Denso BHT-700QWB-CE User Manual page 130

BHT-700QWB-CE/700QWBG-CE
Security and Setting Method
The security level can be changed based on the encryption and authentication combination. The setting
parameters for each security level are shown in the table below.
Parameter
Encryption
Authentication
Network key
Key index
The key is
provided
automatically
Enable
802.1X
authentication
EAP type
–： No entry possible
√：
Select
∗
： No entry or no selection
xxxxxx： Enter the network key.
Authentication Settings
The [Properties] button is enabled when PEAP or TLS is selected for the
"EAP type".
Tap the [Properties] button to display the screen on the right showing the
"User Certificate" issuance information.
Select the "Validate Server" check box to enable the certificate server.
The server is enabled by default.
The [Select..] button is enabled when TLS is selected for the "EAP type".
Tap the [Select..] button to display the screen on the right showing the
certificate list.
Select a certificate from the list and tap the [View Certificate...] button to
display detailed information.
112
PEAP
None
(802.1x)
Disabled WEP WEP
– Open Open
– xxxxxx –
– 1 to 4 –
∗
– √
∗
– √
– – PEAP
Security
EAP-TLS PEAP EAP-TLS
(802.1x) (WPA) (WPA)
WEP TKIP TKIP
Open WPA WPA
– – –
– – –
√ – –
√ – –
TLS PEAP TLS
PSK PEAP EAP-TLS
(WPA) (WPA2) (WPA2)
TKIP AES AES
WPA
WPA2 WPA2
-PSK
xxxxxx – –
– – –
– – –
– – –
Ignored PEAP TLS
PSK
(WPA2)
AES
WPA2-
PSK
xxxxxx
–
–
–
Ignored