CLUTCHING
Exploded View
Non-Braking
Spacer
Bearing
Clutch Disassembly
1.
Using a permanent marker, mark the cover, spider, and
moveable and stationary sheaves for reference, as the cast
in X's may not have been in alignment before disassembly.
2.
Remove cover bolts evenly in a cross pattern and remove
cover plate.
6.12
Bearing
Washers
Bushing
Spring
Cover
Bearing
Spider
Roller
Button
Nut
Bolt
Shift
Weight
3.
Inspect cover bushing (A). The outer cover bushing is
manufactured with a Teflon
by the amount of Teflon
Cover Bushing Inspection:
Replace the cover bushing if more
brass than Teflon™ is visible on
the bushing. Refer to bushing
replacement in this chapter.
Lock
Washer
Cover
Button
Screws
Pin
Washers
™
coating. Wear is determined
™
remaining on the bushing.
A
Bolt
Flat
Washer