Table of Contents
Advertisement
colour components
By pressing '' / '' button, select colour components. Press '' / '' button to set the colour
components. The options are: all, red, green and blue.
solid field level
By pressing '' / '' button, select solid field level. Press '' '' button to increase or '' '' button to
decrease the solid field level. Solid field level can be adjusted between 0 and 64.
adc calibration
Not used for this model.
factory reset
By pressing '' / '' button, select factory reset. Press "OK" button to return to the factory setting
values.
advertisement
When this item is made on, VESTEL advertisement is represented at certain time intervals.
deinterlacer menu
By pressing "◄/►" buttons select the third icon. deinterlacer menu appears on the screen.
blank expansion
By pressing '' / '' button, select blank expansion. blank expansion can be set to on or off by
pressing '' / '' button.
dcti
Digital colour transition improvement: By pressing '' / '' button, select dcti. DCTI can be adjusted
between 0 and 255 by pressing '' / '' button.
dlti
Digitial luma transition improvement: By pressing '' / '' button, select dlti. DLTI can be adjusted
between 0 and 255 by pressing '' / '' button.
luminance peaking
By pressing '' / '' button, select luminance peaking. Luminance peaking can be set to on or off by
pressing '' / '' button.
film mode
By pressing '' / '' button, select film mode. Film mode speed can be set to on or off by pressing
'' / '' button.
Plasma TV Service Manual
deinterlacer
blank expansion
dcti
dlti
luminance peaking
film mode
film mode speed
vof
down for deinterlacer settings, scrolling menu
on
off
on
off
off
on
off
on
36
131
64
3
11/01/2005
Advertisement
Table of Contents
