Warning Light is illumi- system.
Page 305: Evic Green Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 303 EVIC Green Telltales Vehicle Info (Customer Information Features) • Electronic Speed Control SET Press and release the UP or DOWN arrow This telltale will illuminate green when the button until the Vehicle Info icon is highlighted electronic speed control is SET.
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (1500 & 2500 Series) Tire PSI is an information only function and cannot be reset. Press and release the LEFT arrow button to return Press and release the UP or DOWN arrow button until to the main menu.
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 Trip A Trip B Press and release the UP or DOWN arrow Press and release Up & Down arrow button button until the Trip A icon is highlighted in until the Trip B icon is highlighted in the EVIC. the EVIC.
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL Stop/Start – If Equipped Audio Press and release the UP or DOWN arrow button Press and release the UP or DOWN arrow button until the Stop/Start icon is highlighted in the until the Audio display icon is highlighted in the EVIC.
Page 309: Personal Settings (Customer-Programmable Features)
UNDERSTANDING YOUR INSTRUMENT PANEL 307 Screen Setup Press and release the SELECT/RIGHT arrow button to display one of the following choices. Press and release the UP or DOWN arrow For vehicles equipped with a 7” EVIC screen and not button until the Screen Setup display icon is equipped with a Uconnect®...
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Language Nav–Turn By Turn – If Equipped When in this display you may select one of six languages When this feature is selected, the navigation system for all display nomenclature, including the trip functions utilizes voice commands, guiding through the drive and the navigation system (if equipped).
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 been selected. Refer to “Rear Park Assist System” in check-mark is removed showing the system has been “Understanding The Features Of Your Vehicle” for sys- deactivated. When the system is deactivated, the system tem function and operating information. reverts to the standard intermittent wiper operation.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL then press and release the SELECT button until a check- a check-mark appears next to the feature showing the mark appears next to the setting, showing that the setting system has been activated or the check-mark is removed has been selected.
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 To make your selection, press and release the SELECT feature showing the system has been activated, or the button until a check-mark appears next to the feature check-mark is removed showing the system has been showing the system has been activated or the check-mark deactivated.
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL and release the SELECT button until a check-mark ap- Key Fob Linked To Memory pears next to the feature showing the system has been When this feature is selected the memory seat, mirror, activated or the check-mark is removed showing the and radio settings will return to the memory set position system has been deactivated.
Page 315 Key-Off Power Delay Aero Ride Height Mode (1500 Only) – If Equipped When this feature is selected, the power window switches, radio, hands-free system (if equipped), DVD...
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL make your selection, press and release the SELECT Wheel Alignment Mode – If Equipped button until a check-mark appears next to the feature Before performing a wheel alignment this mode must be showing the system has been activated or the check-mark enabled.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 To make your selection, press and release the SELECT check-mark appears next to the setting, showing that the button until a check-mark appears next to the feature setting has been selected. Refer to “Integrated Trailer showing the system has been activated or the check-mark Brake Module”...
Page 318: Screen Setup Driver Selectable Items
316 UNDERSTANDING YOUR INSTRUMENT PANEL • Current MPG Screen Setup Driver Selectable Items • Trip A Odometer • 000 • Trip B • 000.0 • Trailer Trip (distance only) Upper Left • Trailer Brake Gain • None Upper Right • Compass •...
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 • Average MPG • Range • Current MPG • AVG MPG • Trip A • Current MPG • Trip B • Trailer Brake Gain • Trailer Trip (distance only) Lower Right • None (default setting) •...
Page 320: Uconnect® Settings
318 UNDERSTANDING YOUR INSTRUMENT PANEL • Current MPG Climate Controls in the center of the instrument panel. Turn the control knob to scroll through menus and • Trailer Brake Gain change settings (i.e., 30, 60, 90), press the center of the Restore To Defaults (Restores All Settings To Default control knob one or more times to select or change a Settings)
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 Customer Programmable Features — Uconnect® 8.4 Arrow soft-key or the Back hard-key to return to the Settings previous menu or press the X soft-key to close out of the settings screen. Pressing the Up or Down Arrow soft-keys Press the Apps soft-key, then press the Settings soft-key on the right side of the screen will allow you to toggle up to display the menu setting screen.
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL • Display Brightness With Headlights ON language soft-key until a check-mark appears next to the language, showing that setting has been selected. Touch When in this display, you may select the brightness with the back arrow soft-key to return to the previous menu. the headlights on.
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 • Touchscreen Beep • Fuel Saver Display In Cluster When in this display, you may turn on or shut off the The “ECO” message is located in the instrument cluster sound heard when a touchscreen button (soft-key) is display, this message can be turned on or off.
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Time Hours check-mark appears next to the 12hrs or 24hrs setting, showing that setting has been selected. Touch the back When in this display, you may adjust the hours. The Sync arrow soft-key to return to the previous menu. with GPS Time soft-key must be unchecked.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 • Tilt Mirrors In Reverse disappear. The ParkView® camera is located on the rear of the vehicle above the rear License plate. To make your When this feature is selected, the outside sideview mir- selection, touch the ParkView® Backup Camera soft-key, rors will tilt downward when the ignition is in the RUN until a check-mark appears next to the setting, indicating position and the transmission shift lever is in the RE-...
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL camera display whenever the shift lever is put into Backup Camera Fixed Guidelines soft-key, until a check- mark appears next to the setting, indicating that the setting REVERSE. The image will be displayed on the radio had been selected.
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 • ParkSense® Front Park Assist Chime Volume • Rain Sensing Auto Wipers Front Park Assist chime volume settings can be selected When this feature is selected, the system will automati- from the EVIC or Uconnect® System (if equipped). The cally activate the windshield wipers if it senses moisture chime volume settings include LOW, MEDIUM, and on the windshield.
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL • Four Corner Air Suspension Modes — If Equipped when exiting the vehicle. To make your selection, scroll up or down until the preferred setting is highlighted, There are four air suspension modes designed to protect then press and release the SELECT button until a check- the system in unique situations.
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 • Daytime Running Lights — If Equipped turned off if they were turned on by this feature. To make your selection, touch the Headlights With Wipers soft- When this feature is selected, the headlights will turn on key, until a check-mark appears next to setting, showing whenever the engine is running.
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL Doors & Locks make your selection, touch the Auto Unlock On Exit soft- key, until a check-mark appears next to setting, showing After pressing the Doors & Locks soft-key the following that setting has been selected. Touch the back arrow soft- settings will be available: key to return to the previous menu.
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 • Sound Horn With Lock Keyless Entry (RKE) transmitter UNLOCK button. When 1st Press Of Key Fob Unlocks is selected, you must press When this feature is selected, the horn will sound when the RKE transmitter UNLOCK button twice to unlock the the door locks are activated.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL • Passive Entry NOTE: The seat will return to the memorized seat location (if Recall Memory with Remote Key Unlock is set This feature allows you to lock and unlock the vehicles to ON) when the Remote Keyless Entry (RKE) transmitter door(s) without having to press the Remote Keyless is used to unlock the door.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 • Auto-On Driver Heated/Ventilated Seat & Steering To make your selection, touch the Easy Exit Seats soft- Wheel With Vehicle Start — If Equipped key, until a check-mark appears next to setting, showing that setting has been selected. Touch the back arrow When this feature is selected the driver’s heated seat and soft-key to return to the previous menu.
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL • Headlight Off Delay NOTE: Keep magnetic materials, such as iPod’s, Mobile Phones, Laptops and Radar Detectors, away from the top When this feature is selected, the driver can choose to of the instrument panel where the compass module is have the headlights remain on for 0, 30, 60, or 90 seconds located.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 • Perform Compass Calibration • Equalizer Touch the Calibration soft-key to change this setting. This When in this display you may adjust the Bass, Mid and compass is self-calibrating, which eliminates the need to Treble settings. Adjust the settings with the + and – manually reset the compass.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL • Surround Sound — If Equipped Trailer Brake • Trailer Select This feature provides simulated surround sound mode. To make your selection, touch the Surround Sound When this feature is selected, the Trailer Type can be soft-key, select On or Off followed by pressing the arrow selected between “Trailer 1”, “Trailer 2”, “Trailer 3”...
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 • Trailer Name Air Suspension — If Equipped After pressing the Suspension soft-key the following When this feature is selected, the Trailer name can be settings will be available. selected from 16 names. To make your selection, scroll up or down until the preferred setting is highlighted, then •...
Page 338 Touch the box next to your selection and a check-mark appears next to • Automatic Aero Mode (1500 Model Only) the feature showing the system has been activated or the When this feature is selected the Ride Height will auto- check-mark is removed showing the system has been matically be adjusted depending on the vehicle speed.
Page 339: Uconnect® Radios - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 337 • Channel Skip Touch the Subscription Info soft-key to access the Sub- scription Information screen. SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to Write down the SIRIUS ID numbers for your receiver.
Page 340: Ipod®/Usb/Mp3 Control - If Equipped
338 UNDERSTANDING YOUR INSTRUMENT PANEL iPod®/USB/MP3 CONTROL — IF EQUIPPED Located inside the center console upper lid, this feature allows an iPod® or external USB device to be plugged into the USB port. iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone®...
Page 341: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 339 The button located in the center of the right hand control CD Player will switch modes to Radio, CD or other valid audio Pressing the top of the switch once will go to the next sources.
Page 342: Radio Operation And Mobile Phones
340 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Do not apply paper or tape to the disc; avoid scratch- RADIO OPERATION AND MOBILE PHONES ing the disc. Under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from 4.
Page 343: Manual Climate Controls Without Touchscreen
UNDERSTANDING YOUR INSTRUMENT PANEL 341 Manual Climate Controls Without Touchscreen — If Equipped The controls for the manual heating and air conditioning system in this vehicle consist of a series of outer rotary dials and inner push knobs. These comfort controls can be set to obtain desired interior conditions.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL Front Blower Control Temperature Control There are four blower speeds. Use this Use this control to regulate the tem- control to regulate the amount of air perature of the air inside the passenger forced through the system in any compartment.
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 MAX A/C Mode Control (Air Direction) For maximum cooling, when MAX A/C is selected the A/C is turned on automatically and the air is Mode control allows you to choose recirculated. from several patterns of air distribu- tion.
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode Mix Mode Air is directed through the panel and floor outlets. Air is directed through the floor, defrost and side window demist outlets. This setting works best in NOTE: There is a difference in temperature (in cold or snowy conditions that require extra heat at the any conditions other than full cold or full hot), between windshield.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 • In cold or damp weather, the use of the Recirculation Recirculation Control mode will cause windows to fog on the inside because of moisture buildup inside the vehicle. For maximum Press this button to choose between outside air defogging, select the outside air position.
Page 348: Manual Climate Controls With Touchscreen
346 UNDERSTANDING YOUR INSTRUMENT PANEL Economy Mode Manual Climate Controls With Touchscreen — If Equipped If ECONOMY mode is desired, press the A/C button to turn off the LED indicator and the A/C compressor. Hard-Keys Rotate the temperature control knob to the desired tem- The hard-keys are located below the radio touchscreen.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 Soft-Keys Button Descriptions (Applies To Both Hard-Keys And Soft-Keys) Soft-keys are accessible on the radio touchscreen. 1. MAX A/C Button Press and release to toggle between MAX A/C and the prior settings. The soft-key illuminates when MAX A/C is ON.
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Recirculation Button equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster Press and release to change the current setting; the automatically turns off after 10 minutes. indicator illuminates when ON. 4.
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 6. Modes NOTE: BI-LEVEL mode is designed under comfort con- ditions to provide cooler air out of the panel outlets and The airflow distribution mode can be adjusted so air warmer air from the floor outlets. comes from the instrument panel outlets, floor outlets, •...
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Blower Control 8. Climate Control OFF Button Blower control is used to regulate the amount of air Press and release this button to turn the Climate Control forced through the climate system. There are seven ON/OFF.
Page 353: Automatic Climate Controls With Touchscreen - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 351 pressing the RECIRCULATION control button. Recircu- Automatic Climate Controls With Touchscreen — lation mode should only be used temporarily. The recir- If Equipped culation LED will illuminate on the blower control knob Hard-Keys when this button is selected. Push the button a second The hard-keys are located below the Uconnect®...
Page 354 352 UNDERSTANDING YOUR INSTRUMENT PANEL Soft-Keys Soft-keys are accessible on the Uconnect® system screen. Uconnect® 8.4 Automatic Temperature Controls — Soft-Keys Button Descriptions (Applies To Both Hard-Keys And Uconnect® 5.0 Automatic Temperature Controls — Soft-Keys) Soft-Keys 1. MAX A/C Button Press and release to change the current setting, the indicator illuminates when MAX A/C is ON.
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 this function again will cause the MAX A/C operation to 5. Front Defrost Button switch into manual mode and the MAX A/C indicator Press and release to change the current airflow setting to will turn off. Defrost mode.
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Passenger Temperature Control Up Button CAUTION! Provides the passenger with independent temperature Failure to follow these cautions can cause damage to control. Push the hard-key button for warmer tempera- the heating elements: ture settings or on the touchscreen, press and slide the •...
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 9. SYNC Soft-Key Use the small blower icon to reduce the blower setting Press the Sync soft-key to toggle the Sync feature On/Off. and the large blower icon to increase the blower setting. The Sync indicator is illuminated when this feature is enabled.
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL • Bi-Level Mode 12. Climate Control OFF Button Air comes from the instrument panel outlets and Press and release this button to turn the Climate Control floor outlets. A slight amount of air is directed ON/OFF.
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 NOTE: In Sync mode, this button will also automatically 3. When the system is set up for your comfort level, it is adjust the passenger temperature setting at the same not necessary to change the settings. You will experi- time.
Page 360: Summer Operation
358 UNDERSTANDING YOUR INSTRUMENT PANEL Recirculation Control mode to improve window clearing operation. Recircula- tion will be disabled automatically if this mode is se- lected. Attempting to use Recirculation while in this When outside air contains smoke, odors, or mode will cause the LED in the control button to blink high humidity, or if rapid cooling is desired, and then turn off.
Page 361: Vacation/Storage
UNDERSTANDING YOUR INSTRUMENT PANEL 359 coolant selection. Use of the air Recirculation mode NOTE: Automatic Temperature Controls (ATC) will au- during Winter months is not recommended because it tomatically adjust the climate control settings to reduce may cause window fogging. or eliminate window fogging on the front windshield.
Page 362: Operating Tips Chart
360 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Chart...
Page 363 STARTING AND OPERATING CONTENTS ▫ Automatic Mode ..... .372 STARTING PROCEDURES ....368 ▫...
Page 364 ▫ Description ......436 1500 Models Only (If Equipped) ...390 ▫...
Page 365 STARTING AND OPERATING 363 ▫ Electronic Vehicle Information Center (EVIC) ▫ Driving Through Water ....460 Display Messages .....446 ▫...
