Audit Log Defaults - Xerox 4635 User Interface Reference

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE

Audit Log Defaults

Figure 8-31.
Description This window allows the user to set default conditions for the
audited jobs.
Parameters Operation: - These default settings will cause the printer to stop
if the condition occurs.
STOP if Reconciliation Error - Selection of this check box
causes the following window to appear when a Reconciliation
Error is detected. When selected, a STOP command is issued
to the printer. The printer will finish all of the pages in
progress and then stop.
The system is locked up until a selection is made and the
Apply/Close header button is selected. If display is selected
the user will have to close the display select one of the
ignore options to continue.
A reconciliation error is caused by a mismatch of the
monetary value expected and the monetarty value received.
Refer to the Xerox 4635 LPS PDL/DJDE Reference for more
information.
System Control>Audit Log
Administration>Audit Log Defaults window
SYSTEM CONTROL WINDOWS
8-33