Panasonic DMR-EH80V Operating Instructions Manual page 13

Remote control
SETUP
Remote Control
MODE 1
Clock
Remote Control
Power Save
Automatisch
Tuning
MODE 1
Quick Start
Disc
MODE 2
Language Deutsch
Picture
MODE 3
Shipping Condition
Sound
Display Default Settings
Connection
SELECT
Others
RETURN
ENTER
RETURN
If you use another Panasonic unit at the same location, change the mode
of the remote control so that you can operate the units independently of each other.
Setting the remote control
Setting the remote control mode for unit.
Press FUNCTIONS in stop mode.
Use
Use
Aus
Use
Use
Select the desired mode on the remote control.
Press and hold the
enter the number that corresponds with the selected mode (1, 2 or 3).
Press RETURN to exit the me
Setting options
MODE1: Select this setting for normal use.
If the mode of the remote control does not correspond with that of the unit,
[REMOTE MODE 1 / 2 / 3] will appear on the unit display.
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the displayed mode (1, 2 or 3).
If you want to operate two units independently of each other with the same remote control,
then change the mode of the remote control.
The input must be repeated after batteries are changed.
to select [To Others] and confirm with ENTER.
to select SETUP and confirm with ENTER.
to select [Others], to select [Remote Control] and confirm with ENTER.
to select the desired mode [MODE 1, 2 or 3] and confirm with ENTER.
ENTER button for approx. 2 seconds and, at the same time,
nu.
13