Page 366 ▫ Brake Assist System (BAS) — If Equipped ..504 POWER STEERING — 1500 MODELS ..494 ▫ Hill Start Assist (HSA) — If Equipped ..505 POWER STEERING —...
Page 367 STARTING AND OPERATING 365 ▫ Tire Spinning ......533 TIRE SAFETY INFORMATION ... . .514 ▫...
Page 368 366 STARTING AND OPERATING ▫ Tire Pressure Information System (TPIS) 3500 FLEXIBLE FUEL (3.6L ENGINE ONLY) — Series Trucks ......549 IF EQUIPPED .
Page 369 ▫ Certification Label ....562 ▫ 1500 Models Only .....585 ▫...
Page 370: Starting Procedures
368 STARTING AND OPERATING STARTING PROCEDURES Normal Starting Before starting your vehicle, adjust your seat, adjust both Normal starting of either a warm or cold engine is inside and outside mirrors, and fasten your seat belt. obtained without pumping or pressing the accelerator pedal.
Page 371: Keyless Enter-N-Go
STARTING AND OPERATING 369 Tip Start Feature 2. Press and hold the brake pedal while pressing the ENGINE START/STOP button once. Do not press the accelerator. Turn the ignition switch briefly to the START position and release it. The starter 3.
Page 372 370 STARTING AND OPERATING 3. If the shift lever/shift selector is not in PARK, the ENGINE START/STOP Button Functions — With ENGINE START/STOP button must be held for two Driver’s Foot OFF The Brake Pedal (In PARK Or seconds or three short presses in a row with the NEUTRAL Position) vehicle speed above 5 mph (8 km/h) before the engine The ENGINE START/STOP button operates similar to an...
Page 373: Extreme Cold Weather
STARTING AND OPERATING 371 4. Press the ENGINE START/STOP button a third time CAUTION! to return the ignition to the OFF position (EVIC displays “OFF”). To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to Extreme Cold Weather (Below –20°F Or −29°C) 15 seconds before trying again.
Page 374: After Starting
372 STARTING AND OPERATING After Starting WARNING! (Continued) The idle speed is controlled automatically and it will • If the vehicle has a discharged battery, booster decrease as the engine warms up. cables may be used to obtain a start from a booster battery or the battery in another vehicle.
Page 375: Possible Reasons The Engine Does Not Auto Stop
STARTING AND OPERATING 373 To Activate The Autostop Mode, The Following Must Possible Reasons The Engine Does Not AUTO Occur: STOP Prior to engine shut down, the system will check many 1. The system must be in STOP/START READY state. A safety and comfort conditions to see if they are fulfilled.
Page 376: To Start The Engine While In Autostop Mode
374 STARTING AND OPERATING • Engine has not reached normal operating temperature To Start The Engine While In Autostop Mode • Battery discharged While in DRIVE the engine will start when the brake pedal is released or the throttle pedal is depressed. The •...
Page 377 STARTING AND OPERATING 375 • Autostop time exceeds 5 minutes Conditions that force an automatic shift to PARK while in Autostop mode. • Battery voltage drops too low The Engine Will Not Start Automatically and the Trans- • Low brake vacuum (e.g. after several brake pedal mission will be placed in PARK if: applications) •...
Page 378: To Manually Turn Off The Stop Start System
376 STARTING AND OPERATING To Manually Turn Off The Stop Start System 2. The STOP/START OFF message will appear in Elec- tronic Vehicle Information Center (EVIC). Refer to “Elec- 1. Press the STOP/START Off switch (located on the tronic Vehicle Information Center (EVIC)” in “Under- switch bank).
Page 379: System Malfunction
STARTING AND OPERATING 377 System Malfunction 1500 Models If there is a malfunction in the STOP/START system, the The engine block heater cord is routed under the hood on system will not shut down the engine. A SERVICE the passenger side of the vehicle near the right head lamp STOP/START SYSTEM message will appear in the Elec- assembly.
Page 380: Automatic Transmission
378 STARTING AND OPERATING WARNING! CAUTION! (Continued) • Do not shift between PARK, REVERSE, NEU- Remember to disconnect the engine block heater TRAL, or DRIVE when the engine is above idle cord before driving. Damage to the 110-115 Volt speed. electrical cord could cause electrocution.
Page 381 STARTING AND OPERATING 379 WARNING! (Continued) WARNING! (Continued) Shift into or out of REVERSE only after the vehicle Unintended movement of a vehicle could injure has come to a complete stop and the engine is at idle those in or near the vehicle. As with all vehicles, you speed.
Page 382: Key Ignition Park Interlock
380 STARTING AND OPERATING before the ignition switch can be turned to the full OFF WARNING! (Continued) (key removal) position. The key fob can only be removed Never leave children alone in a vehicle, or with from the ignition when the ignition is in the full OFF access to an unlocked vehicle.
Page 383: Eight-Speed Automatic Transmission
STARTING AND OPERATING 381 In 8-speed vehicles, the brake pedal must also be pressed The electronically-controlled transmission provides a to shift from NEUTRAL into DRIVE or REVERSE when precise shift schedule. The transmission electronics are the vehicle is stopped or moving at low speeds. self-calibrating;...
Page 384 382 STARTING AND OPERATING NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. PARK (P) This range supplements the parking brake by locking the transmission.
Page 385 STARTING AND OPERATING 383 NOTE: On four-wheel drive vehicles be sure that the WARNING! (Continued) transfer case is in a drive position. • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If WARNING! your foot is not firmly pressing the brake pedal, the •...
Page 386 384 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
Page 387 STARTING AND OPERATING 385 The following indicator should be used to ensure that you WARNING! (Continued) have engaged the transmission into the PARK position: • Do not leave the key fob in or near the vehicle (or • With brake pedal released, look at the transmission in a location accessible to children), and do not gear position display and verify that it indicates the leave the ignition (of a vehicle equipped with...
Page 388 386 STARTING AND OPERATING DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 389 STARTING AND OPERATING 387 During extremely cold temperatures (-22°F [-30°C] or In the event of a momentary problem, the transmission below), transmission operation may be modified depend- can be reset to regain all forward gears by performing the ing on engine and transmission temperature as well as following steps: vehicle speed.
Page 390 388 STARTING AND OPERATING 6. Shift into the desired gear range. If the problem is no shift above third gear (except to prevent engine over- longer detected, the transmission will return to normal speed), but will shift down into second and first gears operation.
Page 391 STARTING AND OPERATING 389 WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. When to Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the TOW/HAUL switch to activate TOW/ HAUL mode.
Page 392: Six-Speed Automatic Transmission - 1500 Models Only (If Equipped)
If TOW/HAUL mode is desired, the switch must be pressed each time the engine is started. Six-Speed Automatic Transmission — 1500 Models Only (If Equipped) The transmission gear position display (located in the instrument cluster) indicates the transmission gear range.
Page 393 STARTING AND OPERATING 391 The electronically-controlled transmission provides a position will select the highest available transmission precise shift schedule. The transmission electronics are gear, and will display that gear in the instrument cluster self-calibrating; therefore, the first few shifts on a new as 1, 2, 3, etc.
Page 394 392 STARTING AND OPERATING When parking on a level surface, you may shift the WARNING! (Continued) transmission into PARK first, and then apply the parking • Your vehicle could move and injure you and others brake. if it is not completely in PARK. Check by trying to When parking on a hill, apply the parking brake before move the shift lever out of PARK with the brake shifting the transmission to PARK, otherwise the load on...
Page 395 STARTING AND OPERATING 393 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in and near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
Page 396 394 STARTING AND OPERATING WARNING! (Continued) CAUTION! (Continued) • Before moving the shift lever out of PARK, you • DO NOT race the engine when shifting from must turn the ignition switch from the OFF posi- PARK or NEUTRAL into another gear range, as this tion to the ON/RUN position, and also press the can damage the drivetrain.
Page 397 STARTING AND OPERATING 395 • With brake pedal released, verify that the shift lever WARNING! (Continued) will not move out of PARK. practices that limit your response to changing traffic REVERSE (R) or road conditions. You might lose control of the vehicle and have a collision.
Page 398 396 STARTING AND OPERATING automatically upshifts through underdrive first and sec- transmission shift schedule and expand the range of ond gears, direct third gear and overdrive fourth and torque converter clutch engagement. This is done to fifth gears. The DRIVE position provides optimum driv- prevent transmission damage due to overheating.
Page 399 STARTING AND OPERATING 397 temperature as well as vehicle speed. This feature im- illuminated. Limp Home Mode allows the vehicle to be proves warm up time of the engine and transmission to driven to an authorized dealer for service without dam- achieve maximum efficiency.
Page 400 398 STARTING AND OPERATING NOTE: Even if the transmission can be reset, we recom- when towing a trailer on certain grades. In ERS mode, mend that you visit your authorized dealer at your earliest gears 1 though 3 are underdrive gears, and ERS 4 is direct possible convenience.
Page 401 STARTING AND OPERATING 399 Column Shift Lever Console Shift Lever To exit ERS mode, simply press and hold the shift lever to the right (+) (console shift) or press the ERS (+) switch (column shift) until “D” is once again displayed in the instrument cluster.
Page 402 400 STARTING AND OPERATING WARNING! CAUTION! When using ERS for engine braking while descend- Do not downshift for additional engine braking on a ing steep grades, be careful not to overspeed the slippery surface. The drive wheels could lose their engine.
Page 403 STARTING AND OPERATING 401 When To Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the TOW/HAUL switch to activate TOW/ HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting.
Page 404 402 STARTING AND OPERATING NOTE: WARNING! • The torque converter clutch will not engage, and the Do not use the “TOW/HAUL” feature when driving transmission will not shift into the top overdrive gear, in icy or slippery conditions. The increased engine until the transmission fluid and engine coolant are braking can cause the rear wheels to slide, and the warm [usually after 1 to 3 miles (2 to 5 km) of driving].
Page 405: Six-Speed Automatic Transmission - 2500/3500
STARTING AND OPERATING 403 cause damage to the transmission. The torque con- vehicle may be somewhat abrupt. This is a normal verter will refill within five seconds after starting the condition, and precision shifts will develop within a few engine. hundred miles (kilometers).
Page 406 404 STARTING AND OPERATING Gear Ranges When parking on a hill, apply the parking brake before shifting the transmission to PARK, otherwise the load on DO NOT race the engine when shifting from PARK or the transmission locking mechanism may make it diffi- NEUTRAL into another gear range.
Page 407 STARTING AND OPERATING 405 WARNING! (Continued) WARNING! (Continued) • Your vehicle could move and injure you and others • Unintended movement of a vehicle could injure if it is not completely in PARK. Check by trying to those in and near the vehicle. As with all vehicles, move the shift lever out of PARK with the brake you should never exit a vehicle while the engine is pedal released.
Page 408 406 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Never leave children alone in a vehicle, or with • Before moving the shift lever out of PARK, you access to an unlocked vehicle. Allowing children to must turn the ignition switch from the OFF posi- be in a vehicle unattended is dangerous for a tion to the ON/RUN position, and also press the number of reasons.
Page 409 STARTING AND OPERATING 407 REVERSE (R) CAUTION! (Continued) This range is for moving the vehicle backward. Shift into • DO NOT race the engine when shifting from REVERSE only after the vehicle has come to a complete PARK or NEUTRAL into another gear range, as this stop.
Page 410 408 STARTING AND OPERATING When frequent transmission shifting occurs (such as CAUTION! when operating the vehicle under heavy loading condi- tions, in hilly terrain, traveling into strong head winds, or Towing the vehicle, coasting, or driving for any other while towing heavy trailers), use the Electronic Range reason with the transmission in NEUTRAL can cause Select (ERS) shift control (refer to “Electronic Range severe transmission damage.
Page 411 STARTING AND OPERATING 409 NOTE: Use caution when operating a heavily loaded direct gears only. Normal operation will resume once the vehicle at low speeds (such as towing a trailer up a steep transmission temperature has risen to a suitable level. grade, or in stop-and-go traffic) during hot weather.
Page 412 410 STARTING AND OPERATING 2. Shift the transmission into PARK. Electronic Range Select (ERS) Operation The Electronic Range Select (ERS) shift control allows the 3. Turn the ignition switch to the OFF position. driver to limit the highest available gear when the shift 4.
Page 413 STARTING AND OPERATING 411 WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. NOTE: To select the proper gear position for maximum deceleration (engine braking), simply press and hold the ERS (-) switch down.
Page 414 412 STARTING AND OPERATING Overdrive Operation HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due The automatic transmission includes an electronically to excessive shifting. When operating in TOW/HAUL controlled Overdrive (fifth and sixth gears). The trans- mode, transmission upshifts are delayed, and the trans- mission will automatically shift into Overdrive if the mission will automatically downshift (for engine brak-...
Page 415 STARTING AND OPERATING 413 The “TOW/HAUL Indicator Light” will illuminate in the Torque Converter Clutch instrument cluster to indicate that TOW/HAUL mode A feature designed to improve fuel economy has been has been activated. Pressing the switch a second time included in the automatic transmission on your vehicle.
Page 416: Four-Wheel Drive Operation - If Equipped
414 STARTING AND OPERATING NOTE: FOUR-WHEEL DRIVE OPERATION — IF EQUIPPED • The torque converter clutch will not engage, and the Four-wheel drive trucks are equipped with either a manu- transmission will not shift to sixth gear, until the trans- ally shifted transfer case or an electronically shifted transfer mission fluid and engine coolant are warm [usually after case.
Page 417 STARTING AND OPERATING 415 When additional traction is required, the 4H and 4L When operating your vehicle in 4L, the engine speed is positions can be used to lock the front and rear drive- approximately three times that of the 2H or 4H positions shafts together and force the front and rear wheels to at a given road speed.
Page 418 416 STARTING AND OPERATING NOTE: Delayed shifts out of four-wheel drive may be For additional information on the appropriate use of each experienced due to uneven tire wear, low or uneven tire transfer case mode position, see the information below: pressures, excessive vehicle loading, or cold tempera- tures.
Page 419 STARTING AND OPERATING 417 vehicle in motion, the transfer case will engage/ disengage faster if you momentarily release the accelera- Four-Wheel Drive Low Range - This range locks the front tor pedal after completing the shift. Apply a constant and rear driveshafts together forcing the front and rear force when shifting the transfer case lever.
Page 420: Electronically Shifted Transfer Case (Four-Position Switch) - If Equipped
418 STARTING AND OPERATING • Shifting into or out of 4L is possible with the vehicle Electronically Shifted Transfer Case completely stopped, however difficulty may occur due to (Four-Position Switch) — If Equipped the mating clutch teeth not being properly aligned. This is an electronic shift transfer case and is operated by Several attempts may be required for clutch teeth align- the 4WD Control Switch (Transfer Case Switch), which is...
Page 421 STARTING AND OPERATING 419 This electronically shifted transfer case provides four accomplished by rotating the 4WD Control Switch to the mode positions: desired position. Refer to “Shifting Procedure” in this section for specific shifting instructions. The 4WD LOCK • Two-wheel drive high range (2WD) and 4WD LOW positions are designed for loose, slippery •...
