Setting Table - Potterton Paramount two Installation, Operation & Maintenance Manual

Programming
8.3

Setting table

Table 10: Setting the parameters
Function
Time and date
Hours/minutes
Day/month
Year
Operating unit
Language
Contrast of display
Operation lock
OFF | ON
Programming lock
OFF | ON
38
Acknowledge setting with
Press heating circuit operation mode but-
ton to return to the basic display.
The previous menu point will be called up by pressing the ESC-but-
ton without taking over previously modified values.
If no settings are carried out for approximately 8 minutes, the
basic display is called up without taking over previously modified
values.
• Not all parameters displayed in the display are listed in the set-
ting table.
• Depending on the plant configuration, not all parameters listed
in the setting table are displayed in the display.
• In order to get to the setting levels: Enduser (E), Commissioning
(I) and Engineer (F), press button OK.; After this, press for ap-
proximately 3 s the Information button, select the required le-
vel with the rotating knob and acknowledge with the OK button.
.
Set-
Prog.
ting
Standard value
-No.
1
level
1 E 00:00 (h:min)
2 E 01.01 (day.
month)
2004 (year)
3 E
English
20 E
25 E 162
Off
26 F
27 F Off
POTTERTON COMMERCIAL
Time and date
Hours/minutes
Boiler temperature
Modi-
fied
value