Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
[8] NIC Control
Double-tap "Radio Frequency" at the System Properties screen to display
the screen on the right.
This menu can be used to perform the following processes.
• Displaying the wireless module version and opening/closing the
wireless device
• Displaying the IP address and MAC address
• Setting the wireless options
• Displaying the current communication status
• Performing a Ping test
Displaying the Wireless Module Version and Opening/Closing the Wireless Device
Tap the "Info" tabbed page at the NIC Control menu to display the screen
on the right.
This menu displays the following information.
Driver Version:
Firmware Version:
Furthermore, wireless devices can also be opened and closed by tapping
the [RF Open], [RF Close] and [RF Close Continuously] buttons.
If the wireless device is opened by tapping [RF Open], closing the NIC Control menu
− Note −
automatically closes the device. If necessary to display another window while keeping the
wireless device open, tap the taskbar of NIC Control to minimize its window.
If the wireless device is opened by tapping [RF Open Continuously], the device remains
continuously open even if the NIC Control menu is closed. To close the wireless device,
open this menu again and tap the [RF Close] button.
88
Wireless driver version
Wireless module firmware version
Advertisement
Table of Contents