Page 422 420 STARTING AND OPERATING Transfer Case Position Indicator Lights 2. The newly selected position indicator light will con- tinue to flash. The Transfer Case Position Indicator Lights (4WD and 4LOW) are located in the instrument cluster and indicate 3. The transfer case will not shift. the current and desired transfer case selection.
Page 423 STARTING AND OPERATING 421 Proper operation of four-wheel drive vehicles depends WARNING! on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the Always engage the parking brake when powering drivetrain.
Page 424 422 STARTING AND OPERATING For additional information on the appropriate use of each NEUTRAL (N) transfer case mode position, see the information below: Neutral - This range disengages both the front and rear driveshafts from the powertrain. To be used for flat towing behind another vehicle.
Page 425 STARTING AND OPERATING 423 • If all the requirements to select a new transfer case NOTE: The four-wheel drive system will not allow shifts position have been met, the current position indicator between 2WD/4WD LOCK if the front and/or rear light will turn OFF, the selected position indicator light wheels are spinning (no traction).
Page 426: Electronically Shifted Transfer Case (Five-Position Switch) - If Equipped
424 STARTING AND OPERATING 2. Shift the transmission into NEUTRAL. NOTE: • If Steps 1 or 2 of either the Preferred or Alternate 3. While still rolling, rotate the transfer case control switch to the desired position. Procedure are not satisfied prior to attempting the shift, then the desired position indicator light will flash 4.
Page 427 STARTING AND OPERATING 425 • Four-wheel drive low range (4WD LOW) • Neutral (NEUTRAL) This electronically shifted transfer case is designed to be driven in the two–wheel drive position (2WD) or four- wheel drive position (4WD AUTO) for normal street and highway conditions on dry hard surfaced roads).
Page 428 426 STARTING AND OPERATING and rear wheels to rotate at the same speed. This is cluster and indicate the current and desired transfer case accomplished by rotating the 4WD Control Switch to the selection. When you select a different transfer case posi- desired position.
Page 429 STARTING AND OPERATING 427 NOTE: Before retrying a selection, make certain that all WARNING! the necessary requirements for selecting a new transfer case position have been met. To retry the selection, turn Always engage the parking brake when powering the control knob back to the current position, wait five down the vehicle if the “SVC 4WD Warning Light”...
Page 430 428 STARTING AND OPERATING Proper operation of four-wheel drive vehicles depends For additional information on the appropriate use of each on tires of equal size, type and circumference on each transfer case mode position, see the information below: wheel. Any difference in tire size can cause damage to the drivetrain.
Page 431 STARTING AND OPERATING 429 4WD LOW Shifting Procedure Four-Wheel Drive Low Range - This range provides low NOTE: speed four-wheel drive. It maximizes torque to the front • If any of the requirements to select a new transfer case driveshaft , forcing the front and rear wheels to rotate at position have not been met, the transfer case will not the same speed.
Page 432: Electronically Shifted Transfer Case (Five-Position Switch) - If Equipped
430 STARTING AND OPERATING Electronically Shifted Transfer Case This electronically shifted transfer case provides five (Five-Position Switch) — If Equipped mode positions: • Two-wheel drive high range (2WD) This is an electronic shift transfer case and is operated by the 4WD Control Switch (Transfer Case Switch), which is •...
Page 433 STARTING AND OPERATING 431 drive will be automatically engaged when the vehicle NOTE: The transfer case NEUTRAL position is selected by depressing the recessed button (with a ballpoint pen or senses a loss of traction. Because the front axle is en- similar object) located in the center of the 4WD Control gaged, this mode will result in lower fuel economy than Switch.
Page 434 432 STARTING AND OPERATING 3. When the shift is complete, the indicator light for the The “SVC 4WD Warning Light” monitors the electronic selected position will stop flashing and remain ON. shift four-wheel drive system. If this light remains on after engine start up or illuminates during driving, it If One Or More Shift Conditions Are Not Met: means that the four-wheel drive system is not function-...
Page 435 STARTING AND OPERATING 433 AUTO or 4WD LOCK positions at a given road speed. WARNING! (Continued) Take care not to overspeed the engine and do not exceed disengages both the front and rear drive shafts from 25 mph (40 km/h). the powertrain and will allow the vehicle to move Proper operation of four-wheel drive vehicles depends regardless of the transmission position.
Page 436 434 STARTING AND OPERATING 4WD LOCK Shifting Procedure Four-Wheel Drive Lock Range - This range maximizes NOTE: torque to the front driveshaft, forcing the front and rear • If any of the requirements to select a new transfer case wheels to rotate at the same speed. Additional traction position have not been met, the transfer case will not for loose, slippery road surfaces only.
Page 437 STARTING AND OPERATING 435 2WD To 4WD AUTO Or 4WD LOCK Preferred Procedure 1. With the engine running, slow the vehicle to 2 to Press the desired position on the 4WD Control Switch to 3 mph (3 to 5 km/h). shift the transfer case.
Page 438: Air Suspension System (1500 Models Only) - If Equipped
If the ignition switch is not in the ON position, then the shift will not take place and no position indicator lights will be on or flashing. Air Suspension Switch AIR SUSPENSION SYSTEM (1500 MODELS ONLY) 1 — Up Button — IF EQUIPPED 2 — Down Button 3 —...
Page 439 STARTING AND OPERATING 437 the NRH position while the vehicle speed is below 4 — Normal Ride Height Indicator Lamp 35 mph (56 km/h). When in the OR1 position, if the (Customer selectable) vehicle speed remains between 40 mph (64 km/h) and 5 —...
Page 440 • Aero Mode (Lowers the vehicle approximately .6 in passenger entry and exit as well as lowering the rear of (15 mm) – 1500 Models Only – This position provides the vehicle for easier loading and unloading of cargo. improved aerodynamics by lowering the vehicle. The To enter Entry/Exit Mode, press the “Down”...
Page 441 STARTING AND OPERATING 439 (40 km/h) the Entry/Exit change will be cancelled. To must be closed. If a door is opened at any time while the return to Normal Height Mode, press the “Up” button vehicle is lowering the change will not be completed once while in Entry/Exit or drive the vehicle over until the open door(s) is closed.
Page 442: Air Suspension Modes
440 STARTING AND OPERATING NOTE: If equipped with a touch screen radio all Tire/Jack Mode enabling/disabling of air suspension features must be To assist with changing a spare tire, the air suspension done through the radio. Refer to “Uconnect® Access system has a feature which allows the automatic leveling Settings”...
Page 443: Electronic Vehicle Information Center (Evic)
STARTING AND OPERATING 441 Wheel Alignment Mode Settings” in “Understanding Your Instrument Panel” for further information. Before performing a wheel alignment this mode must be enabled. Refer to “Electronic Vehicle Information Center Electronic Vehicle Information Center (EVIC) (EVIC)” in “Understanding Your Instrument Panel” for Display Messages further information.
Page 444 442 STARTING AND OPERATING multiple indicators are flashing, the lowest solid indica- Automatic height changes will occur based on vehicle tor lamp is the position the system is working to achieve. speed and the current vehicle height. The indicator lamps and EVIC messages will operate the same for automatic Pressing the “UP”...
Page 445: Air Suspension System
STARTING AND OPERATING 443 • Transport Mode – No indicator lamps will be illumi- nated. Transport Mode is disabled by driving the vehicle. • Tire/Jack Mode – indicator lamps 3 and 6 will be illuminated. Tire/Jack Mode is disabled by driving the vehicle.
Page 446: Air Suspension Modes
444 STARTING AND OPERATING Trailer Mode (Lowers the vehicle approximately 1 in (25 WARNING! mm) – This position will lower the rear suspension and provide load leveling for all loading conditions including The air suspension system uses a high pressure towing a trailer.
Page 447 STARTING AND OPERATING 445 NOTE: This mode is intended to be enabled with engine NOTE: This mode is intended to be enabled with engine running. running. Transport Mode Protection Mode To assist with flat bed towing, the air suspension system In order to “protect”...
Page 448: Electronic Vehicle Information Center (Evic) Display Messages
446 STARTING AND OPERATING Electronic Vehicle Information Center (EVIC) NOTE: The LED will continuously blink until Normal Display Messages Ride Height (NRH) has been achieved. • Transport Mode – No indicator lamps will be illumi- When the appropriate conditions exist, a message will appear in the EVIC display.
Page 449 STARTING AND OPERATING 447 stuck. The locking front and rear differentials should only The locking axles are controlled by the axle locker switch. be engaged during low-speed, extreme off-road situa- The switch has three positions, AXLE UNLOCK, REAR tions where one wheel is likely to not be in contact with LOCK, and FRONT/REAR LOCK.
Page 450 448 STARTING AND OPERATING To lock the rear axle, place the vehicle in 4LO. Refer to WARNING! “Four Wheel Drive Operation” in “Starting and Operat- ing” for further information. Move the axle locker switch Do not use the locked axle position for normal position to REAR LOCK while traveling less than 3 mph driving.
Page 451: Stabilizer/Sway Bar System - Power
STARTING AND OPERATING 449 NOTE: The axle lockers could be torque locked due to advantage to increasing ride height is the positive effect side to side loads on the axle. Driving slowly while it has on approach/departure and break over angles. turning the steering wheel from a left hand turn to a right This system is controlled by the electronic control sway hand turn or driving in REVERSE for a short distance...
Page 452 450 STARTING AND OPERATING The switch has two positions; On-Road and Off-Road. To disconnect the stabilizer/sway bar, shift to either 4HI The system is normally in the On-Road mode, indicated or 4LO as shown in “Four Wheel Drive Operation” and by a solid green light.
Page 453: Safe Off-Road Driving - Power
STARTING AND OPERATING 451 agency to determine the designated off-road vehicle WARNING! (ORV) trails or recreation areas. You should always tread lightly and only use established roads, trails or ORV If the stabilizer/sway bar will not return to On-Road recreational areas. The National Forest Service, Bureau of mode, vehicle stability is greatly reduced.
Page 454 452 STARTING AND OPERATING ramp without lifting any other wheel off the ground. This CAUTION! distance up the ramp divided by the wheelbase of the vehicle and multiplied by 1,000 is the RTI. This vehicle The door sill height is 25 inches. Water may intrude has an RTI of 655, which means you can articulate one into the interior of the vehicle at greater depths.
Page 455 STARTING AND OPERATING 453 mud, snow and ice. Every surface has a different effect on WARNING! your vehicle’s steering, handling and traction. Control- ling your vehicle is one of the keys to successful off-road Always wear your seat belt and firmly tie down driving, so always keep a firm grip on the steering wheel cargo.
Page 456: Driving In Snow, Mud And Sand
454 STARTING AND OPERATING Driving In Snow, Mud And Sand CAUTION! There is a drastic reduction in traction when driving in On icy or slippery roads, do not downshift at high snow, mud or sand. The vehicle will be less responsive to engine RPMs or vehicle speeds because engine brak- steering, acceleration and braking inputs.
Page 457: Crossing Obstacles
STARTING AND OPERATING 455 • Sand – Soft sand is very difficult to travel through with CAUTION! full tire pressure. When crossing soft sandy spots in a Reduced tire pressures may cause tire unseating and trail maintain your vehicle’s momentum and do not total loss of air pressure.
Page 458 456 STARTING AND OPERATING will lift your undercarriage over the obstacle. The tread of WARNING! the tire is tougher and thicker than the side wall and is designed to take the abuse. Always look ahead and make Crossing obstacles can cause abrupt steering system every effort to cross the large rocks with your tires.
Page 459 STARTING AND OPERATING 457 any large obstacle with steep sides at an angle great accelerator to avoid spinning the log out from under your enough to put the vehicle at risk of a rollover. If you get tires. Then ease the vehicle off the log using your brakes. caught in a rut, dig a small trench to the right or left at a 45-degree angle ahead of the front tires.
Page 460: Hill Climbing
458 STARTING AND OPERATING vehicle if something goes wrong? If everything looks CAUTION! good and you feel confident, then change transmission into a lower gear, shift the transfer case into 4L (Low) and Winching or rocking the vehicle off hard objects proceed with caution.
Page 461 STARTING AND OPERATING 459 fresh bite into the surface and will usually provide then make sure you are in 4L (Low Range) with the transmission in first gear (manually select first gear on enough traction to complete the climb. If you do not automatic transmissions) and proceed with caution.
Page 462: Driving Through Water
460 STARTING AND OPERATING WARNING! WARNING! Driving across an incline increases the risk of a If the engine stalls or you lose headway or cannot rollover , which may result in severe injury. make it to the top of a steep hill or grade, never attempt to turn around.
Page 463 STARTING AND OPERATING 461 avoid damage to the environment. You should know CAUTION! your vehicle’s abilities and be able to recover it if something goes wrong. You should never stop or shut a Water ingestion into the axles, transmission, transfer vehicle off when crossing deep water unless you ingested case, engine or vehicle interior can occur if you drive water into the engine air intake.
Page 464 462 STARTING AND OPERATING crossing is the water depth, current and bottom con- CAUTION! ditions. On soft bottoms the vehicle will sink in, effectively increasing the water level on the vehicle. Be Muddy waters can reduce the cooling system effec- sure to consider this when determining the depth and tiveness by depositing debris onto the radiator.
Page 465: Airing Down For Off-Road Driving
STARTING AND OPERATING 463 downstream out of control if the water is deep enough for better flotation and ability to mold or form to the ground contour. Different terrain, tires, and vehicles require differ- to push on the large surface area of the vehicle’s body. ent tire pressure.
Page 466: Vehicle Recovery
464 STARTING AND OPERATING Vehicle Recovery vehicle impingement on the surroundings, then using a tow strap to the vehicle tow hooks would be fast and If you drive off-road, you may encounter a situation easy. If the vehicle is severely hung up or in a situation where you will need to recover your vehicle.
Page 467 STARTING AND OPERATING 465 • Using The Tow Hooks With A Tow Strap – Tow straps DRIVE to REVERSE, while applying throttle after each shift. During this process, for additional traction, try are a quick and easy way to recover your vehicle from turning your steering wheel quickly back and forth no minor situations if you have a secondary vehicle which more than a ¼...
Page 468 466 STARTING AND OPERATING providing the pulling force needed to free the vehicle. WARNING! (Continued) The vehicle being recovered should assist in the recov- or three feet of slack in the strap. More slack than this ery, at the time of the snap, by slowly spinning the tires greatly increases the risk of injury and vehicle dam- in the same direction as the pulling vehicle.
Page 469: After Driving Off-Road
STARTING AND OPERATING 467 straight as possible. Use block and tackle if necessary to WARNING! improve the angle of pull or increase the winch’s pulling force. If the anchor point is a tree use a strap around its Winch cables are under high tension when in use and base and hook the cable to the strap.
