Temperatures For Heating And Drinking Water; Individual Time Programme; Instruction For The Customer - Potterton EC three 125 Installation, Operation And Maintenance Manual

Commissioning
6.4 Temperatures for heating
and drinking water

6.5 Individual time programme

6.6 Instruction for the customer

42
1.
Switch on heating isolator switch
2. Open gas shut-off installation
3. Open front panel cover and switch on the operating switch on the front panel
of the boiler
4.
Select the operation mode automatic operation with the operation mode but-
ton on the control unit
5.
Set the required room temperature on the rotating knob of the control unit
The information in the section Programming for setting the temperatures for heat-
ing and drinking water.
For DHW heating a setting between 50 and 60°C is recommended.
Note: The times for DHW will be set in time programme 4/ TWW. For reasons of
comfort, the start of DHW heating should be approximately 1 hour before start of
heating!
The gas condensing boiler can be commissioned having its standard values.
For setting e.g. an individual time programme, please observe section Program-
ming (tab. 5).
Instruction
The customer should be instructed in the operation of the boiler and the function
of the safety devices. The following should be pointed out:
Condensing gas boiler Eurocondense three125-300 kW
xxxxxxxxxxxxxx
Auto
7308536-02 06.13