Fonts/Forms/Graphics - Xerox 4635 User Interface Reference

Fonts/Forms/Graphics

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
For example, to print a graphic image reduced to 25 percent,
enter 1/4 in the field.
Vertical Position: Specify the vertical position of the top edge
of the printed image.
Vertical Units: Inches, centimeters, dots. Select the units of
measurement for the vertical position.
Horizontal Position: Specify the horizontal position of the top
edge of the printed image.
Horizontal Units: Inches, centimeters, dots. Select the units of
measurement for the horizontal position.
Orientation: Portrait or landscape. Select the orientation of the
graphic image.
Figure 7-12.
Description In order to improve printer throughput, you can use this window
to define the maximum number of fonts, forms, and graphics
that the system stores in memory during a print job.
Parameters Fonts: Enter the maximum number of active fonts per print job.
No single printed page can have more fonts than this number.
This number must include all fonts used on the form, as well as
variable data.
If the number of fonts specified is exceeded during a print job,
the job aborts and a message is displayed.
Forms: Enter the maximum number of active forms per print
job. Specifying a number larger than one allows form changes
on a page-to-page basis without negative effects on printing
speed, as long as there is room for all the forms in system
memory.
Graphics: Enter the maximum number of active graphics per
print job. No single printed page may call for more than 128
graphics. This number must also include all graphics used on a
form for the page, if a form is used.
Job Control> Fonts/Forms/Graphics window
JOB CONTROL WINDOWS
7-11