Page 470 468 STARTING AND OPERATING • Inspect the radiator for mud and debris and clean as WARNING! required. Abrasive material in any part of the brakes may cause • Check threaded fasteners for looseness, particularly on excessive wear or unpredictable braking. You might the chassis, drivetrain components, steering, and sus- not have full braking power when you need it to pension.
Page 471: Limited-Slip Differential
STARTING AND OPERATING 469 LIMITED-SLIP DIFFERENTIAL WARNING! The limited-slip differential provides additional traction On vehicles equipped with a limited-slip differential on snow, ice, mud, sand and gravel, particularly when never run the engine with one rear wheel off the there is a difference between the traction characteristics ground since the vehicle may drive through the rear of the surface under the right and left rear wheels.
Page 472: Traction
470 STARTING AND OPERATING when there is a difference in the surface traction under 1. Slow down during rainstorms or when the roads are the rear (driving) wheels. slushy. 2. Slow down if the road has standing water or puddles. WARNING! 3.
Page 473: Flowing/Rising Water
STARTING AND OPERATING 471 Flowing/Rising Water CAUTION! • Always check the depth of the standing water WARNING! before driving through it. Never drive through Do not drive on or across a road or path where water standing water that is deeper than the bottom of is flowing and/or rising (as in storm run-off).
Page 474: Off-Road Driving Tips
472 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Driving through standing water may cause damage • Driving through standing water limits your vehi- to your vehicle’s drivetrain components. Always cle’s traction capabilities. Do not exceed 5 mph inspect your vehicle’s fluids (i.e., engine oil, trans- (8 km/h) when driving through standing water.
Page 475: After Driving Off-Road
STARTING AND OPERATING 473 • Completely inspect the underbody of your vehicle. choose a mild angle and keep as little side tilt as possible. Keep the vehicle moving and make turns slowly and Check tires, body structure, steering, suspension, and cautiously.
Page 476: Winch Usage - Power Wagon Only
474 STARTING AND OPERATING WINCH USAGE — POWER WAGON ONLY — (IF WARNING! EQUIPPED) Abrasive material in any part of the brakes may cause Things To Know Before Using Your Winch excessive wear or unpredictable braking. You might General Winch Information not have full braking power when you need it to prevent a collision.
Page 477 STARTING AND OPERATING 475 2. Attach the hook to a suitable anchor point. Low Voltage Interrupt Your winch is equipped with a device that will interrupt CAUTION! winch function if the vehicle charging system voltage drops to a low level. The winch will not power-in or out Be certain the anchor will withstand the load re- for 30 seconds if this device is tripped.
Page 478: Understanding The Features Of Your Winch
476 STARTING AND OPERATING Understanding The Features Of Your Winch Winch Components...
Page 479 STARTING AND OPERATING 477 1. Motor: The winch motor is powered by the vehicle 6. Clutch Lever: The clutch lever allows the winch drum charging system and features a thermal protection to be disconnected from the winch motor to allow the switch that automatically stops motor function in the wire rope to be pulled from the winch by hand.
Page 480: Winch Accessories
478 STARTING AND OPERATING Winch Accessories Snatch/Block Pulley: Used properly, the multi-purpose The following accessories are necessary to attach the snatch block allows you to (1) winch to anchors, change direction of pull, and for safe increase the winch’s pulling winching.
Page 481 STARTING AND OPERATING 479 Clevis/D-Shackles: Tree Trunk Protector: Typi- D-Shackle is a safe means of cally made of tough, high- connecting the looped ends of quality nylon, it provides the cables, straps and snatch operator an attachment point blocks. The shackle’s pin is for the winch rope to a wide threaded allow...
Page 482: Operating Your Winch
480 STARTING AND OPERATING Operating Your Winch WARNING! (Continued) • Always stand clear of wire rope and load and keep WARNING! others away during winching. • Always keep hands and clothing clear of the wire Failure to observe any of these warnings regarding proper winch usage may result in severe injury.
Page 483 STARTING AND OPERATING 481 3. Use the right equipment for the situation. WARNING! (Continued) 4. Always wear leather gloves and do not allow the wire • Always disconnect the remote control when not in rope to slip through your hands when handling the use.
Page 484 482 STARTING AND OPERATING 1. Inspect the winch, winch mount, and wire rope for CAUTION! (Continued) damage. Do not use the winch if the mount is loose or • Always inspect winch installation and wire rope rope shows excessive wear or damage. condition before operating the winch.
Page 485 STARTING AND OPERATING 483 3. Disengage the clutch to allow free spooling of the winch drum, rotate the clutch lever on the winch to disengage. Freespooling conserves battery power. Hook Strap 5. Pull the wire to the anchor point. Pull out enough wire rope to reach your anchor point.
Page 486 484 STARTING AND OPERATING Pulling Wire Rope Tree Trunk Protector 6. Secure to the anchor point. Once you have established CAUTION! your anchor point, secure the tree-trunk protector or choker-chain around the object. Always be certain the anchor you select will with- stand the load.
Page 487 STARTING AND OPERATING 485 NOTE: How to choose an anchor point: A secure anchor is critical to winching operations. An anchor must be strong enough to hold while winching. Natural anchors include trees, stumps and rocks. Hook the cable as low as possible.
Page 488 486 STARTING AND OPERATING 9. Connect the remote control to the winch control box, located behind the front bumper. Be careful not to let the remote control cord dangle in front of the winch. If you choose to control the winch from inside your vehicle, always pass the remote through a window to avoid pinching the cord in the door.
Page 489 STARTING AND OPERATING 487 12. Check wire rope. The wire rope should be neatly wound around the spooling drum. Improper wind- ing can cause damage to the wire rope. 11. Check your anchor. Make sure all connections are secured and free of debris before continuing with the winching procedure.
Page 490 488 STARTING AND OPERATING behind or in front of the vehicle and never near the In certain situations you may wire rope or snatch block. Your situation may have decide to throw a heavy blan- other no people zones. ket or similar object over the wire rope.
Page 491 STARTING AND OPERATING 489 rope is winding evenly and tightly around the spool- NOTE: ing drum. For additional assistance, the winched • Avoid overheating the winch motor. For extended vehicle can be slowly driven while being pulled by winching, stop at reasonable intervals to allow the the winch.
Page 492 490 STARTING AND OPERATING an uneven stack, spool out that section of the rope and reposition it to the opposite end of the drum, which will free up space for continued winching. 15. Secure vehicle. Once recovery of the vehicle is com- plete, be sure to secure the vehicle’s brakes and shift the transmission to PARK.
Page 493 STARTING AND OPERATING 491 NOTE: How to spool under no load: Arrange the re- mote control lead so it cannot be caught in the winch. Arrange the wire rope so it will not kink or tangle when spooled. Be sure any wire rope already on the spooling drum is wound tightly and evenly layered.
Page 494: Rigging Techniques
492 STARTING AND OPERATING Rigging Techniques How To Change The Pulling Direction Various winching situations will require application of other winching techniques. These could range from too little distance to achieve maximum pull using straight line rigging, simply increasing pulling power, or main- taining a straight-line pulling situation.
Page 495 STARTING AND OPERATING 493 All winching operations should have a straight line from Double Line the winch to the object being pulled. This minimizes the wire rope collecting on one side of the drum affecting pulling efficiency and damaging wire rope. A snatch block, secured to a point directly in front of the vehicle will enable you to change your pulling direction while still allowing the wire rope to be at 90°...
Page 496: Power Steering - 1500 Models
(tighten and back-off 1/2 turn). If the Steering icon is displayed and the “POWER STEER- POWER STEERING — 1500 MODELS ING SYSTEM OVER TEMP” message is displayed on the The electric power steering system will give you good...
Page 497: Power Steering - 2500/3500 Models
STARTING AND OPERATING 495 If the Steering icon is displayed and the “SERVICE POWER STEERING — 2500/3500 MODELS POWER STEERING – ASSIST OFF” message is displayed The standard power steering system will give you good the EVIC screen, they indicate the vehicle needs to be vehicle response and increased ease of maneuverability taken to the dealer for service.
Page 498: Power Steering Fluid Check - 2500/3500 Models
496 STARTING AND OPERATING • Upon initial start-up in cold weather, the power steer- Power Steering Fluid Check — 2500/3500 Models ing pump may make noise for a short amount of time. Checking the power steering fluid level at a defined This is due to the cold, thick fluid in the steering service interval is not required.
Page 499: Fuel Saver Technology 5.7L/6.4L Engines Only - If Equipped
STARTING AND OPERATING 497 FUEL SAVER TECHNOLOGY 5.7L/6.4L ENGINES WARNING! ONLY — IF EQUIPPED Fluid level should be checked on a level surface and This feature offers improved fuel economy by shutting with the engine off to prevent injury from moving off four of the engine’s eight cylinders during light load parts and to ensure accurate fluid level reading.
Page 500 498 STARTING AND OPERATING The foot operated parking brake is located below the When the parking brake is applied with the ignition lower left corner of the instrument panel. To apply the switch ON, the “Brake Warning Light” in the instrument park brake, firmly push the park brake pedal fully.
Page 501 STARTING AND OPERATING 499 move the shift lever out of PARK. The parking brake should WARNING! (Continued) always be applied whenever the driver is not in the vehicle. • Do not leave the key fob in or near the vehicle (or in a location accessible to children, and do not WARNING! leave a vehicle equipped with Keyless Enter-N-...
Page 502: Brake System
500 STARTING AND OPERATING activation of the “Brake Warning Light” and the “ABS CAUTION! Warning Light” (if equipped) during brake use. If the Brake System Warning Light remains on with Four-Wheel Anti-Lock Brake System the parking brake released, a brake system malfunc- tion is indicated.
Page 503 STARTING AND OPERATING 501 with a separate computer to modulate hydraulic pressure Engagement of the ABS may be accompanied by a to prevent wheel lockup and help avoid skidding on pulsing sensation. You may also hear a clicking noise. slippery surfaces. These occurrences are normal, and indicate that the system is functioning.
Page 504: Hydraulic Brake Assist - 2500/3500 Models Only (Except Power Wagon)
502 STARTING AND OPERATING system. You may experience some clicking or hissing WARNING! (Continued) noises from the hydro-boost system during hard braking • The Anti-Lock Brake System (ABS) cannot prevent conditions. the natural laws of physics from acting on the NOTE: Under cold temperatures, pedal effort will be vehicle, nor can it increase braking or steering higher than normal until the power steering fluid reaches...
Page 505: Anti-Lock Brake System (Abs)
STARTING AND OPERATING 503 Anti-Lock Brake System (ABS) WARNING! (Continued) The ABS aids the driver in maintaining vehicle control • The ABS cannot prevent collisions, including those under adverse braking conditions. The system controls resulting from excessive speed in turns, following hydraulic brake pressure to prevent wheel lockup and another vehicle too closely, or hydroplaning.
Page 506: Brake Assist System (Bas) - If Equipped
504 STARTING AND OPERATING brake of the spinning wheel. This will allow more engine receive the benefit of BAS, you must apply continuous torque to be applied to the wheel that is not spinning. braking pressure during the stopping sequence. Do not This feature remains active even if TCS and ESC are in reduce brake pedal pressure unless braking is no longer the “Partial Off”...
Page 507: Hill Start Assist (Hsa) - If Equipped
STARTING AND OPERATING 505 the brake pedal during operation you may feel a slight WARNING! (Continued) pedal movement. The clicking and pedal movement is • The capabilities of a BAS-equipped vehicle must normal and both will stop when HSA becomes inactive. never be exploited in a reckless or dangerous HSA Activation Criteria manner which could jeopardize the user’s safety or...
Page 508 506 STARTING AND OPERATING Towing And Hauling With HSA WARNING! The HSA system does not know if your vehicle is loaded There may be situations on minor hills with a loaded or towing a trailer unless the TOW/HAUL switch, lo- vehicle or while pulling a trailer where the system cated on the center stack, is selected.
Page 509 STARTING AND OPERATING 507 WARNING! WARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle • If you use a trailer brake controller with your on a hill without putting the transmission in PARK trailer, your trailer brakes may be activated and or using the parking brake, it will roll down the deactivated with the brake switch.
Page 510: Electronic Stability Control (Esc) - If Equipped
508 STARTING AND OPERATING 3. With the engine running and the brake applied, rotate EVIC Equipped Vehicles the steering wheel 180° counterclockwise from center. HSA is a Customer Programmable Feature on an EVIC 4. Press the “ESC Off” switch four times within 20 equipped vehicle.
Page 511 STARTING AND OPERATING 509 the intended path, ESC applies the brake of the appro- this mode. This mode should be used for almost all priate wheel to assist in counteracting the oversteer or driving situations. ESC should only be turned to “Partial understeer condition.
Page 512 510 STARTING AND OPERATING ESC Partial Off pressing the “ESC Off” switch. This may be done while the vehicle is in motion. This mode is entered by momentarily pressing the “ESC Off” switch. When in Partial Off mode, the TCS portion WARNING! of ESC, except for the “limited slip”...
Page 513 STARTING AND OPERATING 511 All Four-Wheel Drive Vehicles In 4WD AUTO And NOTE: The “ESC OFF” message will display and the 4WD LOCK Modes Can Also Choose The audible chime will sound when the shift lever is placed Following ESC Operating Mode. This Is The Only into the PARK position from any other position and then Selectable ESC Operating Mode in 4WD LOW: moved out of the PARK position.
Page 514: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
512 STARTING AND OPERATING “ESC Off” is the only operating mode for ESC in 4WD ESC Activation/Malfunction Indicator Light And LOW. Whenever the vehicle is started in 4WD LOW or ESC OFF Indicator Light the transfer case (if equipped) is shifted from 4WD LOCK or NEUTRAL, to 4WD LOW, the ESC system will be in The “ESC Activation/Malfunction Indicator this mode.
Page 515: Trailer Sway Control (Tsc) - If Equipped
STARTING AND OPERATING 513 flashes when TCS is active. If the “ESC Activation/ when ESC becomes inactive following the maneuver Malfunction Indicator Light” begins to flash during ac- that caused the ESC activation. celeration, ease up on the accelerator and apply as little throttle as possible.
Page 516: Tire Safety Information
514 STARTING AND OPERATING further information. When TSC is functioning, the “ESC TIRE SAFETY INFORMATION Activation/Malfunction Indicator Light” will flash, the Tire Markings engine power may be reduced and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying.
Page 517 STARTING AND OPERATING 515 • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) - Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 518 516 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 519 STARTING AND OPERATING 517 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 520: Tire Identification Number (Tin)
518 STARTING AND OPERATING Tire Identification Number (TIN) the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is not found on the The TIN may be found on one or both sides of the tire, outboard side, then you will find it on the inboard side of however, the date code may only be on one side.
Page 521: Tire Terminology And Definitions
STARTING AND OPERATING 519 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 522: Tire Loading And Tire Pressure
520 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. B-Pillar Location For Tire And Loading Information Placard...
