Denso BHT-700QWB-CE User Manual page 89

[3] ActiveSync(USB)
Tap "3:ActiveSync(USB)" at the Communication menu to connect to the
host computer via USB using the connector interface port.
The screen on the right displays when a connection has been
established.
Refer to "Chapter 5 Communication" – "5.6 ActiveSync" for further details
on configuration of the host computer and connection using ActiveSync.
The BHT can be set up to enable ActiveSync to start up automatically and connect to the
− Note −
host computer by connecting the USB cable to the BHT with the power ON.
Refer to "4.4.3 System Properties" for further details.
If ActiveSync connection is successful...
If ActiveSync connection is successful, the beeper sounds once and the
ActiveSync icon displays in the task tray (circled in red on right).
If ActiveSync connection fails...
If ActiveSync connection fails, the ActiveSync icon does not display.
2D Code Handy Terminal
71