Windshield Wiper Motor Replacement
1 . Open the hood. Remove the nuts (A) and the
w i n d s h i e l d w i p e r a r m s ( B ) .
Remove the hood seal and cowl cover.
Djsconnect the 5P connector (A) from the wiper
motor (B).
9.8 N.m (1.0
R e m o v e t h e b o l t s ( C ) , m o v e w i n d s h i e l d w i p e r
l i n k a g e a s s e m b l y { D ) t o w a r d t h e p a s s e n g e r ' s s i d e
of the vehicle until it slides off of the pin (E), then
remove the assembly.
5 . S c r i b e a l i n e ( A ) a c r o s s t h e l i n k a n d w l n d s h i e l d
wiper linkage to show the original adjustment.
S e p a r a t e t h e w i n d s h i e l d w i p e r l i n k a g e ( B ) f r o m t h e
w i p e r m o t o r ( C ) .
N . m
(3.2 ksf.m, 23 lbt.ft)
Install in the reverse order of removal, and note
lhese items.
Apply multipurpose grease to the moving parts.
Before reinstalling the wiper arms, turn the wiper
switch ON, then OFF to return the wiper shafts to
the oark oosition.
lf necessary, replace any damaged clips,
Check the wioer motor oDeration.
22-145