Page 523 STARTING AND OPERATING 521 Tire And Loading Information Placard 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading...
Page 524 522 STARTING AND OPERATING To determine the maximum loading conditions of your 4. The resulting figure equals the available amount of vehicle, locate the statement “The combined weight of cargo and luggage load capacity. For example, if occupants and cargo should never exceed XXX lbs or “XXX”...
Page 525 STARTING AND OPERATING 523 • For the following example, the combined weight of NOTE: occupants and cargo should never exceed 865 lbs • If your vehicle will be towing a trailer, load from your (392 kg). trailer will be transferred to your vehicle. The follow- ing table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and num-...
Page 526 524 STARTING AND OPERATING...
Page 527: Tires - General Information
STARTING AND OPERATING 525 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 528: Tire Inflation Pressures
526 STARTING AND OPERATING stability of the vehicle and can produce a feeling of WARNING! (Continued) sluggish response or over responsiveness in the steering. • Unequal tire pressures from one side of the vehicle NOTE: to the other can cause the vehicle to drift to the right or left.
Page 529: Tire Pressures For High Speed Operation
STARTING AND OPERATING 527 • Inspect tires for signs of tire wear or visible damage. Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind CAUTION! when checking tire pressure inside a garage, especially in the winter.
Page 530: Radial Ply Tires
528 STARTING AND OPERATING loading may be required for high-speed vehicle opera- Radial Ply Tires tion. Refer to your authorized tire dealer or original equipment vehicle dealer for recommended safe operat- WARNING! ing speeds, loading and cold tire inflation pressures. Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle WARNING!
Page 531: Tire Types
STARTING AND OPERATING 529 Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
Page 532: Run Flat Tires - If Equipped
530 STARTING AND OPERATING If you need snow tires, select tires equivalent in size and Run Flat Tires — If Equipped type to the original equipment tires. Use snow tires only Run Flat tires allow you the capability to drive 50 miles in sets of four;...
Page 533: Spare Tires - If Equipped
STARTING AND OPERATING 531 Spare Tires — If Equipped rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended NOTE: For vehicles equipped with TIREFIT instead of a tire rotation pattern. spare tire, please refer to “TIREFIT KIT”...
Page 534 532 STARTING AND OPERATING Do not install a wheel cover or attempt to mount a front or rear axle of your vehicle, but it is not. This spare conventional tire on the compact spare wheel, since the tire may have limited tread life. When the tread is worn wheel is designed specifically for the compact spare tire.
Page 535: Tire Spinning
STARTING AND OPERATING 533 Tire Spinning WARNING! When stuck in mud, sand, snow, or ice conditions, do not Limited-use spares are for emergency use only. In- spin your vehicle’s wheels above 30 mph (48 km/h) or for stallation of this limited-use spare tire affects vehicle longer than 30 seconds continuously without stopping.
Page 536: Tread Wear Indicators
534 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth Tread wear indicators are in the original equipment tires becomes 1/16 in (2 mm). When the tread is worn to the to help you in determining when your tires should be tread wear indicators, the tire should be replaced.
Page 537: Replacement Tires
STARTING AND OPERATING 535 Information placard or the Vehicle Certification Label for WARNING! the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original Tires and the spare tire should be replaced after six equipment tire sidewall.
Page 538: Supplemental Tire Pressure Information - If Equipped
536 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 539: Tire Chains (Traction Devices)
Follow these recommendations to guard Please follow the table below for proper tire size, chain against damage. type, and axle recommendations: Vehicle Axle Recommendations Tire Sizes Chain Class 1500 Models Rear Only P265/70R17 S Class 2500 Models Rear Only LT245/70R17E U Class...
Page 540 538 STARTING AND OPERATING WARNING! CAUTION! (Continued) • Install device as tightly as possible and then re- Using tires of different size and type (M+S, Snow) tighten after driving about ½ mile (0.8 km). between front and rear axles can cause unpredictable •...
Page 541: Tire Rotation Recommendations
STARTING AND OPERATING 539 TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “forward cross” shown in the following diagram. This rotation pattern Tires on the front and rear axles of vehicles operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed.
Page 542: Directional Tires - If Equipped
540 STARTING AND OPERATING Directional Tires — If Equipped Dual Rear Wheels — If Equipped For the R/T package with 22” tires and wheels, the The tires used on dual wheel assemblies should be rotational direction of the tire must be taken into consid- matched for wear to prevent overloading one tire in a set.
Page 543: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 541 TIRE PRESSURE MONITOR SYSTEM (TPMS) CAUTION! The Tire Pressure Monitor System (TPMS) will warn the 3500 Dual Rear Tires may only have one approved driver of a low tire pressure based on the vehicle recom- direction of rotation. This is to accommodate the mended cold placard pressure.
Page 544 542 STARTING AND OPERATING also increase as the vehicle is driven - this is normal and to be driven for up to 20 minutes above 15 mph there should be no adjustment for this increased pres- (25 km/h) in order for the TPMS to receive this informa- sure.
Page 545 STARTING AND OPERATING 543 NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance or to provide warning of a tire failure equipment tires and wheels. TPMS pressures and or condition.
Page 546: Base System
544 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, The matching full size spare wheel and tire assembly (if and the TPMS will monitor the actual tire pressure in equipped) has a TPM sensor. The matching full size spare the tire.
Page 547 STARTING AND OPERATING 545 message. Once the system receives the updated tire pres- 2. Installing aftermarket window tinting that contains sures, the system will automatically update and the “Tire materials that may block radio wave signals. Pressure Monitoring Telltale Light” and “LOW TIRE PRES- 3.
Page 548: Premium System - If Equipped
546 STARTING AND OPERATING • Various TPMS messages, which display in the Elec- 3. Driving the vehicle for up to 20 minutes above 15 mph (24 km/h) will turn off the “Tire Pressure Monitoring tronic Vehicle Information Center (EVIC), and Telltale Light”...
Page 549 STARTING AND OPERATING 547 of each tire with the low tire pressure values flashing or vehicle’s recommended cold placard pressure inflation in a different color. An Inflate to XX message will also be value as shown in the Inflate to XX message. Once the displayed.
Page 550 548 STARTING AND OPERATING SYSTEM message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 1. Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors.
Page 551: Tire Pressure Information System (Tpis) 3500
STARTING AND OPERATING 549 2. If you install the full size spare in place of a road tire Tire Pressure Information System (TPIS) 3500 that has a pressure below the low-pressure warning Series Trucks limit, upon the next ignition switch cycle, a chime will Your vehicle may be equipped with a Tire Pressure sound and the “Tire Pressure Monitoring Telltale Information System (TPIS).
Page 552 550 STARTING AND OPERATING • Six TPM sensors (Dual Rear Wheel (DRW) applica- If the ignition switch is cycled, this sequence will repeat, tions) providing the system fault still exists. If the system fault no longer exists, the SERVICE TPM SYSTEM message •...
Page 553: General Information
STARTING AND OPERATING 551 General Information FUEL REQUIREMENTS This device complies with Part 15 of the FCC rules and 3.6L/6.4L Engine RSS 210 of Industry Canada. Operation is subject to the following conditions: These engines are designed to meet all •...
Page 554: 5.7L Engines
552 STARTING AND OPERATING 5.7L Engines Over 40 auto manufacturer’s world wide have issued and endorsed consistent gasoline specifications (the World- wide Fuel Charter, WWFC) which define fuel properties This engine is designed to meet all emis- necessary to deliver enhanced emissions, performance, sions regulations and provide satisfactory and durability for your vehicle.
Page 555: Gasoline/Oxygenate Blends
STARTING AND OPERATING 553 Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-Flex Fuel Vehicles (FFV) are compatible with gaso- genates such as Ethanol. Fuels blended with oxygenates line containing 10% ethanol (E10). Gasoline with higher may be used in your vehicle.
Page 556: Mmt In Gasoline
554 STARTING AND OPERATING • Change the engine oil and oil filter. therefore, you should ask your gasoline retailer whether the gasoline contains MMT. MMT is prohibited in Federal • Disconnect and reconnect the battery to reset the and California reformulated gasoline. engine controller memory.
Page 557: Fuel System Cautions
STARTING AND OPERATING 555 Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 558: Carbon Monoxide Warnings
556 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 559: Ethanol Fuel (E-85)
STARTING AND OPERATING 557 E-85 Fuel Cap E-85 Badge Ethanol Fuel (E-85) CAUTION! E-85 is a mixture of approximately 85% fuel ethanol and Only vehicles with the E-85 fuel filler door label can 15% unleaded gasoline. operate on E-85.
Page 560: Fuel Requirements
558 STARTING AND OPERATING • you operate the vehicle immediately after refueling for WARNING! a period of at least 5 minutes Ethanol vapors are extremely flammable and could Observing these precautions will avoid possible hard cause serious personal injury. Never have any smok- starting and/or significant deterioration in driveability ing materials lit in or near the vehicle when remov- during warm up.
Page 561: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
Because E-85 fuel contains less energy per gallon/liter tensive fleet testing, to provide additional protection to than gasoline, you will experience an increase in fuel Chrysler Group LLC engines. Use MOPAR® or an consumption. You can expect your miles per gallon equivalent oil meeting the specification MS-6395.
Page 562: Replacement Parts
560 STARTING AND OPERATING Replacement Parts ADDING FUEL Many components in your Flexible Fuel Vehicle (FFV) are The fuel filler cap (gas cap) is located behind the fuel designed to be compatible with ethanol. Always be sure filler door, on the left side of the vehicle. Open the fuel that your vehicle is serviced with correct ethanol com- door and remove the fuel cap by turning it counter- patible parts.
Page 563 STARTING AND OPERATING 561 NOTE: When removing the fuel filler cap, lay the cap WARNING! tether in the hook, located on the fuel filler door. • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is CAUTION! being filled.
Page 564: Loose Fuel Filler Cap Message
562 STARTING AND OPERATING Loose Fuel Filler Cap Message WARNING! Static electricity can cause an ignition of flammable If the vehicle diagnostic system determines liquid, vapor or gas in any vehicle or trailer. To that the fuel filler cap is loose, improperly reduce risk of serious injury or death when filling installed, or damaged, a loose gascap indicator containers:...
Page 565 STARTING AND OPERATING 563 This label contains the month and year of manufacture, Gross Axle Weight Rating (GAWR) Gross Vehicle Weight Rating (GVWR), Gross Axle Weight The GAWR is the maximum permissible load on the front Rating (GAWR) front and rear, and Vehicle Identification and rear axles.
Page 566 564 STARTING AND OPERATING Inflation Pressure The weight on the front and rear of the vehicle should then be determined separately to be sure that the load is This is the cold tire inflation pressure for your vehicle for properly distributed over the front and rear axle. Weigh- all loading conditions up to full GAWR.
Page 567: Trailer Towing
STARTING AND OPERATING 565 Common Towing Definitions CAUTION! The following trailer towing related definitions will assist Do not load your vehicle any heavier than the GVWR you in understanding the following information: or the maximum front and rear GAWR. If you do, Gross Vehicle Weight Rating (GVWR) parts on your vehicle can break, or it can change the way your vehicle handles.
Page 568 566 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) Tongue Weight (TW) The GCWR is the total permissible weight of your vehicle The tongue weight is the downward force exerted on the and trailer when weighed in combination. hitch ball by the trailer. In most cases it should not be less than 10% of the trailer load.
Page 569 STARTING AND OPERATING 567 If equipped, the electronic Trailer Sway Control (TSC) Weight-Distributing Hitch recognizes a swaying trailer and automatically applies A weight-distributing system works by applying lever- individual wheel brakes and/or reduces engine power to age through spring (load) bars. They are typically used attempt to eliminate the trailer sway.
Page 570 568 STARTING AND OPERATING Fifth-Wheel Hitch WARNING! The fifth-wheel hitch is a special high platform with a • An improperly adjusted Weight Distributing Hitch coupling that mounts over the rear axle of the tow vehicle system may reduce handling, stability, braking in the truck bed.
Page 571: Trailer Hitch Type And Maximum Trailer Weight
Trailer Weight All trailer hitches should be professionally installed on Class III Bumper 5,000 lbs (2 268 kg) your vehicle. Hitch - 1500 Model Class IV - 1500 10,450 lbs (4 740 kg) Model Class V - 2500/3500 17,000 lbs (7 711 kg)
Page 572: Trailer Towing Weights (Maximum Trailer Weight Ratings)
570 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The rear bumper is intended to tow trailers up to a 5,000 lbs (2 268 kg) without added equipment or alterations to the standard equipment. Ram 1500 4x2 SLT/Outdoorsman Sport/Laramie 3.6L V-6...
Page 573 STARTING AND OPERATING 571 Ram 1500 4x4 SLT/Outdoorsman Sport/Laramie 3.6L V-6 Standard Towing: 5,000 lbs Standard Towing: 5,000 lbs – 8–Speed Auto- (2 268 kg) (2 268 kg) matic Trans- Max Towing: 7,250 lbs Max Towing: 7,200 lbs mission (3 289 kg)
Page 574 572 STARTING AND OPERATING Ram 2500 And 3500 SLT/Outdoorsman/Sport Laramie 5.7L HEMI® Max Towing: 13,850 lbs Max Towing: 13,810 lbs Max Towing: 13,350 lbs V-8 6–Speed (6 282 kg) (6 282 kg) (6 055 kg) Automatic Max Payload: 4,480 lbs Max Payload: 4,440 lbs Max Payload: 4,410 lbs Transmission...
Page 575: Trailer And Tongue Weight
STARTING AND OPERATING 573 Trailer And Tongue Weight Always load a trailer with 60% of the weight in the front of the trailer. This places 10% of the GTW on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the vehicle and trailer.
Page 576: Towing Requirements
574 STARTING AND OPERATING NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options or dealer-installed options must trailer is towed, do not drive over 50 mph (80 km/h) be considered as part of the total load on your vehicle.
Page 577 STARTING AND OPERATING 575 WARNING! (Continued) WARNING! (Continued) • When hauling cargo or towing a trailer, do not over- • GCWR must not be exceeded. • Total weight must be distributed between the tow load your vehicle or trailer. Overloading can cause a loss of control, poor performance or damage to vehicle and the trailer such that the following four brakes, axle, engine, transmission, steering, suspen-...
Page 578 576 STARTING AND OPERATING • Check the trailer tires for proper tire inflation pres- • An electronically actuated trailer brake controller is sures before trailer usage. required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with •...
Page 579 STARTING AND OPERATING 577 WARNING! • Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have an accident. •...
Page 580 578 STARTING AND OPERATING The user interface consists of the following: sliding the manual brake control lever will display the GAIN setting for 10 seconds and the “Trailer Brake Status Manual Brake Control Lever Indicator Light” will not be displayed. Slide the manual brake control lever to the right to If a fault is detected in the trailer wiring or the Integrated activate power to the trailer’s electric brakes independent...
