Memory Tune Operation - Yaesu FT DX 1200 Operation Manual

Memory Tune Operation

You may freely tune off from any memory channel in a " emory Tune" mode, this is similar to VF operation. So long
as you do not over-write the contents of the current memory,
memory channel.
ress the [ V/M ] button to recall any memory chan-
1.
nel.
ress the [ MCH/GRP ] button.
.
otate the [ VFO-B/CLAR ] knob to select the mem-
3.
ory channel.
4. otate the ain Tuning
[ MODE ] button you will now observe that the
memory channel fre uency is changing.
A :
DVICE
uring emory Tune operation, you may change
operating modes, and engage the offset Clari er,
if desired.
ress the [ V/M ] button momentarily to return to the
.
originally memori ed fre uency of the current mem-
ory channel. ne more press of the [ V/M ] button will
return to VF operation.
FT 1200 O
DX PERATING
S M
TANDARD EMORY
ial knob or press the
M
ANUAL
M
EMORY
O
PERATION
emory Tune operation will not alter the contents of the
N :
OTE
Computer software programs utili ing the C T sys-
tem interface port may presume that the transceiver is
operating in the VF mode, for certain features like
"band mapping" and or fre uency logging, because the
" emory Tune" mode so closely resembles the VF
mode. Be sure that you have the FT
a control mode compatible with your software's re uire-
ments. Use the VF mode if you're not sure.
O
PERATION
[ V/M ] Button
[ MODE ] Button
Main Tuning Dial Knob
1200 operating in
DX
Page 97