Assigning Names To The Sources - JVC KD-SX1000R Instructions Manual

Assigning names to the sources

You can assign a name to a CD and the external component connected to the LINE IN plugs.
After assigned a name, it will appear on the display when you select it.
1
2
DISP
34
Sources
CDs
External component
5
4
Select a source you want to assign a name
to.
Press and hold SEL (select) for more than 2
SEL
seconds while pressing DISP.
When you select the CD as
the source:
Maximum number of the characters
up to 32 characters (up to 40 discs)
up to 12 characters
2, 3, 7
When you select the external
component connected to the LINE
IN plugs as the source: