Fm Mode Operation; Basic Peration - Yaesu FT DX 1200 Operation Manual

FM M
ODE
ress the [ MODE ] button repeatedly, until the "FM"
1.
icon appears in the display, to select the F
ing mode.
. otate the ain Tuning
sired operating fre uency. ressing the microphone
[ UP ] or [ DWN ] buttons will cause fre uency change
in kH steps.
3. ress the microphone PTT switch or press the front
panel [ MOX ] button) to transmit. Speak into the mi-
crophone in a normal voice level. elease the PTT
or [ MOX ] switch to return to receive.
4. djustment of the microphone gain may be accom-
plished in two ways. t the factory, a default level
has been programmed that should be satisfactory for
most situations. However, using
FM MIC GAIN", you may set a different xed value,
or choose the "MCVR" option, which then lets you
use the front panel [ MIC/SPEED ] knob to set the
microphone gain in the F
A :
DVICE
You may change the tuning step of the
ial knob via enu item "153 AM FM DIAL STEP".
You may change the tuning step of the microphone
[ UP ] [ DWN ] button via the
CH STEP".
The Transmit onitor is
fy proper adjustment of the F
ing the [ MONI ] button, you will be able to hear
differences in deviation as you make adjustments.
F is only used in the 8
teur bands covered by the FT
use F on any other bands.
Page 90
O
PERATION
B
ASIC
operat-
ial knob to select the de-
enu item "085
mode.
ain Tuning
enu item "157 FM
another helpful way to veri-
IC Gain. By press-
the
H and 0 H ma-
1200. lease do not
DX
O
PERATION
[ MIC/SPEED ] Knob
[ MOX ] Button
FT
DX
[ MODE ] Button
Main Tuning Dial Knob
1200 O M
PERATING ANUAL