Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
If an error occurs during the IrDA interface test...
If the test is aborted due to a timeout error, a warning beeper sounds
three times and the screen on the right displays at the BHT being tested
(slave).
In this example screen, an error occurred at a communication speed of
2400 bps.
If the test is aborted due to a mismatch between the sent and received
data, a warning beeper sounds three times and the screen on the right
displays at the BHT being tested (slave).
In this example screen, although the data sent at 2400 bps is "17", the
received data is "196".
USB Interface Test
Connect the BHT and host computer with the USB cable.
Tap "2:USB" at the COM menu to display the screen on the right and
commence connection to the host computer using ActiveSync.
Refer to "Chapter 5 Communication" – "5.6 ActiveSync" for details of the
host computer configuration and ActiveSync.
102
Advertisement
Table of Contents
