Electrode Spacing And Installation Locations; Clean Burner Pipe - Potterton EC three 125 Installation, Operation And Maintenance Manual

Maintenance
9.8 Electrode spacing and
installation locations
Fig. 38: Electrode spacing and installation locations
1 Ionisation electrode
2 Ignition electrode block

9.9 Clean burner pipe

Fig. 39: Dismantle burner pipe
136
1
8 mm
1. Removing burner (see section Installing and removing burner)
C0004611
2. Remove screws and remove burner pipe (1) with the burner pipe seal (2)
3. Clean the burner pipe with compressed air
4. Reinstall burner pipe with burner pipe seal
Note: Use a new burner pipe seal when installing the burner pipe.
5. Reinstall burner (see section Installing and removing burner)
Condensing gas boiler Eurocondense three125-300 kW
2
1
2
7308536-02 06.13