Diagnostics Cascade/Heat Generation/Consumers - Potterton EC three 125 Installation, Operation And Maintenance Manual

Programming
Diagnostics cascade/heat
generation/consumers
(8100 - 9058)
126
The following messages are possible under Buffer:
End user (Eu)
Warm
Frost protection active
Charg el imm heater
Charging restricted
Charging active
Recooling active
Charged
Cold
No request
The following messages are possible under swimming pool:
End user (E)
Manual control active
Fault
Heating mode restricted
Heated, max Swimming pool temp
Heated
Heating mode
Cold

8.4.23 Diagnostics cascade/heat generation/consumers

Parameter not intended for operation with WGS !
Displays of different nominal and actual values, relay switching statuses and
counter statuses for diagnosis purposes.
Condensing gas boiler Eurocondense three125-300 kW
Commissioning, Engineer (menu state)
Warm
Frost protection active
El charg, emergency mode
El charg, source protection
Electric charging defrost
Electric charging, forced
Electric charging, substitute
Charging locked
Restricted, DHW priority
Forced charging active
Partial charging active
Recooling via collector
Recooling DHW / HCs
Charged, max st tank temp
Charged, min charging temp
Charged, forced temp
Charged, required temp
Part charged, required temp
Charged, min charging temp
Cold
No request
Commissioning, Technician (menu State)
Manual control active
Fault
Heating mode source
Heated, max Swimming pool temp
Heated, Setpoint solar
Heated, Setpoint source
Heating mode solar off
Heating mode source off
Cold
7308536-02 06.13