Cw Group; Group - Yaesu FT DX 1200 Operation Manual

M M
ENU ODE
MODE-AM G
050 AM LCUT FREQ
Function Selects the cutoff fre uency of the lower side
of the audio lter in the
vailable Values FF 100 1000 H
efault Setting FF
051 AM LCUT SLOPE
Function Selects the lter slope of the lower side of the
audio lter in the mode.
vailable Values 6dB oct
efault Setting 6dB oct
052 AM HCUT FREQ
Function Selects the cutoff fre uency of the upper side
of the audio lter in the
vailable Values FF 700 4000 H
efault Setting FF
053 AM HCUT SLOPE
Function Selects the lter slope of the upper side of the
audio lter in the mode.
vailable Values 6dB oct
efault Setting 6dB oct
054 AM MIC GAIN
Function Sets the microphone gain for the
vailable Values VC 0 100
efault Setting 30
When this menu is set to " CV ", you may adjust the
microphone gain using the front panel [ IC S
knob.
055 AM MIC SEL
Function Selects the microphone to be used in the
mode.
vailable Values F T
efault Setting F T
F T Selects the microphone connected to the
front panel IC jack while using the
mode.
T Selects the microphone connected to pin 1 of
the C T ack while using the
Page 116
ROUP
mode.
0 H step)
18dB oct
mode.
0 H step)
18dB oct
mode.
]
T
mode.
MODE-CW G
056 CW PITCH
Function djusts your preferred CW tone pitch.
vailable Values 300 10 0 H 10 H step)
efault Setting 700 H
057 CW LCUT FREQ
Function Selects the cutoff fre uency of the lower side
of the audio lter in the CW mode.
vailable Values FF 100 1000 H
efault Setting 0
058 CW LCUT SLOPE
Function Selects the lter slope of the lower side of the
audio lter in the CW mode.
vailable Values 6dB oct
efault Setting 18dB oct
059 CW HCUT FREQ
Function Selects the cutoff fre uency of the upper side
of the audio lter in the CW mode.
vailable Values FF 700 4000 H
efault Setting 1 00
060 CW HCUT SLOPE
Function Selects the lter slope of the upper side of the
audio lter in the CW mode.
vailable Values 6dB oct
efault Setting 18dB oct
061 CW AUTO MODE
Function nables disables CW keying while operating
on SSB.
vailable Values FF 0
efault Setting FF
FF isables CW keying while operating on SSB.
0 nables CW keying only while operating SSB on
0 H but not HF).
n nables CW keying while operating on SSB all
T bands).
062 CW BFO
Function Sets the CW carrier oscillator injection side
for the CW mode.
vailable Values USB LSB UT
efault Setting USB
USB Injects the CW carrier oscillator on the USB
side.
LSB Injects the CW carrier oscillator on the LSB
side.
UT Injects the CW carrier oscillator on the LSB
side while operating on the 7
below, and the USB side while operating on the
10 H band and up.
FT 1200 O
DX
ROUP
0 H step)
18dB oct
0 H step)
18dB oct
H band and
M
PERATING ANUAL