Page 581 Type appears on the screen. justed. See your trailer dealer if necessary. NOTE: 1500 Models Only — Light Electric and Heavy 2. Hook up the trailer and make the electrical connec- Electric will only be available due to the tow capacities of tions according to the trailer manufacturer’s instruc-...
Page 582 580 STARTING AND OPERATING 9. If the trailer wheels lockup (indicated by squealing Repeat steps 8 and 9 until the GAIN setting is at a point tires), reduce the GAIN setting; if the trailer wheels just below trailer wheel lockup. If towing a heavier turn freely, increase the GAIN setting.
Page 583 STARTING AND OPERATING 581 NOTE: CAUTION! • An aftermarket controller may be available for use Connecting a trailer that is not compatible with the with trailers with air or electric-over-hydraulic trailer ITBM system may result in reduced or complete loss brake systems.
Page 584 582 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
Page 585: Towing Tips
STARTING AND OPERATING 583 Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic. Automatic Transmission The “DRIVE” range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.
Page 586: Starting And Operating
584 STARTING AND OPERATING When towing a loaded trailer up steep grades at low Electronic Speed Control — If Equipped speeds (20 mph [32 km/h] or below), holding your • Do not use in hilly terrain or with heavy loads. vehicle in first gear (using the ERS switches) can help to •...
Page 587: Snowplow
Using this vehicle for snowplow applications can cause damage to the vehicle. SNOWPLOW 1500 Models Only WARNING! NOTE: Do not use this model vehicle for snowplow Attaching a snowplow to this vehicle could adversely applications.
Page 588: 2500/3500 Models Only
586 STARTING AND OPERATING WARNING! (Continued) WARNING! Do not expect that the airbag will perform as de- Attaching a snowplow to this vehicle could adversely scribed earlier in this manual. affect performance of the airbag system in a collision. Do not expect that the airbag will perform as de- 2500/3500 Models Only scribed earlier in this manual.
Page 589 STARTING AND OPERATING 587 The cutting edge should be ¼ to ½ in (6 cm to 1.2 cm) options, and cargo, must not exceed either the Gross above ground in snow plowing position. Vehicle Weight (GVWR) or Gross Axle Weight (GAWR) ratings.
Page 590 588 STARTING AND OPERATING Over The Road Operation With Snowplow Attached Keep all snowplow electrical connections and battery terminals clean and free of corrosion. The blade restricts air flow to the radiator and causes the engine to operate at higher than normal temperatures. When plowing snow, to avoid transmission and drive- Therefore, when transporting the plow, angle the blade train damage, the following precautions should be ob-...
Page 591: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 589 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF Two-Wheel Four-Wheel Drive Models The Ground Drive Models Flat Tow NONE See Instructions • Automatic transmission in PARK ALLOWED • Manual transmission in gear (NOT in NEUTRAL) •...
Page 592: Recreational Towing - Two-Wheel Drive Models
590 STARTING AND OPERATING NOTE: Vehicles equipped with air suspension must be 1. Properly secure the dolly to the tow vehicle, following lowered to the “Entry/Exit” (lowest) level, and have the dolly manufacturer’s instructions. automatic leveling disabled, before tying them down 2.
Page 593: Recreational Towing - Four-Wheel Drive Models
STARTING AND OPERATING 591 CAUTION! CAUTION! • Towing with the rear wheels on the ground will • Front or rear wheel lifts must not be used. Internal cause severe transmission damage. Damage from damage to the transmission or transfer case will improper towing is not covered under the New occur if a front or rear wheel lift is used when Vehicle Limited Warranty.
Page 594 592 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Towing this vehicle in violation of the above re- You or others could be injured or killed if you leave quirements can cause severe transmission and/or the vehicle unattended with the transfer case in the transfer case damage.
Page 595 STARTING AND OPERATING 593 1. Bring the vehicle to a complete stop, with the engine shift to NEUTRAL (N) is complete. After the shift is running. Firmly apply the parking brake. completed and the NEUTRAL (N) light stays on, release the NEUTRAL (N) button. 2.
Page 596 594 STARTING AND OPERATING 11. Shift the transmission into PARK or place manual met during the shift, the NEUTRAL (N) indicator light transmission in gear (NOT in Neutral). On 8-speed will flash continuously until all requirements are met transmissions the shifter will automatically select or until the NEUTRAL (N) button is released.
Page 597 STARTING AND OPERATING 595 3. Press and hold the brake pedal. NOTE: When shifting out of transfer case NEUTRAL (N), turning the engine OFF is not required, but may be 4. Start the engine. Shift the transmission into NEU- helpful to avoid gear clash. With the 8-speed automatic TRAL.
Page 598 596 STARTING AND OPERATING • The ignition switch must be in the ON/RUN position 11. Shift the transmission into gear, release the brake pedal (and clutch pedal on manual transmissions), for a shift to take place and for the position indicator and check that the vehicle operates normally.
Page 599: What To Do In Emergencies
HAZARD WARNING FLASHERS ...599 ▫ Jack Instructions (1500 Series) ... . .610 IF YOUR ENGINE OVERHEATS ... .599 ▫...
Page 600 598 WHAT TO DO IN EMERGENCIES ▫ Jack Instructions (2500, 3500 Series) ..628 EMERGENCY TOW HOOKS — IF EQUIPPED . .647 ▫ To Stow The Flat Or Spare ....636 SHIFT LEVER OVERRIDE .
Page 601: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 599 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the upper switch bank just below the radio. potential for overheating by taking the appropriate action. •...
Page 602: Wheel And Tire Torque Specifications
N·m) to cool. Never try to open a cooling system pressure **Use only Chrysler recommended lug nuts/bolts and cap when the radiator or coolant bottle is hot. clean or remove any dirt or oil before tightening.
Page 603 WHAT TO DO IN EMERGENCIES 601 NOTE: Dual wheels are flat mounted, center piloted. Inspect the wheel mounting surface prior to mounting The lug nuts are a two-piece assembly. When the tires are the tire and remove any corrosion or loose particles. being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the lug nut/bolt and the washer.
Page 604: Jacking And Tire Changing 1500 Series Trucks
Failure to follow this warning may result in personal injury. JACKING AND TIRE CHANGING 1500 SERIES TRUCKS WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Page 605: Jack Location
WHAT TO DO IN EMERGENCIES 603 NOTE: To assist with changing a spare tire, the air WARNING! (Continued) suspension system has a feature which allows the auto- • Being under a jacked-up vehicle is dangerous. The matic leveling to be disabled. Refer to “Electronic Vehicle vehicle could slip off the jack and fall on you.
Page 606: Removal Of Jack And Tools (1500 Series)
604 WHAT TO DO IN EMERGENCIES Removal Of Jack And Tools (1500 Series) To access the jack and jack tools you must remove the plastic access cover, located on the side of the front passengers seat. To remove the cover, pull the front part of the cover (closest to the front of the seat) toward you to release a locking tab.
Page 607 WHAT TO DO IN EMERGENCIES 605 Jack And Tools (1500 Series) Jack And Tool Bag Release the tool bag straps from the jack and remove tools from bag.
Page 608: Removing The Spare Tire
606 WHAT TO DO IN EMERGENCIES WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 609 WHAT TO DO IN EMERGENCIES 607 Inserting The Jack Extension Tube Into The Access Hole Rotating The Wheel Wrench Handle 2. Rotate the wheel wrench handle counterclockwise 3. Pull the spare tire out from under the vehicle to gain until the spare tire is on the ground with enough cable access to the spare tire retainer.
Page 610 608 WHAT TO DO IN EMERGENCIES Pulling The Spare Tire Out Gaining Access To The Retainer 4. Lift the spare tire with one hand to give clearance to 5. Pull the retainer through the center of the wheel. tilt the retainer at the end of the cable.
Page 611: Preparations
WHAT TO DO IN EMERGENCIES 609 Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 612: Jack Instructions (1500 Series)
610 WHAT TO DO IN EMERGENCIES 5. Turn the ignition OFF. Jack Instructions (1500 Series) WARNING! Block both the front and rear of the Carefully follow these tire changing warnings to wheel diagonally opposite the jacking help prevent personal injury or damage to your position.
Page 613 WHAT TO DO IN EMERGENCIES 611 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a Jack Warning Label service center where it can be raised on a lift.
Page 614 612 WHAT TO DO IN EMERGENCIES 4x2 Series Trucks Front Jacking Location There is a jack location indicator on the rear portion of the lower control arm. 4X2 Front Jacking Location 4x4 Series Trucks Front Jacking Location There is a jack location indicator on the rear portion of the lower control arm.
Page 615 WHAT TO DO IN EMERGENCIES 613 4X4 Front Jacking Location Indicator 4X4 Front Jacking Location When changing a front wheel, place the scissor jack 4x2 and 4x4 Rear Jacking Location under the rear portion of the lower control arm as shown Operate the jack using the jack drive tube and the wheel below.
Page 616 614 WHAT TO DO IN EMERGENCIES For 4x2 and 4x4 trucks, when changing a rear wheel, Connect the jack tube extension and wheel wrench. assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the CAUTION! axle between the wheel and the shock bracket with the Before raising the wheel off the ground, make sure...
Page 617 WHAT TO DO IN EMERGENCIES 615 end of the wheel nuts toward the wheel. To avoid the 7. Install the wheel center cap and remove the wheel risk of forcing the vehicle off the jack, do not fully blocks. Do not install chrome or aluminum wheel tighten the wheel nuts until the vehicle has been center caps on the spare wheel.
Page 618: To Stow The Flat Or Spare
616 WHAT TO DO IN EMERGENCIES To Stow The Flat Or Spare NOTE: Vehicles equipped with aluminum wheels can- not be stored under the vehicle because the wheel retainer will not fit through the wheel pilot hole. Secure the flat tire in the bed of the truck. Have the flat tire repaired or replaced immediately.
Page 619 WHAT TO DO IN EMERGENCIES 617 Pulling The Retainer Through The Center Of The Wheel Wheel Wrench And Jack Extension Tube Assembled And And Positioning It In Position 3. Attach the wheel wrench to the jack extension tube with the curved angle facing away from the vehicle. Insert the tube through the access hole between the lower tailgate and the top of the bumper and into the winch mechanism tube.
Page 620: Reinstalling The Jack And Tools (1500 Series)
It cannot winch. be overtightened. Push against the tire several times to Reinstalling The Jack And Tools (1500 Series) ensure it is firmly in place. 1. Tighten the jack all the way down by turning the jack turn-screw counterclockwise until the jack is snug.
Page 621 WHAT TO DO IN EMERGENCIES 619 Jack And Tools Tied Jack And Tool Bag 3. Secure the tool bag straps to the jack.
Page 622 Reinstall the plastic cover. under the seat so that the bottom slot engages into the fastener on the floor. Jack And Tools (1500 Series) Jack Hold Down Fastener NOTE: Ensure that the jack slides into the front hold down location.
Page 623: Jacking And Tire Changing 2500 And 3500 Series Trucks
WHAT TO DO IN EMERGENCIES 621 WARNING! WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The After using the jack and tools, always reinstall them vehicle could slip off the jack and fall on you. You in the original carrier and location. While driving could be crushed.
Page 624: Removal Of Jack And Tools (2500, 3500 Series)
622 WHAT TO DO IN EMERGENCIES Removal Of Jack And Tools (2500, 3500 Series) To access the jack and jack tools you must remove the plastic access cover, located on the side of the front passengers seat. To remove the cover, pull the front part of the cover (closest to the front of the seat) toward you to release a locking tab.
Page 625 WHAT TO DO IN EMERGENCIES 623 Jack And Tools (2500/3500 Series) Jack And Tools Bracket Assembly Remove the jack and tools from the bracket assembly. Turn the jack-turn-screw counterclockwise to release jack from bracket assembly.
Page 626: Removing The Spare Tire
624 WHAT TO DO IN EMERGENCIES WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 627 WHAT TO DO IN EMERGENCIES 625 Inserting The Jack Extension Tube Into The Access Hole Rotating The Wheel Wrench Handle 2. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle.
Page 628 626 WHAT TO DO IN EMERGENCIES 3. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Gaining Access To The Retainer 5. Pull the retainer through the center of the wheel. Pulling The Spare Tire Out 4.
Page 629: Preparations
WHAT TO DO IN EMERGENCIES 627 Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 630: Jack Instructions (2500, 3500 Series)
628 WHAT TO DO IN EMERGENCIES 5. Turn the ignition OFF. Jack Instructions (2500, 3500 Series) WARNING! Block both the front and rear of the Carefully follow these tire changing warnings to wheel diagonally opposite the jacking help prevent personal injury or damage to your position.
Page 631 WHAT TO DO IN EMERGENCIES 629 WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a Jack Warning Label service center where it can be raised on a lift.
Page 632 630 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare wheel, jack, and tools from storage. NOTE: If your vehicle is equipped with hub caps/wheel covers they must be removed before raising the vehicle off the ground.
Page 633 WHAT TO DO IN EMERGENCIES 631 Operate the jack using the jack drive tube and the wheel wrench. The tube extension, may be used, but is not required. Lug Wrench Adapter And Wrench 3. Placement of the jack: 4x2 Series Trucks Front Jacking Location 4x2 Front Jacking Location For 2500 and 3500 4x2 series trucks, when changing a front wheel, place the bottle jack under the frame rail...
Page 634 632 WHAT TO DO IN EMERGENCIES 4x4 Series Trucks Front Jacking Location For 2500 and 3500 4x4 series trucks, when changing the front wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the front.
Page 635 WHAT TO DO IN EMERGENCIES 633 CAUTION! Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. NOTE: If the bottle jack will not lower by turning the dial (thumbwheel) by hand, it may be necessary to use the jack drive tube in order to lower the jack.
Page 636 634 WHAT TO DO IN EMERGENCIES 5. Remove the wheel nuts and pull the wheel off. On single rear-wheel (SRW) trucks, install the spare wheel and wheel nuts with the cone shaped end of the wheel nuts toward the wheel. On 3500 dual rear-wheel models (DRW) the wheel nuts are a two-piece assem- bly with a flat face.
Page 637 WHAT TO DO IN EMERGENCIES 635 them checked with a torque wrench by you authorized dealer or service station. WARNING! A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Al- ways stow the jack parts and the extra tire and wheel in the places provided.
Page 638: To Stow The Flat Or Spare
636 WHAT TO DO IN EMERGENCIES 9. Adjust the tire pressure when possible. NOTE: Do not oil wheel studs. For chrome wheels, do not substitute with chrome plated wheel nuts. To Stow The Flat Or Spare NOTE: Have the flat tire repaired or replaced immedi- ately.
Page 639 WHAT TO DO IN EMERGENCIES 637 Pulling The Retainer Through The Center Of The Wheel Wheel Wrench And Jack Extension Tube Assembled And And Positioning It In Position 3. Attach the wheel wrench to the jack extension tube with the curved angle facing away from the vehicle. Insert the tube through the access hole between the lower tailgate and the top of the bumper and into the winch mechanism tube.
