Display Information; Error Message - Potterton EC three 125 Installation, Operation And Maintenance Manual

7.6 Display information

7.7 Error message

7308536-02 06.13
Setting reduced setpoint:
1. Press OK button
2. Select heating circuit.
3. Press OK button
4. Select parameter Reduced setpoint
5. Press OK button
6. Set reduced setpoint with the control knob
7. Press OK button
8. Leave programming level by pressing the operation mode button heating oper-
ation
Various temperatures and messages can be called up by pushing the information
button.
Including:
- Room and outside temperature (if sensor fitted)
- Fault or service messages
Note: When no faults occur and no service messages exist, this information is not
displayed.
If the fault sign appears in the display, a fault exists in the heating system.
- Press information button (i)
- Further information can be called up (see Fault code table).
Condensing gas boiler Eurocondense three125-300 kW
Operation
47