Using Standby Reception - JVC KD-SX1000R Instructions Manual

Using Standby Reception

Standby Reception allows the unit to switch temporarily to a programme of your favorite
programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source
(another FM station, CD, and other connected components).
Note:
Standby Reception will not work if you are listening to an AM station.
TA Standby Reception
• When TP/RDS is pressed briefly in the FM mode, the TP indicator is lit
TP
during reception of a TP station and the TA standby mode is engaged.
RDS
Note:
When the station being received is not a TP station, the TP indicator flashes. Press
¢
display, and TP station search starts. When a TP station is tuned in, the TP indicator
is lit.
• If you are listening to a CD and wish to hear a TA broadcast, press TP/RDS
to enter the TA standby mode. (The TP indicator lights up.)
If a TA programme starts broadcasting while the TA standby mode is active,
"TRAFFIC" appears and the FM mode is engaged. The volume increases to
the preset "TA VOLUME" level and the TA programme can be heard (see
page 15).
Note:
To deactivate the TA standby mode, press TP/RDS again.
PTY Standby Reception
• When PTY is briefly pressed in the FM mode, the PTY indicator is lit during
PTY
reception of a PTY station and the PTY standby mode is engaged. The
selected PTY name stored on page 12 flashes for 5 seconds.
Note:
When the station being received is not a PTY station, the PTY indicator flashes.
Press ¢
the display, and PTY station search starts. When a PTY station is tuned in, the PTY
indicator is lit.
• If you are listening to a CD and wish to hear a selected PTY broadcast,
press PTY to enter the PTY standby mode. (The PTY indicator lights up.)
If the PTY starts broadcasting while the PTY standby mode is active, the
selected PTY name appears and the FM mode is engaged. The selected
PTY can then be heard.
Note:
To deactivate the PTY standby mode, press PTY again.
or 4
to engage the TA standby mode. "SEARCH" appears on the
or 4
to engage the PTY standby mode. "SEARCH" appears on
11