Page 640: Reinstalling The Jack And Tools (2500 And 3500 Series)
638 WHAT TO DO IN EMERGENCIES 4. Rotate the lug wrench handle clockwise until the NOTE: The winch mechanism is designed for use with wheel is drawn into place against the underside of the the jack extension tube only. Use of an air wrench or other vehicle.
Page 641 WHAT TO DO IN EMERGENCIES 639 Jack And Tools Bracket Assembly Jack Hold Down Fastener 3. Place the jack and tool bracket assembly in the storage NOTE: Ensure that the jack and tool bracket assembly position holding the jack by the jack turn-screw, slip slides into the front hold down location.
Page 642: Hub Caps/Wheel Covers - If Equipped
640 WHAT TO DO IN EMERGENCIES 4. Turn the wing bolt clockwise to secure to the floor pan. CAUTION! Reinstall the plastic cover. Use extreme caution when removing the front and rear center caps. Damage can occur to the center cap and/or the wheel if screwdriver type tools are used.
Page 643: Hoisting
WHAT TO DO IN EMERGENCIES 641 flat blade on the end of the lug wrench to pull the caps Replace the wheel skins first using a rubber mallet. When off. The wheel skin can now be removed. replacing the hub caps, tilt the cap retainer over the lug nut bolt circle and strike the high side down with a CAUTION! rubber mallet.
Page 644: Jump-Starting Procedures
642 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jump- Do not attempt jump-starting if the battery is frozen. started using a set of jumper cables and a battery in It could rupture or explode and cause personal injury.
Page 645 WHAT TO DO IN EMERGENCIES 643 WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.
Page 646: Jump-Starting Procedure
644 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 647 WHAT TO DO IN EMERGENCIES 645 Disconnecting The Jumper Cables WARNING! 1. Disconnect the negative (-) jumper cable from the Do not connect the jumper cable to the negative (-) engine ground of the vehicle with the discharged post of the discharged battery. The resulting electri- battery.
Page 648: Freeing A Stuck Vehicle
646 WHAT TO DO IN EMERGENCIES pedal pressure that will maintain the rocking motion, CAUTION! without spinning the wheels or racing the engine. Accessories plugged into the vehicle power outlets NOTE: For trucks equipped with 8-speed automatic draw power from the vehicle’s battery, even when not transmission: Shifts between DRIVE and REVERSE can in use (i.e., cellular phones, etc.).
Page 649: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 647 NOTE: Press the ESC Off switch, to place the Electronic WARNING! Stability Control (ESC) system in Partial Off mode, before rocking the vehicle. Refer to “Electronic Brake Fast spinning tires can be dangerous. Forces gener- Control”...
Page 650: Shift Lever Override
648 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be • Do not use a chain for freeing a stuck vehicle. moved out of the PARK position, you can use one of the Chains may break, causing serious injury or death.
Page 651: Center Console Shifter - If Equipped
WHAT TO DO IN EMERGENCIES 649 Center Console Shifter — If Equipped 1. Turn the engine off. 2. Firmly apply the parking brake. 3. Using a small screwdriver or similar tool, remove the shift lever override access cover (located to the right of the shift lever).
Page 652: Manual Park Release - 8 Speed Transmission
650 WHAT TO DO IN EMERGENCIES 5. Insert the screwdriver or similar tool into the access 8. Reinstall the shift lever override access cover. hole, and push and hold the override release lever MANUAL PARK RELEASE — 8 SPEED down. TRANSMISSION WARNING! Always secure your vehicle by fully applying the...
Page 653 WHAT TO DO IN EMERGENCIES 651 2. Using a small screwdriver or similar tool, remove the Manual Park Release access cover, which is just above the parking brake release handle, below and to the left of the steering column. 3. Using the screwdriver or similar tool, push the Manual Park Release lever locking tab (just below the middle of the lever) to the right.
Page 654: Towing A Disabled Vehicle
652 WHAT TO DO IN EMERGENCIES To Reset The Manual Park Release: NOTE: Vehicles equipped with air suspension must be placed in Transport mode, before tying them down (from 1. Push the locking tab to the right, to unlock the lever. the body) on a trailer or flatbed truck.
Page 655 WHAT TO DO IN EMERGENCIES 653 Towing Wheels 2WD Models 4WD Models Condition OFF the Ground Flat Tow NONE If transmission is operable: See instructions in “Recreational Tow- • Transmission in NEUTRAL ing” under “Starting and Operating” • 30 mph (48 km/h) max speed •...
Page 656: Two-Wheel Drive Models
654 WHAT TO DO IN EMERGENCIES If you must use the accessories (wipers, defrosters, etc.) If flatbed equipment is not available, and the transmis- while being towed, the ignition must be in the ON/RUN sion is operable, this vehicle may be towed (with rear position, not the ACC position.
Page 657: Four-Wheel Drive Models
WHAT TO DO IN EMERGENCIES 655 “Recreational Towing” in “Starting And Operating” for CAUTION! further information and detailed instructions. Towing this vehicle in violation of the above require- CAUTION! ments can cause severe engine and/or transmission damage. Damage from improper towing is not cov- •...
Page 659: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil ......666 ENGINE COMPARTMENT — 3.6L ..659 ▫...
Page 660 658 MAINTAINING YOUR VEHICLE ▫ Exhaust System ..... .675 ▫ Base Quad / Premium Bi-Halogen: Low Beam Headlamp, High Beam Headlamp, Front Park ▫...
Page 661: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 659 ENGINE COMPARTMENT — 3.6L 1 — Air Cleaner Filter 5 — Battery 2 — Engine Oil Dipstick 6 — Washer Fluid Reservoir 3 — Engine Oil Fill 7 — Power Distribution Center (Fuses) 4 — Brake Fluid Reservoir 8 —...
Page 662: Engine Compartment - 5.7L
660 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 5.7L 1 — Air Cleaner Filter 7 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick (6-Speed Trans Only) 8 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 9 — Power Steering Fluid Reservoir (2500/3500 Models Only) 4 —...
Page 663: Engine Compartment - 6.4L
MAINTAINING YOUR VEHICLE 661 ENGINE COMPARTMENT — 6.4L 1 — Coolant Pressure Bottle 6 — Battery 2 — Transmission Dipstick 7 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 8 — Washer Solvent 4 — Engine Oil Dipstick 9 —...
Page 664: Onboard Diagnostic System (Obd Ii)
662 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 665: Emissions Inspection And Maintenance
MAINTAINING YOUR VEHICLE 663 “Understanding Your Instrument Panel” for further in- Normally, the OBD II system will be ready. The OBD II formation. Tighten the fuel filler cap properly and press system may not be ready if your vehicle was recently the SELECT button to turn off the message.
Page 666: Replacement Parts
664 MAINTAINING YOUR VEHICLE 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced •...
Page 667: Maintenance Procedures
MAINTAINING YOUR VEHICLE 665 available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your vehicle.
Page 668: Engine Oil
666 MAINTAINING YOUR VEHICLE The best time to check the engine oil level is about five CAUTION! (Continued) minutes after a fully warmed up engine is shut off. • Your vehicle has been built with improved fluids Checking the oil while the vehicle is on level ground will that protect the performance and durability of your improve the accuracy of the oil level readings.
Page 669 CAUTION! recommends engine oils that are API Certified and meet the requirements of Chrysler Material Standard MS-6395. Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is...
Page 670 668 MAINTAINING YOUR VEHICLE Engine Oil Viscosity – 3.6L/5.7L Engines (1500 Engine Oil Viscosity – 5.7L Engine (2500/3500 Models Only) Models Only) MOPAR® SAE 5W-20 engine oil approved to Chrysler MOPAR SAE 5W-20 engine oil or equivalent Pennzoil® Material Standard MS-6395 or equivalent Pennzoil® or or Shell Helix®...
Page 671: Engine Oil Filter
Use Pennzoil Ultra™ 0W–40 engine or equivalent filters can be safely discarded in your area. MOPAR® oil meeting the Chrysler Material Standard Engine Oil Filter MS-12633 for use in all operating temperatures.
Page 672: Engine Air Cleaner Filter
670 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Engine Air Cleaner Filter Selection Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR® engine air WARNING! cleaner filters are a high quality filter and are recom- mended.
Page 673 MAINTAINING YOUR VEHICLE 671 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
Page 674: Air Conditioner Maintenance
672 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! For best possible performance, your air conditioner • Use only refrigerants and compressor lubricants should be checked and serviced by an authorized dealer approved by the manufacturer for your air condi- at the start of each warm season. This service should tioning system.
Page 675: Front Driveshaft Lubrication - 2500/3500
MAINTAINING YOUR VEHICLE 673 Refrigerant Recovery And Recycling R134a — If NOTE: Use only manufacturer approved A/C system Equipped PAG compressor oil, and refrigerants. R-134a Air Conditioning Refrigerant is a hydrofluoro- Front Driveshaft Lubrication — 2500/3500 carbon (HFC) that is endorsed by the Environmental (Four-Wheel Drive Models Only) Protection Agency and is an ozone-saving product.
Page 676: Windshield Wiper Blades
674 MAINTAINING YOUR VEHICLE attention should also be given to hood latching compo- Avoid using the wiper blades to remove frost or ice from nents to ensure proper function. When performing other the windshield. Keep the blade rubber out of contact with underhood services, the hood latch, release mechanism petroleum products such as engine oil, gasoline, etc.
Page 677: Maintaining Your Vehicle ▫ Exhaust System
MAINTAINING YOUR VEHICLE 675 To prevent freeze-up of your windshield washer system Exhaust System in cold weather, select a solution or mixture that meets or The best protection against carbon monoxide entry into exceeds the temperature range of your climate. This the vehicle body is a properly maintained engine exhaust rating information can be found on most washer fluid system.
Page 678 676 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions control and can eventually poison you.
Page 679: Cooling System
MAINTAINING YOUR VEHICLE 677 • Do not try to start the engine by pushing or towing the Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- vehicle. portant to keep the engine properly tuned to assure •...
Page 680 678 MAINTAINING YOUR VEHICLE Engine Coolant Checks engine coolant (antifreeze) from the radiator drain cock. The radiator drain cock is located in the lower radiator Check the engine coolant (antifreeze) protection every 12 tank. If the cap is sealing properly, the engine coolant months (before the onset of freezing weather, where (antifreeze) will begin to drain from the coolant expan- applicable).
Page 681 MAINTAINING YOUR VEHICLE 679 Selection Of Coolant CAUTION! (Continued) Refer to “Fluids, Lubricants, and Genuine Parts” in • Do not use water alone or alcohol-based engine “Maintaining Your Vehicle” for further information. coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not CAUTION! be compatible with the radiator engine coolant and •...
Page 682 Additive Technology (OAT) engine coolant (antifreeze) engine cooling system. that meets the requirements of Chrysler Material Stan- dard MS-12106. When adding engine coolant (antifreeze): Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- •...
Page 683 MAINTAINING YOUR VEHICLE 681 • Mixing engine coolant (antifreeze) types is not recom- WARNING! mended and can result in cooling system damage. If • The warning words “DO NOT OPEN HOT” on the HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with cooling system pressure cap are a safety precaution.
Page 684 682 MAINTAINING YOUR VEHICLE Disposal Of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by ani- mals or children, do not store ethylene glycol-based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 685 MAINTAINING YOUR VEHICLE 683 of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle.
Page 686 684 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in the bottle need only be checked once a month. When addi- coolant expansion bottle. If engine coolant (antifreeze) tional engine coolant (antifreeze) is needed to maintain needs to be added, the contents of the coolant expansion the proper level, it should be added to the coolant bottle.
Page 687: Brake System
MAINTAINING YOUR VEHICLE 685 • Do not change the thermostat for Summer or Winter WARNING! (Continued) operation. If replacement is ever necessary, install high brake temperatures, excessive lining wear, and ONLY the correct type thermostat. Other designs may possible brake damage. You would not have your full result in unsatisfactory engine coolant (antifreeze) braking capacity in an emergency.
Page 688 686 MAINTAINING YOUR VEHICLE With disc brakes the fluid level can be expected to fall as WARNING! (Continued) the brake linings wear. However, an unexpected drop in • To avoid contamination from foreign matter or fluid level may be caused by a leak and a system check moisture, use only new brake fluid or fluid that has should be conducted.
Page 689: Rear Axle And 4X4 Front Driving Axle Fluid Level
MAINTAINING YOUR VEHICLE 687 For 1500 Model axles, the fluid level should be even with WARNING! (Continued) the bottom of the fill hole (within 1/4 in (6.4 mm) of edge • Do not allow petroleum based fluid to contaminate of hole) for the FDU215 HD front axle and C235FE rear the brake fluid.
Page 690: Transfer Case
Transfer Case Limited-Slip Differentials Drain And Refill 1500 Model rear axles equipped with a Limited Slip Refer to the “Maintenance Schedule” for the proper Differential require that 5 oz. (148 ml) MOPAR® Limited maintenance intervals.
Page 691: Automatic Transmission
MAINTAINING YOUR VEHICLE 689 Automatic Transmission Special Additives The manufacturer strongly recommends against using Selection Of Lubricant any special additives in the transmission. Automatic It is important to use the proper transmission fluid to Transmission Fluid (ATF) is an engineered product and ensure optimum transmission performance and life.
Page 692 690 MAINTAINING YOUR VEHICLE Fluid Level Check — Eight-Speed Transmission Fluid Level Check — Six-Speed Transmission The fluid level is preset at the factory and does not require It is best to check the fluid level when the transmission is adjustment under normal operating conditions.
Page 693 MAINTAINING YOUR VEHICLE 691 3. Run the engine at normal idle speed for at least 60 on the dipstick at normal operating temperature. If the seconds, and leave the engine running for the rest of fluid level is low, add fluid through the dipstick tube this procedure.
Page 694 692 MAINTAINING YOUR VEHICLE Fluid And Filter Changes — Eight-Speed CAUTION! Transmission If the fluid temperature is below 50°F (10°C) it may Under normal operating conditions, the fluid installed at not register on the dipstick. Do not add fluid until the factory will provide satisfactory lubrication for the the temperature is elevated enough to produce an life of the vehicle.
Page 695: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 693 Appearance Care And Protection From Corrosion What Causes Corrosion? Corrosion is the result of deterioration or removal of Protection Of Body And Paint From Corrosion paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geo- graphic locations and usage.
Page 696 694 MAINTAINING YOUR VEHICLE • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR® Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once •...
Page 697 MAINTAINING YOUR VEHICLE 695 • If you carry special cargo such as chemicals, fertilizers, NOTE: If your vehicle is equipped with Dark Vapor de-icer salt, etc., be sure that such materials are well Chrome wheels DO NOT USE wheel cleaners, abrasives packaged and sealed.
Page 698 696 MAINTAINING YOUR VEHICLE Stain Repel Fabric Cleaning Procedure — If Interior Care Equipped Use MOPAR® Total Clean to clean fabric upholstery and Stain Repel seats may be cleaned in the following man- carpeting. ner: Use MOPAR® Total Clean to clean vinyl upholstery. •...
