Table of Contents
Advertisement
9.7 Inserting the MicroSD Card
Insert the MicroSD card (option) into the BHT using the following procedure.
Always turn the BHT power OFF before removing the MicroSD card. Failure to observe this may result in
− Caution −
the loss of data stored in the card.
1.
Remove the battery cartridge.
2.
Slide the MicroSD card cover in the (1) OPEN
direction and then open the (2) MicroSD card cover.
3.
Align the MicroSD card with the slot so that the
terminals are facing downward and insert the card.
4.
Close the (1) MicroSD card cover and then slide the
(2) MicroSD card cover in the CLOSE direction.
5.
Load the battery cartridge.
2D Code Handy Terminal
161
Advertisement
Table of Contents
