Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
3.3 Using the Keypad
3.3.1
Entering Numerical Data
27-Keypad
The default setting is numeric entry mode, enabling numbers written on the left of the top of numeric keys to
be entered.
To enter "120" for example, press the "1", "2" and "0" keys sequentially.
If the wrong number is incorrectly entered, press the BS key to delete the number and then reenter the
correct number.
42-Keypad
Press the NUM key to switch to numeric entry mode.
Numbers or symbols written on the right of the top of alphabet keys can be entered.
Incorrectly entered numbers or symbols can be deleted with the BS key.
Press the NUM key again to return to alphabet entry mode.
It is also possible to switch to alphabet entry mode at the program. Refer to the "BHT-700-CE API Reference
Manual" or "BHT-700-CE Class Library Reference Manual" for further details.
3.3.2
Entering Alphabet Data
27-Keypad
The 27-Keypad is equipped with two alphabet entry methods - "alphabet entry mode 1" and "alphabet entry
mode 2".
Press the AL key to switch to alphabet entry mode 1.
Press the AL key again to switch to alphabet entry mode 2.
Press the AL key once again to return to numeric entry mode.
Numeric entry mode
In the same manner as that for alphabet character entry with a cellular phone, alphabet characters can be
entered using the numerical keys.
In alphabet entry mode 1, press a numerical key to display the alphabet character assigned to that key in the
ALP window.
(Refer to "Chapter 1 Outline" – "1.2.3 BHT Screen".) and then press the ENT key to set that character. Press
the AL key again to return to numeric entry mode.
In alphabet entry mode 2, by pressing the same key repeatedly, characters display not in the ALP window,
but in order at the cursor position.
The cursor position will shift if a different key is pressed.
42-Keypad
The default setting is alphabet entry mode, enabling alphabet characters written on the left of the top of
alphabet keys to be entered.
Incorrectly entered characters can be deleted with the BS key.
It is also possible to switch to alphabet entry mode at the program. Refer to the "BHT-700-CE API Reference
Manual" or "BHT-700-CE Class Library Reference Manual" for further details.
36
AL key
Alphabet entry mode 1
AL key
Alphabet entry mode 2
Advertisement
Table of Contents
