Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
[2] ActiveSync(Infrared)
Tap "2:ActiveSync(Infrared)" at the Communication menu to connect to
the host computer via the IrDA interface port.
The screen on the right displays when a connection has been
established.
Refer to "Chapter 5 Communication" – "5.6 ActiveSync" for further details
on configuration of the host computer and connection using ActiveSync.
When connecting the BHT to the host computer, ensure that the BHT and host computer
− Note −
IrDA interface ports are facing each other directly.
When using the CU-733 with RS-232C interface port to connect the BHT to the host, it is
not possible to establish a connection using ActiveSync.
If ActiveSync connection is successful...
If ActiveSync connection is successful, the beeper sounds once and the
ActiveSync icon displays in the task tray (circled in red on right).
If ActiveSync connection fails...
If ActiveSync connection fails, the ActiveSync icon does not display.
70
Advertisement
Table of Contents
