Convert - Xerox 4635 User Interface Reference

SYSTEM CONTROL WINDOWS

Convert...

Select the Convert option from the auxiliary menu to open the
Convert window. This window allows you to convert the
specified log to other formats, such as ASCII, for manipulation by
your own software utilities. The console log is converted using
the currently selected language.
Converted console logs can be copied to a floppy diskette using
DOS backup commands.
Figure 8-19. System Control>Console Log>Convert window
Header buttons Apply/Close: Select the Apply/Close header button to start the
conversion and automatically close the window after the process
is complete. Both the Apply/Close and the Close header buttons
are unavailable until the conversion is complete. The amount of
time it takes to convert the console log depends upon how full
the log is.
Parameters Save converted Console Log as: Enter name under which you
want to save the converted console log.
Format: ASCII (DOS), ASCII (UNIX), EBCDIC. Select/enter the
file format to which you want the console log converted.
Overwrite: Select this option to overwrite the file on the PC UI
hard disk.
Notes The size of the console log is limited to the amount of data that
can be held on one high-density floppy disk, which is 1.44 Mb
(about 60,000 lines).
The system must be idle to start printing of the console log, but
once in progress, other activities may be performed (printing,
utilities, and so on.)
Messages are displayed informing you that the console log will
be overwritten.
Messages are displayed to indicate when the console log is 70%,
80%, 90%, and 100% full.
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE 8-17