Page 699 MAINTAINING YOUR VEHICLE 697 To minimize the possibility of scratching the lenses and WARNING! reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- Do not use volatile solvents for cleaning purposes. lowed by rinsing.
Page 700 698 MAINTAINING YOUR VEHICLE When cleaning the rear view mirror, spray cleaner on the If the belts need cleaning, use a mild soap solution or towel or rag that you are using. Do not spray cleaner lukewarm water. Do not remove the belts from the car to directly on the mirror.
Page 701 MAINTAINING YOUR VEHICLE 699 To help maintain the appearance of your Spray-On WARNING! Bedliner, the manufacturer recommends you periodically rinse all loose dirt from your truck bed and clean your Do not use silicon-based protection products to clean truck at least twice per year using the MOPAR® your bedliner.
Page 702: Fuses
700 MAINTAINING YOUR VEHICLE to cover the metal exposed by the scratch is required. To WARNING! (Continued) repair a tear or gouge, follow the directions provided in • If the replaced fuse blows again, contact an autho- the MOPAR® Quick Repair Kit. rized dealer.
Page 703 MAINTAINING YOUR VEHICLE 701 Cavity Car- Micro Description tridge Fuse Fuse 80 Amp Rad Fan Control Module – If equipped 60 Amp Rad Fan – If Yellow Equipped 40 Amp Compressor for Air Green Suspension – If Equipped Power Distribution Center Location 40 Amp Antilock Brakes/ Green...
Page 704 Fuse Fuse Fuse 40 Amp Emissions Diesel – If 40 Amp Diesel Fuel Heater – Green Equipped Green If Equipped (Gas & (Gas & Cum- Cum- mins mins Diesel) Diesel) 20 Amp 30 Amp Yellow Pink (1500 (1500 Diesel) Diesel)
Page 705 MAINTAINING YOUR VEHICLE 703 Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 40 Amp Body Controller / 40 Amp Body Controller #4 Green Exterior Lighting #2 Green / Power Locks 50 Amp Body Controller / 30 Amp Electric Park Brake Exterior Lighting #2...
Page 706 704 MAINTAINING YOUR VEHICLE Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 30 Amp Body Controller #1 20 Amp Trailer Tow Parking Pink Yellow Lights – If Equipped 30 Amp Driver Door Module 30 Amp Trailer Tow Recep- Pink Pink...
Page 707 MAINTAINING YOUR VEHICLE 705 Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 30 Amp Sunroof – If 20 Amp Horn Pink Equipped Yellow 30 Amp Rear Defroster– If 10 Amp Snow Plow (Left) – Pink Equipped If Equipped...
Page 708 706 MAINTAINING YOUR VEHICLE Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 20 Amp Air Suspension Con- 15 Amp Additional Diesel Yellow trol Module – If Blue Content – If Equipped Equipped 10 Amp Ignition Node Mod- 20 Amp Transmission...
Page 709 MAINTAINING YOUR VEHICLE 707 Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 15 Amp Underhood Lamp 10 Amp Sunroof / Passenger Blue Window Switches / Rain Sensor 20 Amp Power Take-off Unit Yellow – If Equipped 10 Amp CD / DVD / Bluetooth Hands-...
Page 710 Electronic Stability Yellow Pump Gas/Diesel – Control (Gas En- If Equipped 10 Amp Drivetrain Control gine & Module/Front Axle 1500 LD Disconnect Module Diesel) / 10 Amp Engine Control 10 Amp Module / Electric Power Steering (Cum- 15 Amp Clearance Lights...
Page 711 MAINTAINING YOUR VEHICLE 709 Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 10 Amp Universal Garage 10 Amp Air Suspension-If Door Opener / Equipped / Trailer Compass Tow / Steering Col- umn Control Mod- 20 Amp Trailer Tow Right Yellow...
Page 712 710 MAINTAINING YOUR VEHICLE Cavity Car- Micro Description Cavity Car- Micro Description tridge Fuse tridge Fuse Fuse Fuse 10 Amp Rear Camera / Park F101 15 Amp Electrochromatic Assist Blue Mirror / Smart High Beams – If 10 Amp Rear Seat Heater Equipped Switch F104...
Page 713: Vehicle Storage
MAINTAINING YOUR VEHICLE 711 • Any time you store your vehicle or keep it out of CAUTION! service (i.e., vacation) for two weeks or more, run the • When installing the power distribution center cover, air conditioning system at idle for about five minutes in the fresh air and high blower setting.
Page 714 712 MAINTAINING YOUR VEHICLE Exterior Bulbs Bulb Number Bulb Number Fog Lamp 9145 Base Quad Headlamp – (Horizontal shape) Low Beam Fog Lamp 9006 Base Quad Headlamp – 9005 (Vertical shape) High Beam Center High Mounted Front Turn Signal Lamp 3157NA Stop Lamp (CHMSL) (Base Quad Headlamp)
Page 715: Bulb Replacement
MAINTAINING YOUR VEHICLE 713 Base Quad / Premium Bi-Halogen: Low Beam Bulb Number Headlamp, High Beam Headlamp, Front Park And Rear Lamp Bar ID Turn — If Equipped Marker Lamp 1. Open the hood. Side Marker Lamps (Dual Rear Wheels) 2.
Page 716 714 MAINTAINING YOUR VEHICLE 6. Remove the two headlamp assembly attachment 7. Reach into the front wheel house ahead of the front screws. wheel, remove the fastener, and lift the cover over the access hole in the front of the wheel house splash shield.
Page 717 MAINTAINING YOUR VEHICLE 715 11. Replace bulb(s) as necessary. CAUTION! • Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • Always use the correct bulb size and type for replacement.
Page 718: Fog Lamps - If Equipped
716 MAINTAINING YOUR VEHICLE Fog Lamps — If Equipped Rear Tail/Stop, Turn Signal And Backup Lamps 1. Reach under and behind the front bumper to access 1. Remove the two screws that pass through the bed the back of the front fog lamp housing. sheetmetal.
Page 719 MAINTAINING YOUR VEHICLE 717 2. Pull the outboard side of the lamp rearward far 4. Rotate the bulb socket counterclockwise 1/4 turn to enough to unsnap the two receptacles on the outboard unlock it from the housing. side of the lamp housing from the two plastic snap 5.
Page 720: Center High-Mounted Stoplamp (Chmsl) With Cargo Lamp
718 MAINTAINING YOUR VEHICLE Center High-Mounted Stoplamp (CHMSL) With Cargo Lamp 1. Remove the two screws holding the housing/lens to the body as shown. CHMSL Connector Location 3. Turn the desired bulb socket ¼ turn and remove the socket and bulb from housing. CHMSL Mounting Screw Locations 2.
Page 721 MAINTAINING YOUR VEHICLE 719 4. Pull the desired bulb straight from the socket. CAUTION! Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. •...
Page 722: Cab Top Clearance Lamps - If Equipped
720 MAINTAINING YOUR VEHICLE Cab Top Clearance Lamps — If Equipped 1. Remove the two screws from the top of the lamp. Removing Bulb Socket From Clearance Lamp 3. Pull the bulb straight from it’s socket and replace. Removing Rear Screw From Clearance Lamp 2.
Page 723: Rear Lamp Bar Id Marker (Dual Rear Wheels) - If Equipped
MAINTAINING YOUR VEHICLE 721 Removing The Bulb From The Bulb Socket Screw Locations Rear Lamp Bar ID Marker (Dual Rear Wheels) — If 2. Turn the socket ¼ turn counterclockwise to access the Equipped bulb. 1. Loosen the two screws and the housing to gain access 3.
Page 724: Side Marker Lamps (Dual Rear Wheels) - If Equipped
722 MAINTAINING YOUR VEHICLE Side Marker Lamps (Dual Rear Wheels) — If 3. Turn the socket ¼ turn counterclockwise and remove Equipped from assembly to access the bulb. 4. Pull the bulb straight out from socket. 5. Reverse the procedure for installation of the bulbs and housing.
Page 725: Fluid Capacities
2500/3500 trucks operating under a gross combined weight rating greater than 14,000 lbs (6 350 kg). 6.4L Engines (We recommend you use SAE 0W-40 engine oil meeting the 7 Quarts 6.6 Liters requirements of Chrysler Material Standard MS-12633 for use in all oper- ating temperatures.)
Page 726 14 Quarts 13 Liters Year/150,000 Mile Formula that meets the requirements of Chrysler Mate- rial Standard MS-12106.) 5.7L Engine – 1500 Models (We recommend you use MOPAR® 16 Quarts 15 Liters Antifreeze/Coolant 10 Year/150,000 Mile Formula that meets the require- ments of Chrysler Material Standard MS-12106.)
Page 727: Fluids, Lubricants And Genuine Parts
Engine Oil – 5.7 We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade.
Page 728 American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil Ultra™ 0W-40 or equiva- lent MOPAR® engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
Page 729: Chassis
Diesel Engine see Diesel Supplement) your transmission. We recommend MOPAR® ATF+4® fluid. Transfer Case We recommend you use MOPAR® BW44–44 Transfer Case Fluid. Front Axle – 1500 Four-Wheel Drive We recommend you use MOPAR® GL-5 Synthetic Axle Lubricant SAE Models 75W-85.
Page 730 728 MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Genuine Part Brake Master Cylinder We recommend you use MOPAR® DOT 3. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. Power Steering Reservoir – 2500/ We recommend you use MOPAR® Power Steering Fluid +4 or MOPAR® 3500 Models ATF+4®...
Page 731: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart ....733 MAINTENANCE SCHEDULE ... . .730...
Page 732 10,000 miles (16,000 km) or twelve months on cold ambient temperatures, and E85 fuel usage will 1500 trucks, whichever comes first. influence when the “Oil Change Required” message is 2500 – 3500 Models displayed.
Page 733 MAINTENANCE SCHEDULES 731 • Check the fluid levels of the coolant reservoir, brake Severe Duty All Models master cylinder, power steering (2500/3500 Models • Change Engine Oil at 4000 miles (6,500 km) if the vehicle Only) and automatic transmission (six-speed only) as is operated in a dusty and off road environment.
Page 734 732 MAINTENANCE SCHEDULES Required Maintenance At Every Oil Change Interval As Indicated By Oil Change Indicator System: Refer to the Maintenance Schedules on the following • Inspect engine cooling system protection and pages for required maintenance. hoses. At Every Oil Change Interval As Indicated By Oil •...
Page 735 MAINTENANCE SCHEDULES 733 Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level.
Page 736 734 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect the brake linings, replace as necessary. Adjust parking brake as necessary. Inspect transfer case fluid. Additional Maintenance Replace engine air filter. Replace spark plugs (3.6L engine).** Replace spark plugs (5.7L engine).**...
Page 737 MAINTENANCE SCHEDULES 735 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Replace spark plugs (6.4L engine).** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Change automatic transmission fluid and filter(s) (six-speed auto- matic only), if using your vehicle for police, taxi, fleet, or frequent trailer towing.
Page 738 736 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change automatic transmission fluid and filter (six-speed auto- matic only). Inspect the transfer case fluid, change for any of the following: police, taxi, fleet, or frequent trailer towing.
Page 739 MAINTENANCE SCHEDULES 737 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 741: If You Need Consumer Assistance
IF YOU NEED ASSISTANCE ....741 REPORTING SAFETY DEFECTS ... .745 ▫ Chrysler Group LLC Customer Center..742 ▫ In The 50 United States And Washington, D.C..
Page 742 740 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .747 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ..747 ▫...
Page 743: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 741 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 744: Chrysler Group Llc Customer Center
• Vehicle delivery date and mileage This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first. Most matters can be re- solved with this process.
Page 745: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 743 In Mexico Contact: Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 746: Warranty Information
See the Warranty Information Booklet, located on the the ownership experience. You will be pleased with their DVD, for the terms and provisions of Chrysler Group sincere efforts to resolve any warranty issues or related LLC warranties applicable to this vehicle and market.
Page 747: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 745 MOPAR® PARTS campaign. However, NHTSA cannot become involved in individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 748: Publication Order Forms
Chrysler Group LLC vehicles. ing, servicing, and repairing Chrysler Group LLC ve- Included are starting, operating, emergency and mainte- hicles.
Page 749: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 747 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 750: Temperature Grades
748 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 751 INDEX...
Page 752 750 INDEX Adding Engine Coolant (Antifreeze) ... .679 Alarm, Panic ......29 Adding Fuel .
Page 753 INDEX 751 Shifting ......390 Master Cylinder ......685 Special Additives .
Page 754 752 INDEX Center High Mounted Stop Light ....718 Cooling System......677 Center Seat Storage Compartment .
Page 755 INDEX 753 Defroster, Windshield ..... .121 Electrical Power Outlets.....222 Delay (Intermittent) Wipers .
Page 756 754 INDEX Air Cleaner ......670 Ethanol ....... .553 Block Heater .
Page 757 INDEX 755 Replacement Parts ..... . .560 Clean Air ......552 Starting .
Page 758 756 INDEX Gauges Cleaning ......697 Speedometer ......281 High Beam .
Page 759 INDEX 757 Ignition Key Removal ..... . .16 Key-In Reminder ......18 Illuminated Entry .
Page 760 758 INDEX Anti-Lock ......276 High Beam Indicator .....280 Anti-Lock Warning .
Page 761 INDEX 759 Tires ....... .520 Methanol .......553 Locks .
Page 762 760 INDEX Octane Rating, Gasoline (Fuel) ....551 Overdrive.......400 Off-Pavement Driving (Off-Road) .
Page 763 INDEX 761 Door Locks ......40 Ramp Travel Index ......451 Mirrors .
Page 764 762 INDEX Remote Starting System..... .34 Seat Belt Reminder ......66 Replacement Bulbs .
Page 765 INDEX 763 Selection of Coolant (Antifreeze)....725 Signals, Turn ......122 Sentry Key (Immobilizer) .
Page 766 764 INDEX Steering Tip Start....... .369 Power .......494 Tire and Loading Information Placard .
Page 767 INDEX 765 Rotation ......539 Trailer Sway Control (TSC) ....513 Safety .
Page 768 766 INDEX Transmitter Programming (Remote Keyless Entry) . . .23 Warnings and Cautions..... . .6 Transmitter, Remote Keyless Entry (RKE) ..23 Warranty Information .
Page 769 INDEX 767 Windshield Defroster..... . .121 Windshield Wipers ......176 Windshield Washers .
Page 771 INSTALLATION OF RADIO TRANSM ITTING EQU IPM ENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. U se frequency signals.
Page 772 Chrysler Group LLC 14D241-126-AB Second Edition Printed in U.S.A.

This manual is also suitable for:

2500 3500 2014 ram truck 1500 2014 ram truck 2500 2014 ram truck 3500

Chrysler 1500 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Chrysler 1500

Summary of Contents for Chrysler 1500